《【BS英国标准】BS EN 13164-2008 Thermal insulation products for buildings — Factory made products of extruded polystyrene foam (XPS) — Specification.pdf》由会员分享，可在线阅读，更多相关《【BS英国标准】BS EN 13164-2008 Thermal insulation products for buildings — Factory made products of extruded polystyrene foam (XPS) — Specification.pdf（46页珍藏版）》请在三一文库上搜索。
1、BS EN 13164:2008 ICS 91.100.60 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BRITISH STANDARD Thermal insulation products for buildings Factory made products of extruded polystyrene foam (XPS) Specification This British Standard was published under the authority of the Stand
2、ards Policy and Strategy Committee on 30 June 2009. BSI 2009 ISBN 978 0 580 59853 1 Amendments/corrigenda issued since publication DateComments BS EN 13164:2008 National foreword This British Standard is the UK implementation of EN 13164:2008. It supersedes BS EN 13164:2001 which is withdrawn. The U
3、K participation in its preparation was entrusted to Technical Committee B/540, Energy performance of materials components and buildings. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary p
4、rovisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. BS EN 13164:2008 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13164 November 2008 ICS 91.100.60Supersedes EN 13164:2001 English Versio
5、n Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification Produits isolants thermiques pour le btiment - Produits manufacturs en mousse de polystyrne extrud (XPS) - Spcification Wrmedmmstoffe fr Gebude - Werkmig hergestellte Produkte aus e
6、xtrudiertem Polystyrolschaum (XPS) - Spezifikation This European Standard was approved by CEN on 12 October 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any a
7、lteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by
8、translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, G
9、ermany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORM
10、UNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2008 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13164:2008: E BS EN 13164:2008 EN 13164:2008 (E) 2 Contents Page Foreword 4 1 Scope 6 2 Normative references 6 3 Terms,
11、definitions, symbols, units, abbreviated terms .7 3.1 Terms and definitions .7 3.2 Symbols, units and abbreviated terms 8 4 Requirements 10 4.1 General . 10 4.2 For all applications . 10 4.3 For specific applications 14 5 Test methods . 17 5.1 Sampling 17 5.2 Conditioning 17 5.3 Testing . 17 6 Desig
12、nation code 19 7 Evaluation of Conformity . 19 8 Marking and labelling . 20 Annex A (normative) Determination of the declared values of thermal resistance and thermal conductivity . 21 A.1 General . 21 A.2 Input data . 21 A.3 Declared values. 21 Annex B (normative) Factory Production Control . 23 An
13、nex C (normative) Determination of the aged values of thermal resistance and thermal conductivity . 26 C.1 Scope . 26 C.2 Procedure for XPS foam without diffusion tight laminates 26 C.3 Procedure for XPS foam for use with diffusion tight facings on both sides 27 C.4 Calculation of aged value 28 C.5
14、Blowing agent . 29 C.6 Product grouping 29 Annex D (informative) Additional Properties . 30 D.1 General . 30 D.2 Behaviour under cyclic loading 30 D.3 Compressive modulus of elasticity 30 D.4 Bending strength 30 D.5 Shear strength . 30 D.6 Determination of volume percentage of closed cells . 31 Anne
15、x E (informative) Plan for cutting test specimen 32 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive. 34 ZA.1 Scope and relevant characteristics 34 ZA.2 Procedures for attestation of conformity of extruded polystyrene foam p
16、roducts . 36 ZA.3 CE Marking and labelling . 40 w w w . b z f x w . c o m BS EN 13164:2008 EN 13164:2008 (E) 3 Bibliography 42 Tables Table 1 Tolerances of length, width, squareness and flatness . 11 Table 2 Classes for thickness tolerances . 12 Table 3 Levels for compressive stress or compressive s
17、trength. 13 Table 4 Levels for deformation under specified compressive load and temperature conditions . 14 Table 5 Levels for tensile strength, perpendicular to faces 15 Table 6 Levels for long term water absorption by total immersion 16 Table 7 Levels for long term water absorption by diffusion .
18、16 Table 8 Levels for freeze thaw resistance . 16 Table 9 Test methods, test specimens and conditions . 18 Table A.1 Values of k for one sided 90 % tolerance interval with a confidence level of 90 % . 22 Table B.1 Minimum product testing frequencies 23 Table B.2 Minimum product testing frequencies f
19、or the reaction to fire characteristics 24 Table D.1 Test methods, test specimens, conditions and minimum testing frequencies . 31 Table ZA.1 Relevant clauses for Extruded polystyrene foam and intended use 35 Table ZA.2 Systems of attestation of conformity . 36 Table ZA.3 Assignment of evaluation of
20、 conformity tasks for products under system 1 . 37 Table ZA.4 Assignment of evaluation of conformity tasks for products under system 3 or system 3 combined with system 4 for reaction to fire 38 w w w . b z f x w . c o m BS EN 13164:2008 EN 13164:2008 (E) 4 Foreword This document (EN 13164:2008) has
21、been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2009, and c
22、onflicting national standards shall be withdrawn at the latest by May 2009. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directive(s). For relationship with EC Directive(s),
23、see informative Annex ZA, which is an integral part of this document. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document su
24、persedes EN 13164:2001. This document is one of a series of standards for insulating products used in buildings, but this standard may be used in other areas where appropriate. In pursuance of resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a package of
25、documents. The package of standards comprises the following group of interrelated standards for the specifications of factory made thermal insulation products; all of which come within the scope of CEN/TC88: EN 13162, Thermal insulation products for buildings Factory made mineral wool (MW) products
26、Specification EN 13163, Thermal insulation products for buildings Factory made products of expanded polystyrene (EPS) Specification EN 13164, Thermal insulation products for buildings Factory made products of extruded polystyrene foam (XPS) Specification EN 13165, Thermal insulation products for bui
27、ldings Factory made rigid polyurethane foam (PUR) products Specification EN 13166, Thermal insulation products for buildings Factory made products of phenolic foam (PF) Specification EN 13167, Thermal insulation products for buildings Factory made cellular glass (CG) products Specification EN 13168,
28、 Thermal insulation products for buildings Factory made wood wool (WW) products Specification EN 13169, Thermal insulation products for buildings Factory made products of expanded perlite (EPB) Specification EN 13170, Thermal insulation products for buildings Factory made products of expanded cork (
29、ICB) Specification w w w . b z f x w . c o m BS EN 13164:2008 EN 13164:2008 (E) 5 EN 13171, Thermal insulation products for buildings Factory made wood fibre (WF) products Specification According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries
30、 are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, S
31、weden, Switzerland and the United Kingdom. w w w . b z f x w . c o m BS EN 13164:2008 EN 13164:2008 (E) 6 1 Scope This European Standard specifies the requirements for factory made products of extruded polystyrene foam, with or without facings or coatings, which are used for thermal insulation of bu
32、ildings. The products are manufactured in the form of boards, which are also available with special edge and surface treatment (tongue and grooves, shiplap, etc.). This European Standard specifies product characteristics and includes procedures for testing, evaluation of conformity, marking and labe
33、lling. Products covered by this European Standard are also used in prefabricated thermal insulating systems and composite panels; the performance of systems incorporating these products is not covered. This European Standard also covers multilayered insulation boards. This European Standard does not
34、 specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to be found in regulations or non-conflicting standards. Products with a declared thermal resistance lower than
35、0,25 m2K/W or a declared thermal conductivity greater than 0,060 W/(mK) at 10 C are not covered by this European Standard. This European Standard does not cover in situ insulation products and products intended to be used for the insulation of building equipment and industrial installations or produ
36、cts intended for acoustic insulation. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendment
37、s) applies. EN 822, Thermal insulating products for building applications Determination of length and width EN 823, Thermal insulating products for building applications Determination of thickness EN 824, Thermal insulating products for building applications Determination of squareness EN 825, Therm
38、al insulating products for building applications Determination of flatness EN 826, Thermal insulating products for building applications Determination of compression behaviour EN 1604, Thermal insulating products for building applications Determination of dimensional stability under specified temper
39、ature and humidity conditions EN 1605, Thermal insulating products for building applications Determination of deformation under specified compressive load and temperature conditions EN 1606, Thermal insulating products for building applications Determination of compressive creep EN 1607, Thermal ins
40、ulating products for building applications Determination of tensile strength perpendicular to faces EN 12086:1997, Thermal insulating products for building applications Determination of water vapour transmission properties EN 12087, Thermal insulating products for building applications Determination
41、 of long term water absorption by immersion w w w . b z f x w . c o m BS EN 13164:2008 EN 13164:2008 (E) 7 EN 12088, Thermal insulating products for building applications Determination of long term water absorption by diffusion EN 12089, Thermal insulating products for building applications Determin
42、ation of bending behaviour EN 12090, Thermal insulating products for building applications Determination of shear behaviour EN 12091, Thermal insulating products for building applications Determination of freeze-thaw resistance EN 12667, Thermal performance of building materials and products Determi
43、nation of thermal resistance by means of guarded hot plate and heat flow meter methods Products of high and medium thermal resistance EN 12939, Thermal performance of building materials and products Determination of thermal resistance by means of guarded hot plate and heat flow meter methods Thick p
44、roducts of high and medium thermal resistance EN 13172:2008, Thermal insulating products Evaluation of conformity EN 13501-1, Fire classification of construction products and building elements Part 1: Classification using data from reaction to fire test EN 13793, Thermal insulating products for buil
45、ding applications - Determination of behaviour under cyclic loading EN 13820, Thermal insulating materials for building applications Determination of organic content EN 13823, Reaction to fire tests for building products Building products excluding floorings exposed to the thermal attack by a single
46、 burning item EN ISO 1182, Reaction to fire tests for building products Non-combustibility test (ISO 1182:2002) EN ISO 1716, Reaction to fire tests for building products Determination of the heat of combustion (ISO 1716:2002) EN ISO 4590, Rigid cellular plastics - Determination of the volume percent
47、age of open cells and closed cells (ISO 4590:2002) EN ISO 9229:2007, Thermal insulation Vocabulary (ISO 9229:2007) EN ISO 11925-2, Reaction to fire tests Ignitability of building products subjected to direct impingement of flame Part 2:Single-flame source test (ISO 11925-2:2002) ISO 12491, Statistic
48、al methods for quality control of building materials and components 3 Terms, definitions, symbols, units, abbreviated terms 3.1 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1.1 Terms and definitions as given in EN ISO 9229:2007 3.1.1.1 extrude
49、d polystyrene foam rigid cellular plastics insulation material expanded and extruded with or without a skin, from polystyrene or one of its copolymers and which has a closed cell structure w w w . b z f x w . c o m BS EN 13164:2008 EN 13164:2008 (E) 8 3.1.1.2 board rigid or semi-rigid insulation product of rectangular shape and cross section in which the thickness is uniform and substantially smaller than the other dimensions