《BS EN 13427-2004 Packaging — Requirements for the use of European Standards in the field of packaging and packaging waste.pdf》由会员分享，可在线阅读，更多相关《BS EN 13427-2004 Packaging — Requirements for the use of European Standards in the field of packaging and packaging waste.pdf（16页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13427:2004 Packaging Requirements for the use of European Standards in the field of packaging and packaging waste The European Standard EN 13427:2004 has the status of a British Standard ICS 13.030.99; 55.020 ? BS EN 13427:2004 This British Standard was published under the aut
2、hority of the Standards Policy and Strategy Committee on 21 July 2004 BSI 21 July 2004 ISBN 0 580 44134 2 National foreword This British Standard is the official English language version of EN 13427:2004. It supersedes BS EN 13427: 2000 which is withdrawn. The UK participation in its preparation was
3、 entrusted to Technical Committee PKW/4, Packaging and the environment, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications re
4、ferred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary pro
5、visions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretatio
6、n, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 13 and a back cover. The BSI copyright n
7、otice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13427 July 2004 ICS 13.030.99; 55.020Supersedes EN 13427:2000 English version Packaging - Requirements for the
8、use of European Standards in the field of packaging and packaging waste Emballage - Exigences relatives lutilisation des normes europennes dans le domaine de lemballage et des dchets demballage Verpackung - Anforderungen an die Anwendung der Europischen Normen zu Verpackungen und Verpackungsabfllen
9、This European Standard was approved by CEN on 5 May 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical referenc
10、es concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into
11、its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, L
12、uxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2004 CENAll rights o
13、f exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13427:2004: E EN 13427:2004 (E) 2 Contents Page Foreword3 1 Scope 5 2 Normative references5 3 Terms and definitions .5 4 Rationale and methodology6 4.1 General approach 6 4.2 Assessment of environmen
14、tal impact of the four heavy metals and dangerous substances in packaging6 4.3 Levels of application .7 5 Requirements.7 5.1 Consideration and selection of appropriate assessment procedures.7 5.2 Application of selected assessment procedures.8 5.3 Documentation of assessment data8 6 Procedure.9 6.1
15、Objective.9 6.2 Application .9 6.3 Review of results .9 Annex A (informative) Relationship between Directive 94/62 and the designated assessment criteria for packaging 10 Annex B (informative) Example format for statement of compliance with this standard11 Annex ZA (informative) Relationship between
16、 this European Standard and the Essential Requirements of EU Directive 94/62/EC12 Bibliography13 w w w . b z f x w . c o m EN 13427:2004 (E) 3 Foreword This document (EN 13427:2004) has been prepared by Technical Committee CEN/TC 261 “Packaging”, the secretariat of which is held by AFNOR. This Europ
17、ean Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2005, and conflicting national standards shall be withdrawn at the latest by January 2005. This document supersedes EN 13427:2000. This document has b
18、een prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this document. This standard provides th
19、e procedure for applying a series of standards and reports prepared under Mandate M 200 rev.3 and the second standardisation Mandate M 317, given to CEN by the European Commission and the European Free Trade Association to support the European Parliament and Council Directive on Packaging and Packag
20、ing Waste 94/62/EC. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard : Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Irela
21、nd, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. w w w . b z f x w . c o m EN 13427:2004 (E) 4 Introduction Packaging is required to conform to a significant range of functional and legal demand
22、s. This standard addresses compliance with requirements of the Packaging and Packaging Waste Directive (94/62/EC). This Directive states in the preamble : “whereas in order to minimise the impact of packaging and packaging waste on the environment and to avoid barriers to trade and distortion of com
23、petition, it is also necessary to define the essential requirements governing the composition and the reusable and recoverable (including recyclable) nature of packaging“. NOTE The directive 94/62/EC is amended by European Parliament and Council Directive 2004/12/EC of 11 February 2004. The essentia
24、l requirements as defined in article 9 and annex II of the Directive, together with the specific restrictions relating to heavy metals contained in article 11, are focused on the environmental impact of packaging after use. This standard and the other five mandated standards and one mandated CEN Rep
25、ort (in two parts) which have been developed to assist the presumption of compliance with the essential requirements are consequently designed to meet this specific aspect. Compliance with the essential requirements through the use of European Standards, will involve the supplier, in cooperation wit
26、h all other entities in the packaging chain, in the consideration of this standard in addition to those referred to in the previous paragraph. Although the essential requirements of the directive are focused on the effects of packaging after use, it is necessary that these individual but associated
27、Reports or Standards be addressed prior to placing the packaging and packed products on the market. Account should be taken of the potential change in releases to the environment that will result from introducing the used packaging and packaging waste to the recovery processes. A CEN Report relates
28、to the presence and concentration of dangerous substances and preparations including the four specified heavy metals, whilst five mandated standards address concepts of source reduction, reuse and recovery. Their application is capable of reducing the impact of packaging disposed of as waste but the
29、y are not necessarily simultaneously applicable to the same unit of packaging. These standardized procedures, which are listed in clause 5 of this standard, can be mutually exclusive in some combinations and circumstances and it is therefore essential that in developing a strategy for the applicatio
30、n of any one of these processes its relationship with the others be taken into account. For this reason, although dedicated standards have been developed for five of these concepts and a CEN Report prepared to assist the assessment of heavy metals, this sixth standard has been introduced to govern t
31、he relationship between these assessments. Its purpose is to establish the overall methodology for a set of measures that will enable those responsible for the placing of packaging or packed products on the European market to do so with a presumption of compliance with the essential requirements of
32、the Directive. It is recommended that the procedures and record keeping specified in this standard be applied as part of a formal quality management system such as those specified in the EN ISO 9000 series or an environmental management system such as EN ISO 14001. w w w . b z f x w . c o m EN 13427
33、:2004 (E) 5 1 Scope This document specifies requirements and a procedure by which a person or organization responsible for placing packaging or packed products on the market (the supplier) may combine the application of five (mandated) packaging standards and one (mandated) CEN Report (in two parts)
34、. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13428, Packaging Requ
35、irements specific to manufacturing and composition Prevention by source reduction. EN 13429, Packaging Reuse. EN 13430, Packaging Requirements for packaging recoverable by material recycling. EN 13431, Packaging Requirements for packaging recoverable in the form of energy recovery, including specifi
36、cation of minimum inferior calorific value. EN 13432, Packaging Requirements for packaging recoverable through composting and biodegradation Test scheme and evaluation criteria for the final acceptance of packaging. CR 13695-1:2000, Packaging Requirements for measuring and verifying the four heavy m
37、etals and other dangerous substances present in packaging, and their release into the environment Part 1 : Requirements for measuring and verifying the four heavy metals present in packaging. CR 13695-2, Packaging Requirements for measuring and verifying the four heavy metals and other dangerous sub
38、stances present in packaging, and their release into the environment Part 2 : Requirements for measuring and verifying dangerous substances present in packaging, and their release into the environment 3 Terms and definitions For the purposes of this document, the following terms and definitions appl
39、y. 3.1 supplier entity responsible for placing packaging or packed product on the market NOTE The term “supplier“ in normal usage can relate to various points in a supply chain. For the purpose of this standard it relates to any point in the supply chain where a transaction relating to packaging or
40、packed product takes place. 3.2 packaging component part of packaging that can be separated by hand or by using simple physical means w w w . b z f x w . c o m EN 13427:2004 (E) 6 4 Rationale and methodology 4.1 General approach The relationship between the essential requirements contained in the EC
41、 Packaging Directive and the standards or reports containing the criteria for assessment is shown in annex A, and particularly in Table A.1. The reference numbers in section 3 of Table A.1 refer to the numbers in Table 1 that show the relationship between the standards and reports. Each of the stand
42、ards and the report on heavy metals and other dangerous substances identified in Table 1 has been elaborated to enable the supplier to assess, through the use of a check list, conformance with the requirements relevant to its own particular procedure. Information annexes amplify the nature of the re
43、quirements and provide guidance on the methodology of assessment. The supplier is required to select, from these, the appropriate assessment procedures for any particular packaging taking account of design requirements such as the functional requirements of that packaging, including safety, hygiene
44、and consumer acceptance of the packed product. The selection will include identification of whether the packaging is intended to be reused and consideration of interactions with other standardized requirements. Consideration of such interaction may highlight the fact that optimization of the effect
45、of one procedure may require moderation in the application of others. A significant element of selecting and applying the separate standards will be to determine the most appropriate balance between them for any particular application. It is recommended that the supplier should apply these principle
46、s as an integral part of his/her formal management system, e.g. by incorporation of the procedures into an existing EN ISO 9001 or EN ISO 14001, in order to improve the environmental performance of the operation and to provide the opportunity for continuous improvement of the performance of the pack
47、aging placed on the market. Table 1 Relationship between the five (mandated) packaging standards, and one (mandated) CEN report 1 Manufacturing and composition 2 Reuse 3 Recovery 1.1 Prevention by source reduction (EN 13428) 2 Reuse (EN 13429) 3.1 Material recycling (EN 13430) 1.2 Requirements for m
48、easuring and verifying the four heavy metals present in packaging (CR 13695-1) 3.2 Energy recovery (EN 13431) 1.3 Requirements for measuring and verifying dangerous substances present in packaging (CR 13695-2) 3.3 Organic recovery (EN 13432) 4.2 Assessment of environmental impact of the four heavy m
49、etals and dangerous substances in packaging The assessment of environmental impact from the four heavy metals in packaging after incineration or landfilling is addressed in CR 13695-1. Particular attention should be paid to the concept of the component in the application of the recommendations of this report. Dangerous substances and preparations are defined in a number of European Directives. Their presence in emissions, ash and leachate from the waste management oper