《BS-EN-1375-2002.pdf》由会员分享，可在线阅读，更多相关《BS-EN-1375-2002.pdf（30页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 1375:2002 Identification card system Intersector integrated circuit(s) card additional formats ID-000 card size and physical characteristics The European Standard EN 1375:2002 has the status of a British Standard ICS 35.240.15 ? Licensed Copy: sheffieldun sheffieldun, na, Sun
2、Oct 29 08:28:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 1375:2002 This British Standard, having been prepared under the direction of the DISC Board, was published under the authority of the Standards Policy and Strategy Committee on 9 December 2002 BSI 9 December 2002 ISBN 0 580 40960 0 Nat
3、ional foreword This British Standard is the official English language version of EN 1375:2002. It supersedes DD ENV 1375-1:1994 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee IST/17, Cards and personal identification, which has the responsibility to:
4、 A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International S
5、tandards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Stan
6、dard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and Europe
7、an developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 26, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendm
8、ents issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 08:28:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1375 October 2002 ICS 35.240.15Supersedes ENV 1375-1:1994 English version Identification
9、 card system - Intersector integrated circuit(s) card additional formats - ID-000 card size and physical characteristics Sytmes de cartes didentification - Autres formats pour les cartes circuit intgr intersectorielles - Dimensions et caractristiques physiques de la carte ID-000 Identifikationskarte
10、nsysteme - Zustzliche Formate von branchenbergreifenden Chipkarten - Kartengre ID-000 und physikalische Eigenschaften This European Standard was approved by CEN on 13 July 2002. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this E
11、uropean Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (Englis
12、h, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic
13、, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassa
14、rt, 36 B-1050 Brussels 2002 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1375:2002 E Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 08:28:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 1375:2002 (E) 2 Contents page Fore
15、word3 Introduction.4 1Scope 5 2Normative references 5 3Abbreviations.5 4Dimension of card5 4.1Card width and height.6 4.2Card thickness .6 4.3Corners .6 4.4Card edges7 5Card construction7 6Card material7 7Card characteristics 7 7.1General7 7.1.1Flammability.7 7.1.2Toxicity7 7.1.3Resistance to chemic
16、als.8 7.1.4Card dimensional stability with temperature and humidity 8 7.1.5Light 8 7.1.6Durability.8 7.1.7Adhesion or blocking 8 8Characteristics related to the integrated circuit cards 8 9Dimensions and location of contacts8 9.1Dimensions of the contacts8 9.2Location of contacts9 9.3Assignment of t
17、he contacts9 10Electrical characteristics resistance9 10.1Static electricity resistance.9 10.2Electrical resistance (of contacts) .9 11Other features.9 Annex A (normative) Test methods for ID-000 card 10 Annex B (informative) Relationship between ID-000 and ID-125 Bibliography26 Licensed Copy: sheff
18、ieldun sheffieldun, na, Sun Oct 29 08:28:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 1375:2002 (E) 3 Foreword This document (EN 1375:2002) has been prepared by Technical Committee CEN /TC 224, “Machine-readable cards, related device interfaces and operations“, the secretariat of which is held b
19、y AFNOR. This document supersedes ENV 1375-1:1994. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2003, and conflicting national standards shall be withdrawn at the latest by April 2003. Ac
20、cording to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway
21、, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Annex A is normative and annex B is informative. Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 08:28:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 1375:2002 (E) 4 Introduction Europe has additional size of IC-card formats rel
22、ated to the standardized ID-1 cards. The additional sizes are called ID-00 and ID-000. Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 08:28:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 1375:2002 (E) 5 1 Scope This European Standard defines an ICC format in addition to already standardize
23、d ID-1 format. ID-000 format may be derived from ID-1 format as shown in the annex B. This Standard specifies physical characteristics as well as dimensions, locations and assignment of the contacts of cards with integrated circuit(s) plus the related test methods. 2 Normative references This Europe
24、an Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text, and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications
25、apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN ISO/IEC 7810:1996, Identification cards - Physical characteristics (ISO/IEC 7810:1995). EN ISO 105-E04, T
26、extiles - Tests for colour fastness - Part E04: Colour fastness to perspiration (ISO 105- E04:1994). EN ISO 1302, Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation (ISO 1302:2002). ISO 1817, Rubber, vulcanized - Determination of the effect of
27、 liquids. ISO 9227, Corrosion tests in artificial atmospheres - Salt spray tests. ISO/IEC 7816-1, Identification cards - Integrated circuit(s) cards with contacts - Part 1: Physical characteristics. ISO/IEC 7816-2:1999, Information technology - Identification cards - Integrated circuit(s) cards with
28、 contacts - Part 2: Dimensions and location of the contacts. ISO/IEC 7816-3:1997, Information technology - Identification cards - Integrated circuit(s) cards with contacts - Part 3: Electronic signals and transmission protocols. ISO/IEC 10373-1, Identification cards - Test methods - Part 1: General
29、characteristics tests. 3 Abbreviations ATR Answer to reset (refer to ISO/IEC 7816-3:1997). 4 Dimension of card The nominal dimensions of the ID-000 card are shown in Table 1. Table 1 Dimensions Card typeWidth in mm Height in mm Thickness in mm ID-00025,0015,000,76 Licensed Copy: sheffieldun sheffiel
30、dun, na, Sun Oct 29 08:28:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 1375:2002 (E) 6 4.1 Card width and height All points on the edges of the card in the finished state, except for the rounded corners and cut corner shall fall between two concentric, similarly aligned rectangles which are dime
31、nsioned as follows: outer rectangle:width25,10 mm; height15,10 mm; inner rectangle:width24,90 mm; height14,90 mm. Dimensions in millimetres Figure 1 Card dimensional tolerances 4.2 Card thickness The thickness of the card shall be (0,76 0,08) mm. 4.3 Corners The corners shall be rounded with a radiu
32、s of (1,00 0,10) mm. Care should be taken to avoid misalignments between the rounded corners and the straight edges of the card. The low right corner shall have a (45 2) cut. Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 08:28:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 1375:2002 (E) 7
33、 Dimensions in millimetres Key 1Upper edge 2Left edge Figure 2 Card corner dimensions 4.4 Card edges Edge burrs normal to the card face shall not exceed 0,08 mm above the card surface. 5 Card construction The card may be of solid, laminated, or bonded material. 6 Card material The card shall be made
34、 of PVC (polyvinyl chloride) and/or PVCA (polyvinyl chloride acetate) or material having equal or better performance such as polyester, polyethylenes and polycarbonates. Card insert material Standard may be used. They are not, however, specified in this European Standard. NOTERigid PVC and PVCA are
35、sensitive to the effects of plastizisers which can be incorporated in some flexible plastic materials. Identification cards kept in contact with such flexible plastics may soften, harden, or deform. 7 Card characteristics 7.1 General The following general characteristics apply to ID-000 cards. 7.1.1
36、 Flammability As specified in EN ISO/IEC 7810:1996. 7.1.2 Toxicity As specified in EN ISO/IEC 7810:1996. Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 08:28:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 1375:2002 (E) 8 7.1.3 Resistance to chemicals The card shall not exhibit any adverse
37、effects in lamination or physical dimensions when submerged into separate solutions, as described in ISO/IEC 10373-1. 7.1.4 Card dimensional stability with temperature and humidity As specified in 8.1.5 of EN ISO/IEC 7810:1996 with the exception of the last sentence which reads “the structural relia
38、bility shall remain in compliance for dimensional stability with clause 5, 8.1.11 and 8.1.12“. 7.1.5 Light As specified in EN ISO/IEC 7810:1996. 7.1.6 Durability As specified in EN ISO/IEC 7810:1996. 7.1.7 Adhesion or blocking As specified in EN ISO/IEC 7810:1996 but without the words “without embos
39、sing“. 8 Characteristics related to the integrated circuit cards The physical characteristics as described in ISO/IEC 7816-1 in relation to the integrated circuit cards shall also apply. 9 Dimensions and location of contacts 9.1 Dimensions of the contacts As specified in ISO/IEC 7816-2. Licensed Cop
40、y: sheffieldun sheffieldun, na, Sun Oct 29 08:28:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 1375:2002 (E) 9 9.2 Location of contacts Dimensions in millimetres Key 1Upper edge 2Left edge Figure 3 Contacts location 9.3 Assignment of the contacts C1, C2, C3, C5 and C7 are assigned as specified in
41、 Table 1 of ISO/IEC 7816-2:1999. C4, C6 and C8 are reserved for further standardization by CEN/TC 224. 10 Electrical characteristics resistance 10.1 Static electricity resistance As specified in ISO/IEC 7816-1. 10.2 Electrical resistance (of contacts) As specified in ISO/IEC 7816-1. 11 Other feature
42、s All other specifications from ISO/IEC 7816-1, ISO/IEC 7816-2 and ISO/IEC 7816-3 apply with the exception that no magnetic stripe and no embossing shall be on this card type. Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 08:28:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 1375:2002 (E)
43、10 Annex A (normative) Test methods for ID-000 card A.1 Default test environment and conditioning and functional test A.1.1 Default test environment and conditioning As specified in ISO/IEC 10373-1. A.1.2 Functional test For the purpose of evaluation of cards after some tests, functional test for th
44、e integrated circuits is defined as “Electrical continuity of contacts and Answer to reset (ATR)“. A.2 Test methods A.2.1 Dimensions of cards The purpose of this test method is to measure the height, width and thickness of a card in the test sample. A.2.1.1 Thickness of card measurements A.2.1.1.1 A
45、pparatus A micrometer with a flat anvil and spindle whose diameter is within the range of 3 mm to 8 mm. A.2.1.1.2 Procedure Use the micrometer to measure the thickness of the card at one point, outside of the contact area (see Figure A.1 for the area of measurement). Micrometer force shall be 3,5 N
46、to 5,9 N. Key 1Measurement area Figure A.1 Assignment of the measurement area A.2.1.1.3 Result The value of the measurement shall be compared with the standardized value. Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 08:28:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 1375:2002 (E) 11 A.
47、2.1.2 Height and width of card measurement A.2.1.2.1 Apparatus A level horizontal rigid surface of a roughness not greater than 3,2 m according to EN ISO 1302. A profile projector with a precision of 2,5 m or adequate measuring device with the same accuracy. The load shall be of (2,2 0,2) N. A.2.1.2
48、.2 Procedure The card to be tested shall be placed on the level horizontal rigid surface and flattened under the (2,2 0,2) N load. Use the profile projector to measure the height and width of the card. A.2.1.2.3 Result The measurements obtained shall be compared with those given in this standard. A.
49、2.2 Resistance to chemicals The purpose of this test method is to determine any adverse effects of specified chemicals to the normal use of the card in a test sample. The resistance to chemicals is defined as the extent to which card performance and appearance is affected by exposure to commonly encountered chemicals. A.2.2.1 Procedure A different card is used for each test. Immediately after removal from the solution, wash the card in distilled water and dry it with ab