《BS-3182-4-1978 ISO-367-1976.pdf》由会员分享,可在线阅读,更多相关《BS-3182-4-1978 ISO-367-1976.pdf(8页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS 3182-4: 1978 ISO 367:1976 Textile machinery and accessories: healds, heald frames and reeds Part 4: Specification for metal reeds with plate baulk: dimensions ISO title: Textile machinery and accessories Metal reeds with plate baulk Dimensions UDC 677.054.845.2 Licensed Copy: she
2、ffieldun sheffieldun, na, Wed Nov 29 07:01:53 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 3182-4:1978 This British Standard, having been prepared under the direction of the Textile Machinery Standards Committee, was published under the authority of the Executive Board on 31 January 1978 BSI 12-199
3、9 First published as BS 3182 December 1959 First revision September 1969 Second revision as BS 3182-4 January 1978 The following BSI references relate to the work on this standard: Committee reference TMT/69 Letter of intent 77/35487 ISBN 0 580 09769 2 Cooperating organizations The Textile Machinery
4、 Standards Committee, under whose direction this British Standard was prepared, consists of representatives from the following Government department and scientific and industrial organizations: British Textile Employers Association British Textile Machinery Association* Health Part 2: implementing I
5、SO 365:1976 “Textile machinery and accessories Twin wire healds for Jacquard weaving Dimensions”; Part 3: implementing ISO 568:1976 “Textile machinery and accessories Heald frames for single or double row of healds Designation of dimensions”; Part 5: implementing ISO 571:1976 “Textile machinery and
6、accessories Metal reeds with double-spring baulk Dimensions”. Additional Parts may be added following the publication of further suitable International Standards. Terminology and conventions. The text of the International Standard has been accepted as suitable for publication, without deviation, as
7、a British Standard. Certain terminology and conventions are used, however, that are not identical with those used in British Standards. Attention is therefore drawn to the following. Where the words “International Standard”, relating to this publication, appear, they should be interpreted as “Britis
8、h Standard”. The comma has been used as a decimal marker. In British Standards it is current practice to use a full point (a full stop on the baseline) as the decimal marker. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are res
9、ponsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 and 2 and a back cover. This standard has been updated (see cop
10、yright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 29 07:01:53 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 3182-4:1978 BSI 12-19991 1 Scope and field of application This
11、 International Standard specifies the dimensions of metal reeds with plate baulk for use in the textile industry. Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 29 07:01:53 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 3182-4:1978 2 BSI 12-1999 2 Dimensions Licensed Copy: sheffieldun sheffieldu
12、n, na, Wed Nov 29 07:01:53 GMT+00:00 2006, Uncontrolled Copy, (c) BSI blank Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 29 07:01:53 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 3182-4: 1978 ISO 367:1976 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the in
13、dependent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that
14、they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, th
15、e identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international
16、and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested
17、. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. C
18、ontact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020
19、8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in
20、 a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade de
21、signations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070. Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 29 07:01:53 GMT+00:00 2006, Uncontrolled Copy, (c) BSI