《07-30160570-DC.pdf》由会员分享，可在线阅读，更多相关《07-30160570-DC.pdf（22页珍藏版）》请在三一文库上搜索。
1、a Date: 2 January 2007 Origin: International Latest date for receipt of comments: 30 April 2007 Project no.: 2007/00006 Responsible committee: EPL/46/2 Radio frequency connectors and waveguides Interested committees: Title: Draft BS EN 61169-24 Radio-frequency connectors Part 24: Sectional specifica
2、tion - Radio frequency coaxial connectors wi th screw coupling, typically for use in 75 ohm cable distribution systems (type F) Supersession information: If this document is published as a standard, the UK implementation of it will supersede BSEN61169-24 : 2002 and partially supersede NONE . If you
3、are aware of a current national standard which may be affected, please notify the secretary (contact details below). WARNING: THIS IS A DRAFT AND MUST NOT BE REGARDED OR USED AS A BRITISH STANDARD. THIS DRAFT IS NOT CURRENT BEYOND 30 April 2007. This draft is issued to allow comments from interested
4、 parties; all comments will be given consideration prior to publication. No acknowledgement will normally be sent. See overleaf for information on commenting. No copying is allowed, in any form, without prior written permission from BSI except as permitted under the Copyright, Designs and Patent Act
5、 1988 or for circulation within a nominating organization for briefing purposes. Electronic circulation is limited to dissemination by e-mail within such an organization by committee members. Further copies of this draft may be purchased from BSI Customer Services, Tel: +44(0) 20 8996 9001 or email
6、ordersbsi-. British, International and foreign standards are also available from BSI Customer Services. British Standards on CD or Online are available from British Standards Publishing Sales Limited. Tel: 01344 404409 or email bsonlinetechindex.co.uk. Information on the co-operating organizations r
7、epresented on the committees referenced above may be obtained from the responsible committee secretary. Cross-references The British Standards which implement International or European publications referred to in this draft may be found via the British Standards Online Service on the BSI web site ht
8、tp:/www.bsi-. Direct tel: 0208 996 7281 Responsible Committee Secretary: Mr S Bounds (BSI) E-mail: simon.boundsbsi- Draft for Public Comment Head Office 389 Chiswick High Road London W4 4AL Telephone: +44(0)20 8996 9000 Fax: +44(0)20 8996 7001 Form 36 Version 6.1 DPC: 07/30160570 DC Licensed Copy: L
9、ondon South Bank University, London South Bank University, Thu Jan 18 01:09:28 GMT+00:00 2007, Uncontrolled Copy, (c) BSI b Introduction This draft standard is based on international discussions in which the UK has taken an active part. Your comments on this draft are welcome and will assist in the
10、preparation of the consequent standard. If no comments are received to the contrary, then the UK will approve this draft. There is a high probability that this text could be adopted by CENELEC as a reference document for harmonization or as a European Standard. Recipients of this draft are requested
11、 to comment on the text bearing in mind this possibility. UK Vote Please indicate whether you consider the UK should submit a negative (with reasons) or positive vote on this draft. Submission The guidance given below is intended to ensure that all comments receive efficient and appropriate attentio
12、n by the responsible BSI committee. Annotated drafts are not acceptable and will be rejected. All comments must be submitted, preferably electronically, to the Responsible Committee Secretary at the address given on the front cover. Comments should be compatible with Version 6.0 or Version 97 of Mic
13、rosoft Word for Windows, if possible; otherwise comments in ASCII text format are acceptable. Any comments not submitted electronically should still adhere to these format requirements. All comments submitted should be presented as given in the example below. Further information on submitting commen
14、ts and how to obtain a blank electronic version of a comment form are available from the BSI web site at:http:/www.bsi- Template for comments and secretariat observations Date: xx/xx/200x Document: ISO/DIS xxxxx 1 2 (3) 4 5 (6) (7) MB Clause No./ Subclause No./ Annex (e.g. 3.1) Paragraph/ Figure/Tab
15、le/ Note (e.g. Table 1) Type of com- ment Comment (justification for change) by the MB Proposed change by the MB Secretariat observations on each comment submitted 3.1 Definition 1 ed Definition is ambiguous and needs clarifying. Amend to read . so that the mains connector to which no connection . 6
16、.4 Paragraph 2 te The use of the UV photometer as an alternative cannot be supported as serious problems have been encountered in its use in the UK. Delete reference to UV photometer. Microsoft and MS-DOS are registered trademarks, and Windows is a trademark of Microsoft Corporation. Licensed Copy:
17、London South Bank University, London South Bank University, Thu Jan 18 01:09:28 GMT+00:00 2007, Uncontrolled Copy, (c) BSI 46F/63/CD COMMITTEE DRAFT (CD) IEC/TC or SC: SC46F Project number IEC 61169-24 Ed 2.0 Title of TC/SC: RF and microwave passive components Date of circulation 2006-12-22 Closing
18、date for comments 2007-03-23 Also of interest to the following committees TC46 Supersedes document 46F/31/DC 46F/51/INF Functions concerned: Safety EMC Environment Quality assurance Secretary: France THIS DOCUMENT IS STILL UNDER STUDY AND SUBJECT TO CHANGE. IT SHOULD NOT BE USED FOR REFERENCE PURPOS
19、ES. RECIPIENTS OF THIS DOCUMENT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION. Title: IEC 61169-24: Radio-frequency connectors Part 24: Sectional specification Radio frequency coaxial connectors
20、with screw coupling, typically for use in 75 ohm cable distribution systems (type F) (Titre) : Introductory note Copyright 2006 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this electronic file, to make a copy and to print out the content for the s
21、ole purpose of preparing National Committee positions. You may not copy or “mirror“ the file or printed version of the document, or any part of it, for any other purpose without permission in writing from IEC. Licensed Copy: London South Bank University, London South Bank University, Thu Jan 18 01:0
22、9:28 GMT+00:00 2007, Uncontrolled Copy, (c) BSI IEC 61169-24/Ed.2 2 46F/63/CD CONTENTS 1 Scope.5 2 Normative references .5 3 Interface Dimensions5 3.1 Dimensions .5 3.1.1 Connector “F” Type female Socket (Outdoor and indoor) Physical Dimensions 6 3.1.2 Connector “F” Type Male plug (Outdoor and indoo
23、r) Physical Dimensions .6 3.2 Mechanical gauges9 3.2.1 Mating Socket Centre Conductor Acceptance Diameter Test .9 3.2.2 Mating Port Centre Conductor Acceptance Electrical Test .10 3.2.3 Reference Plane Electrical Contact10 4 Quality assessment procedures10 4.1 General .10 4.2 Ratings and characteris
24、tics .10 4.2.1 Electrical Characteristics .10 4.2.2 Environmental characteristics Outdoor10 4.3 Test Schedule and Inspection requirements 12 4.3.1 Acceptance tests .12 4.3.2 Periodic tests.12 4.4 Procedures13 4.4.1 Quality conformance inspection .13 4.4.2 Qualification approval and its maintenance13
25、 5 Instructions for preparation of detail specifications .14 5.1 General .14 5.2 Identification of the Detail specification14 5.3 Identification of the component14 5.4 Performance15 5.5 Marking, ordering information and related matters.15 5.6 Selection of tests, test conditions and severities15 5.7
26、Blank detail specification pro-forma for type F connector.16 Licensed Copy: London South Bank University, London South Bank University, Thu Jan 18 01:09:28 GMT+00:00 2007, Uncontrolled Copy, (c) BSI IEC 61169-24/Ed.2 3 46F/63/CD INTERNATIONAL ELECTROTECHNICAL COMMISSION _ RADIO-FREQUENCY CONNECTORS
27、Part 24: Sectional specification Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (type F) FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotech
28、nical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications
29、, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, go
30、vernmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decision
31、s or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for internati
32、onal use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order
33、to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearl
34、y indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall
35、attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal
36、fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this public
37、ation. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61169-24 has been prepared by subcommittee 46F: RF and mi
38、crowave passive components, of IEC technical committee 46: Cables, wires, waveguides, RF connectors and accessories for communication and signalling. This second edition differs from the first edition in that all drawings have been reworked and improved to allow frequency extension up to 3 GHz. The
39、text of this standard is based on the following documents: FDIS Report on voting XX/XX/FDIS XX/XX/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC D
40、irectives, Part 2. Licensed Copy: London South Bank University, London South Bank University, Thu Jan 18 01:09:28 GMT+00:00 2007, Uncontrolled Copy, (c) BSI IEC 61169-24/Ed.2 4 46F/63/CD The committee has decided that the contents of this publication will remain unchanged until the maintenance resul
41、t date1) indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 1) The National Committees are requested to note that for this publication th
42、e maintenance result date is Licensed Copy: London South Bank University, London South Bank University, Thu Jan 18 01:09:28 GMT+00:00 2007, Uncontrolled Copy, (c) BSI IEC 61169-24/Ed.2 5 46F/63/CD RADIO-FREQUENCY CONNECTORS Part 24: Sectional specification Radio frequency coaxial connectors with scr
43、ew coupling, typically for use in 75 ohm cable distribution systems (type F) 1 Scope This part of IEC 61169, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for RF coaxial connectors with screw coupling, typically for use in 7
44、5 ohm cable distribution systems (type F). It describes the interface dimensions for general purpose grade 2 connectors, dimensional details for standard test connectors, grade 0, together with gauging information and the mandatory tests selected from IEC 61169-1, applicable to all DS relating to ty
45、pe F connectors. This specification indicates the recommended performance characteristics to be considered when writing a DS and covers test schedules and inspection requirements. 2 Normative references The following referenced documents are indispensable for the application of this document. For da
46、ted references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61169-1, Radio-frequency connectors Part 1: Generic specification General requirements and measuring methods 3 Interface Dimensions 3.1 Dimens
47、ions Millimetres are original dimensions. All undimensioned pictorial configurations are for reference purposes only. Licensed Copy: London South Bank University, London South Bank University, Thu Jan 18 01:09:28 GMT+00:00 2007, Uncontrolled Copy, (c) BSI IEC 61169-24/Ed.2 6 46F/63/CD 3.1.1 Connecto
48、r “F” Type female Socket (Outdoor and indoor) Physical Dimensions Fig 1. Connector “F” Type female Socket (Outdoor and indoor) Connector “F” Type female Socket (Outdoor and indoor) DESCRIPTION DIM mm inches NOTES MIN MAX MIN MAX REF. PLANE OPENING INNER DIAMETER A 3.90 7.4 0.154 0.291 3 REF. PLANE O
49、UTER DIAMETER B 7.50 8.50 0.295 0.335 POSITIVE CONTACT POINT DEPTH C - 4.70 - 0.185 6 PORT MINIMUM THREAD LENGTH D 7.50 - 0.295 - 5 MINIMUM CENTER CONTACT DEPTH E 9.00 - 0.354 - 7 CENTER CONDUCTOR GUIDE INNER DIAMETER F 1.2 1.5 0.047 0.059 PORT LENGTH G - 13.07- 0.515 4 SEALING SURFACE DIAMETER FOR SEAL RING H 9.35 9.65 0.368 0.380 NOTES: 1 DRAWING NOT TO SCALE. 2 INTERPRET DRAWING IN ACCORDANCE WITH ASME Y14.