《A-A-59326-5A-2003.pdf》由会员分享,可在线阅读,更多相关《A-A-59326-5A-2003.pdf(3页珍藏版)》请在三一文库上搜索。
1、INCH-POUND A-A-59326/5A May 1, 2003 SUPERSEDING A-A-59326/5 September 25, 1998 COMMERCIAL ITEM DESCRIPTION SPECIFICATION SHEET COUPLING HALF, FEMALE BY INTERNAL PIPE THREAD, TYPE V The General Services Administration has authorized the use of this commercial item description specification sheet, for
2、 all federal agencies. The complete requirements for procuring couplings described herein shall consist of this document and the latest issue in effect of A-A-59326A. CAM-LOCK INTERFACE (SEE A-A-59326A) GASKET (SEE A-A-59326A) THREADED INTERFACE (SEE TABLE) PULL RING (SEE A-A-59326A) FIGURE 1. Coupl
3、ing half. Beneficial comments, recommendations, additions, deletions, clarifications, etc., and any other data which may improve this document should be sent by letter to: US Army Tank-automotive and Armaments Command, ATTN: AMSTA-TR-D/210, 6501 E. 11 Mile Road, Warren, MI 48397-5000. AMSC N/A FSC 4
4、730 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. A-A-59326/5A 2 1. SCOPE. This specification covers a female by internal pipe thread, type V coupling half. 2. CLASSIFICATION. The size of the coupling halves is designated in table 1. TABLE 1. Coupling half size. D
5、ash No Cam-Lock Nom. Size Thread FNPT Gasket Reqd 1 -14 -1 2 -14 -2 3 1 1-11 -3 4 1 1 -11 -4 5 1 1 -11 -5 6 2 2-11 -6 7 2 2 -8 -7 8 3 3-8 -8 9 4 4-8 -9 10 6 6-8 -10 Sizes are in inches 3. SALIENT CHARACTERISTICS. The following characteristics differ from those listed in A-A-59326A. 3.1 Accessories.
6、The coupling shall be supplied with pull rings and gasket indicated. 3.2 Threads. The coupling threads shall conform to National Tapered Pipe Thread per ANSI/ASME B1.20.1. 3.3 Hydrostatic test pressure. The -inch through 6-inch couplings shall withstand a hydrostatic test pressure of 300 pounds per
7、square inch gage (psig). The 6-inch, 75 psi rated couplings shall withstand a hydrostatic test pressure of 150 psig. 3.4 Working pressure. The -inch through 4-inch couplings shall be rated for 150 pounds per square inch working pressure. The 6-inch couplings shall be rated for 75 psi or 150 psi work
8、ing pressure as appropriate. 4. NOTES. 4.1 Part Identification Number (PIN). The following PIN procedure is for government purposes and does not constitute a requirement for the contractor. This example describes a part numbering system for specification sheet A-A-59326/5A. AA59326/5A-6-A-1; /5A ind
9、icates a Female by Internal Pipe Thread Type V Coupling Half; -6 indicates a 2 inch nominal size; A indicates Aluminum; and -1 indicates a style 1 coupling. A-A-59326/5A 3 Material: A - Aluminum B - Copper Alloy (Brass or Bronze) BA - Aluminum Bronze SS - Stainless Steel Style 1 - Style 1 couplings
10、do not require the incorporation of a positive locking mechanism to lock the cam arms in the closed position but the cam arms will stay in the closed position when the coupling halves are assembled. Style 2 - Style 2 couplings will incorporate a positive locking mechanism to lock the cam arms in the
11、 closed position when the coupling halves are assembled. The locking mechanism will be manually released (the release doesnt have to stay in the released position) before the cam arms can be moved to the open position. 4.2 International standardization. Certain provisions of this specification (dime
12、nsions) are the subject of international standardization agreement (see A-A-59326A). MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: GSA-FSS Custodians: Preparing Activity: Army - AT Army - AT Navy - YD Air Force - 99 (Project 4730-2029-005) Review Activities: Army - AV, GL Navy - MC, SH Air Force - 71 DLA - CC