《BS-EN-13355-2004-A1-2009.pdf》由会员分享，可在线阅读，更多相关《BS-EN-13355-2004-A1-2009.pdf（50页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13355:2004 Coating plants Combined booths Safety requirements ICS 87.100 ? ? Licensed CopyChinese University of Hong Kong, 13/06/2009 05:14, Uncontrolled Copy, (c) BSI BS EN 13355:2004+A1:2009 This British Standard was published under the authority of the Standards Policy and
2、Strategy Committee on 19 January 2005 BSI 2009 ISBN 978 0 580 63169 6 National foreword This British Standard is the UK implementation of EN 13355:2004+A1:2009. It supersedes BS EN 13355:2004, which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee MCE/3/8, T
3、hermoprocessing equipment. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard
4、 cannot confer immunity from legal obligations. Amendments/corrigenda issued since publication DateComments The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text a
5、ltered by CEN amendment A1 is indicated by . ? 31 May 2009 Implementation of CEN amendment A1:2009 Licensed CopyChinese University of Hong Kong, 13/06/2009 05:14, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13355:2004+A1 April 2009 ICS 87.100 Supersedes EN 13355:2
6、004 English Version Coating plants - Combined booths - Safety requirements Installations dapplication - Cabines mixtes dapplication et de schage - Prescriptions de scurit Beschichtungsanlagen - Kombinierte Spritz- und Trocknungskabinen - Sicherheitsanforderungen This European Standard was approved b
7、y CEN on 22 November 2004 and includes Amendment 1 approved by CEN on 22 February 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date list
8、s and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the resp
9、onsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, I
10、celand, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Ave
11、nue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13355:2004+A1:2009: E Licensed CopyChinese University of Hong Kong, 13/06/2009 05:14, Uncontrolled Copy, (c) BSI EN 13355:2004+A1:2009 (E) 2 Conten
12、ts Page Foreword 4? Introduction . 5? 1?Scope 6? 2?Normative references 7? 3?Terms and definitions . 9? 4?List of significant hazards 11? 4.1?General 11? 4.2?Mechanical hazards . 11? 4.3?Electrical hazards 12? 4.4?Thermal hazards 12? 4.5?Hazards generated by noise . 12? 4.6?Hazards generated by radi
13、ation . 13? 4.7?Hazards resulting from dangerous substances . 13? 4.8?Fire and explosion hazards 13? 4.9?Hazards caused by failure of the energy supply and malfunction of the control system . 14? 4.10?Hazards caused by emergency stop devices . 14? 5?Safety requirements and/or measures 14? 5.1?Genera
14、l 14? 5.2?Mechanical 15? 5.3?Electrical . 16? 5.4?Thermal . 16? 5.5?Noise . 16? 5.6?Radiation . 17? 5.7?Safety requirements against dangerous substances 17? 5.8?Fire and explosion prevention and protection . 19? 5.9?Failure of energy supply and malfunction of the control system . 23? 5.10?Emergency
15、stop devices . 24? 6?Verification of the safety measure and/or measures . 24? 6.1?General 24? 6.2?Mechanical 24? 6.3?Electrical . 24? 6.4?Thermal . 24? 6.5?Noise . 24? 6.6?Radiation . 24? 6.7?Dangerous substances . 24? 6.8?Fire and explosion . 25? 6.9?Failure of energy supply . 26? 6.10?Emergency st
16、op devices . 26? 7?Information for use 26? 7.1?General 26? 7.2?Instruction handbook 27? 7.3?Marking . 29? Annex A (normative) Determination of concentration of flammable solvents in terms of LEL (spraying mode) 31? A.1?Equations 31? A.2?Examples of calculation 32? Annex B (normative) Measurement of
17、air velocities . 34? BS EN 13355:2004+A1:2009 Licensed CopyChinese University of Hong Kong, 13/06/2009 05:14, Uncontrolled Copy, (c) BSI EN 13355:2004+A1:2009 (E) 3 B.1?Instrumentation 34? B.2?Measurement conditions 34? Annex C (informative) Classification of materials reaction to the fire National
18、standards . 41? Annex D (informative) References to national exposure limit values . 42? Annex E (informative) Equivalence between zone description and categories of ignition protection 43? Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Direct
19、ive 98/37/EC !, amended by 98/79/EC“ 44? Annex ZB (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“ . 45? Bibliography 46? BS EN 13355:2004+A1:2009 Licensed CopyChinese University of Hong Kong, 13/06/2009 05:14, Uncontrolled Copy, (
20、c) BSI EN 13355:2004+A1:2009 (E) 4 Foreword This document (EN 13355:2004+A1:2009) has been prepared by Technical Committee CEN/TC 271 “Surface treatment equipment Safety”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publ
21、ication of an identical text or by endorsement, at the latest by October 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and su
22、pports essential requirements of EU Directive(s) 98/37/EC and 94/9/EC. !For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document.“ This document includes Amendment 1, approved by CEN on 2009-02-22. This document supersedes EN 13355:2004. The
23、 start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. This document is part of a series of standards in the area of safety for development and construction of machines and plants for the coating of surfaces with organic substances (paints, varnishes and s
24、imilar products). This document is mainly based on EN 12215 and EN 1539. NOTE Although a spray booth, as an integral whole, formally does not fall under the scope of the ATEX Directive 94/9/EC, the document is based upon a fundamental risk analysis according to this directive. According to the CEN/C
25、ENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Lux
26、embourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 13355:2004+A1:2009 Licensed CopyChinese University of Hong Kong, 13/06/2009 05:14, Uncontrolled Copy, (c) BSI EN 13355:2004+A1:2009 (E) 5 Introduction This documen
27、t is a C-type standard as stated in EN ISO 12100. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this document. When provisions of this type C standard are different from those which are stated in type A or B standar
28、ds, the provisions of this type C standard take precedence over the provisions of the other standards, for machines that have been designed and built according to the provisions of this type C standard. BS EN 13355:2004+A1:2009 Licensed CopyChinese University of Hong Kong, 13/06/2009 05:14, Uncontro
29、lled Copy, (c) BSI EN 13355:2004+A1:2009 (E) 6 1 Scope This document is applicable to combined booths for the application of organic liquid coating materials by an operator with maximum drying temperature of 100 C and deals with all hazards significant for combined booths, when they are used as inte
30、nded and under the conditions foreseen by the manufacturer (see clause 4). To the extent of this document, a combined booth is considered an assembly of the following equipment: forced ventilation by one or more fans, ventilation air heating system (e. g. heat exchanger or burner), power driven damp
31、ers, forced ventilation ducting, dry air filtering and/or wet air washing systems, automatic fire extinguishing equipment and additional specific electrical equipment, control and power circuits joined together for the spraying and drying process of liquid coating material in a space totally enclose
32、d provided with forced ventilation. working pit, in special case. This document does not cover: a) booths for automatic spraying, powder spray booths, open booths, and portable heaters. b) design of the building foundations upon which a booth is installed; c) the civil engineering and building desig
33、n where a booth is constructed as, or to use part of, a new or existing building; d) spraying equipment (see EN 1953), automatic devices for spraying systems like robots (see EN 775) or reciprocators or similar systems, conveyors, lifts and continuous handling equipment and systems (see EN 619). Thi
34、s document is not applicable to combined booths which are manufactured before the date of publication of this standard by CEN. BS EN 13355:2004+A1:2009 Licensed CopyChinese University of Hong Kong, 13/06/2009 05:14, Uncontrolled Copy, (c) BSI EN 13355:2004+A1:2009 (E) 7 2 Normative references The fo
35、llowing referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 418, Safety of machinery Emergency stop equipment, f
36、unctional aspects Principles for design EN 525, Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW EN 563, Safety of machinery Temperatures of touchable surfaces Ergonomics data to establish temperature limit values for hot surfaces
37、 EN 746-1, Industrial thermoprocessing equipment Part 1: Common safety requirements for industrial thermoprocessing equipment EN 746-2, Industrial thermoprocessing equipment Part 2: Safety requirements for combustion and fuel handling systems EN 954-1, Safety of machinery Safety related parts of con
38、trol systems Part 1: General principles for design EN 971-1:1996, Paints and varnishes Terms and definitions for coating materials Part 1: General terms EN 981, Safety of machinery System of auditory and visual danger and information signals EN 982, Safety of machinery Safety requirements for fluid
39、power systems and their components Hydraulics EN 983, Safety of machinery Safety requirements for fluid power systems and their components Pneumatics EN 1037, Safety of machinery Prevention of unexpected start-up EN 1088, Safety of machinery Interlocking devices associated with guards Principles for
40、 design and selection EN 1127-1:1997, Explosive atmospheres Explosion prevention and protection Part 1: Basic concepts and methodology EN 1539:2000; Dryers and ovens, in which flammable substances are released Safety requirements EN 1953, Atomising and spraying equipment for coating materials Safety
41、 requirements !EN 12753“, Thermal cleaning systems for exhaust gas from surface treatment equipment Safety requirements EN 12433-1, Industrial, commercial and garage doors and gates Terminology Part 1: Types of doors EN 12433-2, Industrial, commercial and garage doors and gates Terminology Part 2: P
42、arts of doors EN 12445, Industrial, commercial and garage doors and gates Safety in use of power operated doors Test methods EN 12453, Industrial, commercial and garage doors and gates Safety in use of power operated doors Requirements EN 12635, Industrial, commercial and garage doors and gates Inst
43、allation and use EN 12978, Industrial, commercial and garage doors and gates Safety devices for power operated doors and gates Requirements and test methods BS EN 13355:2004+A1:2009 Licensed CopyChinese University of Hong Kong, 13/06/2009 05:14, Uncontrolled Copy, (c) BSI EN 13355:2004+A1:2009 (E) 8
44、 EN 13463-1:2001, Non-electrical equipment for potentially explosive atmospheres Part 1: Basic method and requirements EN 13463-5, Non-electrical equipment intended for use in potentially explosive atmospheres Part 5: Protection by constructional safety “c“ EN 13478, Safety of machinery Fire prevent
45、ion and protection !EN 14462:2005, Surface treatment equipment Noise test code for surface treatment equipment including its ancillary handling equipment Accuracy grades 2 and 3“ !EN 14986“, Design of fans working in potentially explosive atmospheres EN 60079-0, Electrical apparatus for explosive ga
46、s atmospheres Part 0: General requirements (IEC 60079-0:2004) EN 60079-15, Electrical apparatus for explosive gas atmospheres Part 15: Type of protection “n” (IEC 60079-15:2001, modified) EN 60204-1:1997, Safety of machinery Electrical equipment of machines Part 1: General requirements (IEC 60204-1:
47、1997) EN 60529, Degrees of protection provided by enclosures (IP code) EN 61000-6-1, Electromagnetic compatibility (EMC) Part 6-1: Generic standards; Immunity for residential, commercial and light-industrial environments (IEC 61000-6-1:1997, modified) EN 61000-6-3, Electromagnetic compatibility (EMC
48、) Part 6-3: Generic standards; Emission standard for residential, commercial and light-industrial environments (IEC 61000-6-3:1996, modified) EN 61000-6-4, Electromagnetic compatibility (EMC) Part 6-4: Generic standards; Emission standard for industrial environments (IEC 61000-6-4:1997, modified) EN
49、 ISO 3746, Acoustics Determination of sound power levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995) EN ISO 4871, Acoustics Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) EN ISO 11202, Acoustics Noise emitted by machinery and equ