《（BS英国标准）BS EN 50272-2-2001 二次蓄电池和电池装置的安全要求.二次蓄电池 (Safety requirements for secondary batteries and battery installations - Stationary batteries).doc》由会员分享，可在线阅读，更多相关《（BS英国标准）BS EN 50272-2-2001 二次蓄电池和电池装置的安全要求.二次蓄电池 (Safety requirements for secondary batteries and battery installations - Stationary batteries).doc（35页珍藏版）》请在三一文库上搜索。
1、Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue Oct 02 01:20:21 GMT+00:00 2007, Uncontrolled Copy, (c) BSIBRITISH STANDARD BS EN50272-2:2001Safety requirements for secondary batteriesand battery installations Part 2: Stationary batteriesThe European Standard EN 50272-2:
2、2001 has the status of aBritish StandardICS 29.220.20; 29.220.30NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBS EN 50272-2:2001National forewordThis British Standard is the official English language version ofEN 50272-2:2001.The UK participation in its preparation was entrus
3、ted to Technical CommitteePEL/21, Secondary cells and batteries, which has the responsibility to:aid enquirers to understand the text;present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed;monitor related interna
4、tional and European developments and promulgate them in the UK.A list of organizations represented on this committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in t
5、he BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue.A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are re
6、sponsible for their correct application.Compliance with a British Standard does not of itself confer immunity from legal obligations.Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue Oct 02 01:20:21 GMT+00:00 2007, Uncontrolled Copy, (c) BSIThis British Standard, having b
7、een prepared under the direction of the Electrotechnical Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on4 September 2001 BSI 4 September 2001ISBN 0 580 38440 3Summary of pagesThis document comprises a front cover, an inside fr
8、ont cover, the EN title page,pages 2 to 31 and a back cover.The BSI copyright date displayed in this document indicates when the document was last issued.Amd. No.DateCommentsAmendments issued since publicationEUROPEAN STANDARDEN 50272-2NORME EUROPENNEEUROPISCHE NORMJune 2001ICS 29.220.20English vers
9、ionSafety requirements for secondary batteries and battery installationsPart 2: Stationary batteriesRgles de scurit pour les batteries et les installations de batteriesPartie 2: Batteries stationnairesSicherheitsanforderungen an Batterien und BatterieanlagenTeil 2: Stationre BatterienLicensed Copy:
10、Institute Of Technology Tallaght, Institute of Technology, Tue Oct 02 01:20:21 GMT+00:00 2007, Uncontrolled Copy, (c) BSIThis European Standard was approved by CENELEC on 2000-08-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for givi
11、ng this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.This European Standard exists in three official ver
12、sions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.CENELEC members are the national electrotechnical committees of
13、 Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.CENELECEuropean Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechniq
14、ue Europisches Komitee fr Elektrotechnische NormungCentral Secretariat: rue de Stassart 35, B - 1050 Brussels 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.Ref. No. EN 50272-2:2001 EPage 31EN 502722:2001Licensed Copy: Institute Of Techn
15、ology Tallaght, Institute of Technology, Tue Oct 02 01:20:21 GMT+00:00 2007, Uncontrolled Copy, (c) BSIForewordThis European Standard was prepared by the Technical Committee CENELEC TC 21X, Secondary cells and batteries.The text of the draft was submitted to the formal vote and was approved by CENEL
16、EC on 2000-08-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identicalnational standard or by endorsement(dop)2001-12-01 latest date by which the national standards conflictingwith the EN have to be withdrawn (dow) 2003-04
17、-01Annexes designated informative are given for information only. In this standard, annexes A and B are informative._Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue Oct 02 01:20:21 GMT+00:00 2007, Uncontrolled Copy, (c) BSIIntroductory note1.For the preparation of EN 50
18、272-2 the following European countrys national standards have been taken into consideration:Germany: DIN VDE 0510 Part 2Batteries and battery installationsUnited Kingdom: BS 6133 for lead-acid batteriesBS 6132 for NiCd batteriesSweden:SS 408 01 10 relating parts for rechargeable batteries, erection
19、and ventilationSwitzerland: SEV 1000-1 and SEV 1000-2 relating parts of instructions for installations in buildingsItaly: Doc. D.P.R. 547, art. 302 and 303 , Safety in battery installationsCEI 21-6 Part 3Netherlands: NEN 1010 relating parts of safety regulations for low voltage installationsAustria
20、VE-C10 Part 2 ,Batteries and battery installationsFranceNF C15-100 , article 554Batteries daccumulateursArticle EC10, Rglement de securit contre lincendie relatif aux tablissemments recevant du publicOnly those paragraphs have been considered where common agreement was found or specific need was rec
21、ognised.2.The described safety requirements comprise the protective measures to protect from hazards generated by the electricity, the electrolyte, and the explosive gases when using secondary batteries. In addition measures are described to maintain the functional safety of batteries and battery in
22、stallations.3.For the electrical safety (protection against electric shock) under clause 5 this document refers to HD 384.4.41 (IEC 60364-4-41). The pilot function of this standard is fully observed by indication of cross-reference numbers of the relevant clauses. But interpretation is given where a
23、doption to direct current (DC) circuits is required.4.This safety standard comes into force with the date of publication and applies to all new batteries and battery installations. Previous installations shall conform with the existing national standards at the time of installation. In case of redes
24、ign of old installations this standard applies.Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue Oct 02 01:20:21 GMT+00:00 2007, Uncontrolled Copy, (c) BSICo n t e n t sPage1Scope. 52Main applications . 53Normative references. 54General definitions . 65Protection against
25、electric shock . 86Disconnection and separation. 147Prevention of short circuits and protection from other effects of electric current . 148Provisions against explosion hazards . 169Provision against electrolyte hazard . 1910Accommodation, housing . 2011Charge current requirements . 2212Identificati
26、on labels, warning notices and instructions for use, installation and maintenance . 2313Transportation, storage, disposal and environmental aspects . 2414Inspection and monitoring . 24Annex A (informative) Charging methods, modes of operation . 25Annex B (informative) Calculation of safety distance
27、d to protect against explosion hazards . 29Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue Oct 02 01:20:21 GMT+00:00 2007, Uncontrolled Copy, (c) BSI 1ScopeThis European Standard applies to stationary secondary batteries and battery installations with a maximum voltage
28、of DC 1500 V (nominal) and describes the principal measures for protections against hazards generated from:- electricity,- gas emission,- electrolyte.It provides requirements on safety aspects associated with the erection, use, inspection, maintenance and disposal.It covers lead-acid and NiCd batter
29、ies. 2Main applicationsExamples for the main applications are:- Telecommunications,- Power Station Operation,- Central Emergency Lighting and Alarm Systems,- Uninterruptible Power Supplies,- Stationary Engine Starting,- Photovoltaic Systems. 3Normative referencesThis European Standard incorporates b
30、y dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Stan
31、dard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments).EN 166Eye protectionEN 345Safety footwear for professional useEN 50091-1-2Uninterruptible power systems (UPS)General and safety requirem
32、ents for UPS used in restricted access locationsEN 50178Electronic equipment for use in power installationsEN 60079-10Electrical apparatus for explosive gas atmospheresPart 10: Classification of hazardous areas (IEC 60079-10)EN 60529Degrees of protection provided by enclosures (IP code) (IEC 60529)E
33、N 60623Vented nickel-cadmium prismatic rechargeable single cells(IEC 60623)EN 60896-1Stationary lead-acid batteries - General requirements and methods of testPart 1: Vented types (IEC 60896-1)EN 60896-2Stationary lead-acid batteries - General requirements and methods of testPart 2: Valve-regulated t
34、ypes (IEC 60896-2)EN 60900Hand tools for live working up to 1 kV a.c. and 1,5 kV d.c. (IEC 60900, mod.)EN 60950Safety of information technology equipment (IEC 60950, mod.)EN 60990Methods of measurement of touch-current and protective conductor current (IEC 60990)Licensed Copy: Institute Of Technolog
35、y Tallaght, Institute of Technology, Tue Oct 02 01:20:21 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 61140Protection against electric shock - Common aspects for installation and equipment (IEC 61140)EN 61660-1Short-circuit currents in d.c. auxiliary installations in power plants and substations - P
36、art 1: Calculation of short-circuit currents (IEC 61660-1)EN 61660-2Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 2: Calculation of effects (IEC 61660-2)HD 193Voltage bands for electrical installations of buildings(IEC 60449)HD 366Classification of ele
37、ctrical and electronic equipment with regard to protection against electric shock (IEC 60536)HD 384.4.41Electrical installations of buildingsPart 4: Protection for safety - Chapter 41: Protection against electric shock (IEC 60364-4-41, mod.)HD 384.4.43Electrical installation of buildingPart 4: Prote
38、ction for safety - Chapter 43: Protection against overcurrent(IEC 60364-4-43)HD 384.5.53Electrical installation of buildingsPart 5: Selection and erection of electrical equipment (IEC 60364-5-53)HD 384.5.54Electrical installations of buildingsPart 5: Selection and erection of electrical equipmentCha
39、pter 54: Earthing arrangements and protective conductors(IEC 60364-5-54, mod.)HD 384.7.706Electrical installation of buildingsPart 7: Requirements for special installations or locationsSection 706: Restrictive conductive locations (IEC 60364-7-706)HD 625.1Insulation co-ordination for equipment in lo
40、w-voltage systemsPart 1: Principles, requirements and tests (IEC 60664-1)IEC 60050-486International Electrotechnical Vocabulary, Chapter 486: Secondary cells and batteriesIEC/TR 60755General requirements for residual current operated protective devicesIEC 61201Extra-low voltage (ELV) - Limit valuesI
41、EC 61340-4-1Electrostatics - Part 4: Standard test methods for specific applications - Section 1: Electrostatic behaviour of floor coverings and installed floorsISO 3864Safety colours and safety signsEC Directive 91/157/EECBatteries and accumulators containing certain dangerous substancesEC Directive 93/86/EECAdaptation to technical progress of Directive 91/157/EEC 4General definitions4.1 (secondary) cell; (rechargeable) cell; single cellAn assembly of electrodes and electrolyte which con