《BS-EN-12171-2002.pdf》由会员分享，可在线阅读，更多相关《BS-EN-12171-2002.pdf（12页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 12171:2002 Heating systems in buildings Procedure for the preparation of documents for operation, maintenance and use Heating systems not requiring a trained operator The European Standard EN 12171:2002 has the status of a British Standard ICS 91.140.10 ? Licensed Copy: sheffi
2、eldun sheffieldun, na, Sat Oct 28 11:40:53 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 12171:2002 This British Standard, having been prepared under the direction of the Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Commi
3、ttee on 20 September 2002 BSI 20 September 2002 ISBN 0 580 40445 5 National foreword This British Standard is the official English language version of EN 12171:2002. The UK participation in its preparation was entrusted to Technical Committee RHE/24, Central heating installations, which has the resp
4、onsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “I
5、nternational Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with
6、a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related internatio
7、nal and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 8, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last i
8、ssued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 11:40:53 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12171 May 2002 ICS 91.140.10 English version Heating systems in buildings -
9、 Procedure for the preparation of documents for operation, maintenance and use - Heating systems not requiring a trained operator Systmes de chauffage dans les btiments - Instructions de conduite, maintenance et utilisation - Systmes de chauffage ne requrant pas pour leur conduite lintervention dun
10、professionnel Heizungsanlagen in Gebuden - Betriebs-, Wartungs- und Bedienungsanleitungen - Heizungsanlagen, die kein qualifiziertes Bedienungspersonal erfordern This European Standard was approved by CEN on 11 April 2002. CEN members are bound to comply with the CEN/CENELEC Internal Regulations whi
11、ch stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Stand
12、ard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standar
13、ds bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITE
14、E FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2002 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12171:2002 E Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 11:40:53 GMT+00:00 2006, Uncontrolled Copy,
15、 (c) BSI EN 12171:2002 (E) 2 Contents page Foreword.3 Introduction .4 1Scope4 2Terms, definitions and abbreviations 5 3General requirements for the OM ? installation of heating systems; ? commissioning of heating systems; ? instructions for operation, maintenance and use of heating systems; ? method
16、s for calculation of the design heat loss and heat loads; ? methods for calculation of the energy performance of heating systems. Heating systems also include the effect of attached systems such as hot water production systems. All these standards are system standards, i.e. they are based on require
17、ments addressed to the system as a whole and not dealing with requirements to the products within the system. Where possible, reference is made to other CEN or ISO standards, a.o. product standards. However, use of products complying with relevant product standards is no guarantee of compliance with
18、 the system requirements. The requirements are mainly expressed as functional requirements, i.e. requirements dealing with the function of the system and not specifying shape, material, dimensions or the like. The guidelines describe ways to meet the requirements, but other ways to fulfil the functi
19、onal requirements might be used if fulfilment can be proved. Heating systems differ among the member countries due to climate, traditions and national regulations. In some cases requirements are given as classes so national or individual needs may be accommodated. In cases where the standards contra
20、dict with national regulations, the latter should be followed. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece
21、, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 11:40:53 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 12171:2002 (E) 4 Introduction This standard is intended to be
22、used in the preparation of documents for operation, maintenance and use of heating systems for new projects and renovation projects as well as in the updating of existing such documents. Documents for operation, maintenance and use is hereafter termed OM ? system designers (as guidance when preparin
23、g their part of the OM ? installers and commissioning personnel (as guidance when preparing their part of the OM ? owners (as guidance when specifying the requirements for the OM ? safety arrangements, including air supply; ? domestic hot water production facilities; ? energy sources, storage and su
24、pply; ? flue gas systems, including condensate treatment and disposal; ? heat distribution network, including associated components; ? heat emitters, including accessories; ? control system; ? water treatments and procedures (e.g. chemical and physical, including antifreeze). Licensed Copy: sheffiel
25、dun sheffieldun, na, Sat Oct 28 11:40:53 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 12171:2002 (E) 5 2 Terms, definitions and abbreviations For the purposes of this European Standard, the following terms and definitions apply: 2.1 operation those actions necessary to make available the services,
26、which the system has been designed to provide 2.2 maintenance combination of all technical, administrative and managing actions necessary to retain an item in, or restore it to, a state in which it can perform an intended function 2.3 use the action of receiving the services, which the system has be
27、en designed to provide 2.4 item any part, component, device, sub-system, functional unit, equipment or system that can be individually considered NOTE 1 Any item may consist of hardware, software or both, and may also in particular cases include people. NOTE 2 A number of items (e.g. a population of
28、 items or a sample) may itself be considered as an item. 2.5 inspection procedure or action to check whether or not maintenance is required 2.6 OM ? the following statement: “These OM ? a functional diagram of the system, including cross-references to any marking (e.g. labels) on system components;
29、? information about major components of the system and essential technical data (e.g. fuel type, location of concealed pipes, ducts and components, pump duty, boiler output and design temperature, expansion vessel size); ? commissioning information and data (when specified by the system designer); ?
30、 the name and address of the installer and/or the compiler of the OM ? any warranty conditions. 4.2 Instructions for operation and use 4.2.1 General Instructions on the methods for system start-up, system shut down and emergency procedures shall be included. Further, where appropriate, instructions
31、on summer and winter operation of the system shall be included, as well as instructions on the methods for independent control of different sub-systems and/or zones. This information shall be made available for retention by the user, either in the manufacturers instructions for 1 Alternative terms s
32、hould be avoided. Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 11:40:53 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 12171:2002 (E) 7 appliances and components of the system or as provided by the person responsible for compiling the OM&U documents. 4.2.2 Control and safety devices Instruc
33、tions for operating the control and safety devices of the system shall be included. 4.2.3 Routine inspections and actions Instructions for routine inspections and actions, as required by the system designer and the manufacturers of appli- ances and components of the system, shall be included. 4.2.4
34、Local statutory requirements Any local statutory requirements for operation and use shall be included in the instructions. 4.2.5 Possible system malfunctioning Unless such information is provided elsewhere in the OM&U documents, the instructions shall include information for the user concerning poss
35、ible system malfunctioning, e.g. including advice that combustion or supply air openings and flue terminations shall not be covered, blocked or obstructed. 4.2.6 Gas or oil supply leakage Advice to the user concerning the action to be taken in the event of gas or oil supply leakage shall be included
36、 in the instructions. 4.3 Instructions for maintenance 2 4.3.1 General Instructions for maintenance shall be in accordance with requirements given by the manufacturers of appliances and components of the system. Additional requirements for maintenance given by the system designer or determined by lo
37、cal statutory regulations shall be included in the instructions. 4.3.2 System performances, safety and efficiency Advice to the user, that regular maintenance is necessary in order to maintain specified system performances, safety and efficiency, shall be included in the instructions. 2 Maintenance
38、actions may include preventive maintenance, corrective maintenance, servicing and/or repair. Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 11:40:53 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 12171:2002 (E) 8 4.3.3 Inspection, servicing and repair Recommendation to the user to employ trai
39、ned or competent persons for inspection, servicing and repair shall be included in the instructions3. 4.3.4 Maintenance record The instructions shall include provision for a maintenance record. 4.3.5 Safety and emergency procedures Instructions on safety and emergency procedures shall be included. 4
40、.4 Additional information Relevant literature, as available from local or national authorities, containing advice to users on the economical and energy conscious operation and use of the heating system shall be included in the OM&U documents. 3 This standard covers heating systems not requiring a tr
41、ained operator. It should be noted, with reference to the introduction of the standard, that the condition of not requiring a trained operator refers to the safe operation of the system not to the maintenance. Therefore, maintenance actions for these systems may indeed require trained or competent p
42、ersons. Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 11:40:53 GMT+00:00 2006, Uncontrolled Copy, (c) BSI blank Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 11:40:53 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 12171:2002 BSI 389 Chiswick High Road London W4 4AL BSI British St
43、andards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British
44、 Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the te
45、chnical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying
46、 standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for internationa
47、l standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical
48、 Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with sta
49、ndards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi