《AGMA-9009-D02-2002.pdf》由会员分享，可在线阅读，更多相关《AGMA-9009-D02-2002.pdf（24页珍藏版）》请在三一文库上搜索。
1、ANSI/AGMA9009-D02 ANSI/AGMA 9009-D02 (Revision of AGMA 510.03) AMERICAN NATIONAL STANDARD Flexible Couplings - Nomenclature for Flexible Couplings Copyright American Gear Manufacturers Association Provided by IHS under license with AGMA Licensee=IHS Employees/1111111001, User=Wing, Bernie Not for Re
2、sale, 04/18/2007 10:46:14 MDTNo reproduction or networking permitted without license from IHS -,-,- ii Flexible Couplings - Nomenclature for Flexible Couplings ANSI/AGMA 9009-D02 (Revision of AGMA 510.03) Approval of an American National Standard requires verification by ANSI that the require- ments
3、 for due process, consensus and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantialagreementmeans
4、muchmore thana simplemajority, butnot necessarily una- nimity.Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution. The use of American National Standards is completely voluntary; their existence does not in any respect preclude
5、anyone, whether he has approved the standards or not, from manufacturing, marketing, purchasing or using products, processes or procedures not conforming to the standards. The American National Standards Institute does not develop standards and will in no circumstances give an interpretation of any
6、American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National StandardinthenameoftheAmericanNationalStandardsInstitute. Requests forinterpre- tation of this standard should be addressed to the American Gear Manufacturers Associat
7、ion. CAUTION NOTICE: AGMA technical publications are subject to constant improvement, revision or withdrawal as dictated by experience. Any person who refers to any AGMA Technical Publication should be sure that the publication is the latest available from the Association on the subject matter. Tabl
8、es or other self-supporting sections may be quoted or extracted. Credit lines should read: Extracted from ANSI/AGMA 9009-D02, Flexible Couplings - Nomenclature for FlexibleCouplings,withthepermissionofthepublisher,theAmericanGear Manufacturers Association, 1500 King Street, Suite 201, Alexandria, Vi
9、rginia 22314. Approved June 27, 2002 ABSTRACT This standardpresents thenomenclaturecommontoflexiblecouplings as usedinmechanical powertransmis- sion drives. It does not address nomenclature for flexible shafts, quill shafts, universal joints or devices which exhibit slip such as clutches, fluid coup
10、lings, magnetic couplings or torque converters. The standard was pre- paredtoreducethelanguagebarriersthatarisebetweendesigners,manufacturersandusers whenattempting to designate or describe various types of flexible couplings and their elements. Published by American Gear Manufacturers Association 1
11、500 King Street, Suite 201, Alexandria, Virginia 22314 Copyright 2002 by American Gear Manufacturers Association All rights reserved. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without prior written permission of the publisher. Printed
12、in the United States of America ISBN: 1-55589-796-7 American National Standard Copyright American Gear Manufacturers Association Provided by IHS under license with AGMA Licensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 04/18/2007 10:46:14 MDTNo reproduction or networking permitted
13、 without license from IHS -,-,- ANSI/AGMA 9009- -D02AMERICAN NATIONAL STANDARD iii Contents Page Forewordiv. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Scope1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Normative references1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Symbols1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15、 . . . . . . 4Coupling definitions2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Bores in hubs5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Keys, keyways and keyseats6. . . . .
16、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Shaft relationships6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Coupling physical properties and other characteristics6. . . . . . . . . . . . . . . . . . . . . 9Term
17、s used in coupling selection8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 System terms12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 General terms13. . . . . . . . . . . . . . . . . . . . . . . .
18、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Index15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figures 1Shaft relationships7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19、. . . . . . . . . . . . . . 2Torsional stiffness7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Damping coefficient8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Example of pulsating torq
20、ue9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Example of reversing torque10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Static unbalance11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
21、. . . . . . . . . . . . . 7Couple unbalance11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Dynamic unbalance12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tables 1Symbols1. . . . . . . . . .
22、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Copyright American Gear Manufacturers Association Provided by IHS under license with AGMA Licensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 04/18/2007 10:46:14 MDTNo reproduction o
23、r networking permitted without license from IHS -,-,- ANSI/AGMA 9009- -D02AMERICAN NATIONAL STANDARD iv Foreword The foreword, footnotes and annexes, if any, in this document are provided for informational purposes only and are not to be construed as a part of ANSI/AGMA Standard 9009-D02, Flexible C
24、ouplings - Nomenclature for Flexible Couplings. This Standard was prepared to reduce the language barriers that arise between designers, manufacturers,anduserswhenattemptingtodesignateordescribevarioustypesofflexible couplings and their elements. The first draft copy of AGMA 510.01 was prepared by t
25、he Flexible Coupling Nomenclature Committee in October, 1963. It was accepted as an AGMA Standard on July 9, 1965. AGMA 510.01 was editorially changed and approved as AGMA 510.02 in August 1969. AGMA 510.03 was approved in October, 1983.The revised standard contained an improved clarity in definitio
26、ns, simplification of nomenclature, addition of coupling physical property terms and units including SI Units, and introduction of an axial travel term for couplings. ANSI/AGMA 9009-D02 is a revision of AGMA 510.03, and was approved by the AGMA membership in May 2001. It was approved as an American
27、National Standard on June 27, 2002. This revision includes additional nomenclature from standards developed since the previous revision. Suggestions for improvement of this standard will be welcome. They should be sent to the American Gear Manufacturers Association, 1500 King Street, Suite 201, Alex
28、andria, Virginia 22314. Copyright American Gear Manufacturers Association Provided by IHS under license with AGMA Licensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 04/18/2007 10:46:14 MDTNo reproduction or networking permitted without license from IHS -,-,- ANSI/AGMA 9009- -D02AME
29、RICAN NATIONAL STANDARD v PERSONNEL of the AGMA Flexible Couplings Committee Chairman: Glenn PokrandtThe Falk Corporation. . . . . . . . . . . . . . . . . . . . . . Vice Chairman: James PaluhBoston Gear/Ameridrives Gear Coupling Ops . . . . . . . . . . . . . . . . . . . ACTIVE MEMBERS D.A. BoccioBos
30、ton Gear/Ameridrives Gear Coupling Ops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . T. CainLucas Aerospace. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D.E. CryslerT.B. Woods, Inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
31、 . . . D.B. CutlerRexnord Coupling Division. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P.J. DixonMetal Improvement Company. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A. HasebrockFlender Corporation. . . . . . . . . . . . . . . . . . . . . . .
32、 . . . . . . . . . . . T. HewittRexnord Coupling Division. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D. HindmanRexnord Elastomer Products Division. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . J.W. MahanLovejoy, Inc . . . . . . . . . . . . . .
33、 . . . . . . . . . . . . . . . . . . . . . J.R. MancusoKop-Flex, Inc./Emerson Power Transmission Corp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S.L. PearsonMobil Oil Corporation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R.S. PostRexnord Coupling Div
34、ision. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . J. SherredRenold, Inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R.G. ThompsonT.B. Woods, Inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R. WhitneyRiverhawk Company. . . .
35、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ASSOCIATE MEMBERS D. DrechslerHuffman Corporation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . K.H. HoelmerXtek, Incorporated. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V. IversXtek, Inco
36、rporated. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D. LindsayEmerson Gearing/Morse, Browning, USEM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L. LloydLufkin Industries, Inc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
37、. . . . . . . R.E. MunyonKop-Flex, Inc./Emerson Power Transmission Corp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M.A. ONeillRiverhawk Company. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D. ReynoldsRockwell Automation/Dodge. . . . . . . . . . . .
38、. . . . . . . . . . . . . . . . . . . . . . . E.I. RivinWayne State University. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . T. Van CleaveXtek, Incorporated. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . W. WelschMetal Improvement Company. . . . . . .
39、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Copyright American Gear Manufacturers Association Provided by IHS under license with AGMA Licensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 04/18/2007 10:46:14 MDTNo reproduction or networking permitted without license f
40、rom IHS -,-,- ANSI/AGMA 9009- -D02AMERICAN NATIONAL STANDARD vi (This page is intentionally left blank.) Copyright American Gear Manufacturers Association Provided by IHS under license with AGMA Licensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 04/18/2007 10:46:14 MDTNo reproducti
41、on or networking permitted without license from IHS -,-,- 1 ANSI/AGMA 9009- -D02AMERICAN NATIONAL STANDARD American National Standard - Flexible Couplings - Nomenclature for Flexible Couplings 1 Scope 1.1 Applicability This standard provides nomenclature common to flexible couplings and their applic
42、ation as used in mechanical power transmission drives. 1.2 Exceptions The following coupling types are not included in this standard: -flexible shaft; -quill shaft; -universal joint; -devices which exhibit slip such as clutches, fluid couplings, magnetic couplings and torque converters. 2 Normative
43、references The following documents contain provisions which, throughreferenceinthistext,constituteprovisionsof the standard. At the time of publication, the editions were valid. All publications are subject to revision, and the users of this manual are encouraged to investigatethepossibilityofapplyi
44、ngthemostrecent editions of the publications listed. ANSI/AGMA 9000-C90, Flexible Couplings - Potential Unbalance Classification ANSI/AGMA 9002-A86, Bores and Keyways for Flexible Couplings (Inch Series) ANSI/AGMA9004-A99,Flexible Couplings - MassElasticPropertiesandOther Characteristics 3 Symbols T
45、he symbols used in this standard are shown in table 1. NOTE:The symbols and terms contained in this document may vary from those used in other AGMA standards. Usersofthisstandardshouldassurethem- selves that they are using these symbols and terms in the manner indicated herein. Table 1 - - Symbols S
46、ymbolDefinition Units SI (inch) Where first used ADDamping energy during one cycleN-mlb-inEq 2 AEElastic deformation energyN-mlb-inEq 2 dTRate of change in torqueNmlb-inEq 1 dRate of change in torsional deflectionradiansradiansEq 1 FForceNlbEq 3 JPolar mass moment of inertiaN-m-s2lb-in-s28.4 kTorsio
47、nal stiffnessNm/radianlb-in/radian8.5 MMasskgslug8.1 RaArithmetic average of surface finishmmmin11.5.1 RqRoot-mean-square of surface finishmmmm11.5.2 rDistanceminEq 3 TTorqueNmlb-inEq 3 (continued) Copyright American Gear Manufacturers Association Provided by IHS under license with AGMA Licensee=IHS
48、 Employees/1111111001, User=Wing, Bernie Not for Resale, 04/18/2007 10:46:14 MDTNo reproduction or networking permitted without license from IHS -,-,- ANSI/AGMA 9009- -D02AMERICAN NATIONAL STANDARD 2 Table 1 (concluded) SymbolDefinitionUnits Where first used WWeightkglbf8.2 WR2Coupling flywheel effect, also known as polar weight moment of inertia kg-m2lb-in28.3 Damping coefficient- - -8.7.2 4 Coupling definitions 4.1 Rigid coupling A mechanical shaft connector designed to transmit torquewithoutslipandwilltransmitaxial/thrustforce. T