《BS-EN-13476-3-2007.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13476-3-2007.pdf(48页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13476-3:2007 Plastics piping systems for non-pressure underground drainage and sewerage Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 3: Specifications for pipes and fittings with smooth internal and
2、 profiled external surface and the system, Type B The European Standard EN 13476-3:2007 has the status of a British Standard ICS 23.040.20; 93.030 ? Licensed Copy: London South Bank University, London South Bank University, Wed Aug 08 03:55:48 GMT+00:00 2007, Uncontrolled Copy, (c) BSI BS EN 13476-3
3、:2007 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2007 BSI 2007 ISBN 978 0 580 53624 3 National foreword This British Standard is the UK implementation of EN 13476-3:2007. It does not supersede any current British Standards. Howev
4、er, the Water Industry has indicated that following the publication of this British Standard, Industry Specification WIS 4-35-01 will be declared obsolescent by 29 May 2009 and retained for reference where applicable. The UK participation in its preparation was entrusted by Technical Committee PRI/8
5、8, Plastics piping systems and components, to Subcommittee PRI/88/1, Thermoplastics piping systems and components for non-pressure applications. A list of organizations represented on this subcommittee can be obtained on request to its secretary. Sewerage undertakers and other entities deemed to be
6、within the scope of the Public Procurement Directive (PPD) are obliged to use Parts 1 to 3 of this series of European Standards, produced under EC/U mandate, if they are to comply with structured wall pipe systems or components within its scope. National Annex NA (informative) gives additional guida
7、nce on the use of Parts 1 to 3 of BS EN 13476:2007. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since pu
8、blication Amd. No. DateComments Licensed Copy: London South Bank University, London South Bank University, Wed Aug 08 03:55:48 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13476-3 May 2007 ICS 93.030 English Version Plastics piping systems for non-p
9、ressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B Systmes de cana
10、lisations en plastique pour les branchements et les collecteurs dassainissement sans pression enterrs - Systmes de canalisations parois structures en poly(chlorure de vinyle) non plastifi (PVC- U), polypropylne (PP) et polythylne (PE) - Partie 3: Spcifications pour les tubes et raccords avec une sur
11、face interne lisse et une surface externe profile et le systme, de Type B Kunststoff-Rohrleitungssysteme fr erdverlegte drucklose Abwasserkanle und -leitung - Rohrleitungssysteme mit profilierter Wandung aus weichmacherfreiem Polvinylchlorid (PVC-U), Polypropylen (PP) und Polyethylen (PE) - Teil 3:
12、Anforderungen an Rohre, Formstcke und das Rohrleitungssystem, Rohrtyp B This European Standard was approved by CEN on 5 March 2007. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national stan
13、dard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other
14、 language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia,
15、Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCH
16、ES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2007 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13476-3:2007: E Licensed Copy: London South Bank University, London South Bank University, Wed Aug 08
17、03:55:48 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 13476-3:2007 (E) 2 Contents Page Foreword 4 Introduction 5 1 Scope 6 2 Normative references 6 3 Terms, Definitions, symbols and abbreviations 8 3.1 Definitions 8 3.2 Symbols 8 3.3 Abbreviations 9 4 Material 10 4.1 General 10 4.2 Unplasticized po
18、ly(vinyl chloride) (PVC-U) 10 4.2.1 General 10 4.2.2 Pipe and fitting material characteristics 10 4.2.3 Utilisation of non-virgin materials 11 4.3 Polypropylene (PP) 11 4.3.1 General 11 4.3.2 Pipe and fitting material characteristics 11 4.3.3 Melt mass-flow rate classification 12 4.3.4 Utilisation o
19、f non-virgin materials 12 4.4 Polyethylene (PE) 13 4.4.1 General 13 4.4.2 Material characteristics of pipes and injection-moulded fittings 13 4.4.3 Material characteristics of rotational-moulded fittings 13 4.4.4 Utilisation of non-virgin materials 14 4.4.5 Sealing ring retaining components 14 4.5 S
20、ealing rings 14 4.6 Fused or welded joints 14 4.7 Adhesives for PVC-U 14 5 Designation of wall constructions and examples of typical jointing methods 15 5.1 Wall constructions designated as Type B 15 5.1.1 Ribbed or corrugated construction 15 5.1.2 Typical jointing methods for structured-wall type B
21、 15 5.2 Designation and design of joints 16 6 Appearance and colour 16 7 Geometrical characteristics 17 7.1 General 17 7.2 Dimensions 17 7.2.1 Designation 17 7.2.2 Lengths of pipe 17 7.2.3 Diameters 17 7.2.4 Diameters and jointing dimensions of sockets and spigots 19 7.2.5 Wall thicknesses 20 7.3 Ty
22、pes of fittings 22 7.3.1 Design length of fittings 22 8 Physical characteristics 23 8.1 Unplastisized poly(vinyl chloride) (PVC-U) 23 8.1.1 Physical characteristics of PVC-U pipes 23 Licensed Copy: London South Bank University, London South Bank University, Wed Aug 08 03:55:48 GMT+00:00 2007, Uncont
23、rolled Copy, (c) BSI EN 13476-3:2007 (E) 3 8.1.2 Physical characteristics of PVC-U fittings 23 8.2 Polypropylene (PP) 24 8.2.1 Physical characteristics of PP pipes 24 8.2.2 Physical characteristics of PP fittings 24 8.3 Polyethylene (PE) 24 8.3.1 Physical characteristics of PE pipes 24 8.3.2 Physica
24、l characteristics of PE fittings 25 9 Mechanical characteristics 25 9.1 Mechanical characteristics of pipes 25 9.1.1 General requirements 25 9.1.2 Ring flexibility 26 9.1.3 Tensile strength 27 9.2 Mechanical characteristics of fittings 27 10 Performance requirements 28 11 Marking 29 11.1 General 29
25、11.2 Minimum required marking 30 11.2.1 Pipes 30 11.2.2 Fittings 30 11.3 Additional marking 31 11.3.1 General 31 11.3.2 Third party certified pipes and fittings 31 Annex A (normative) Virgin PVC-U material 32 Annex B (normative) Utilisation of non-virgin PVC-U material 33 B.1 Reprocessable and recyc
26、lable material from pipes and fittings 33 B.2 External reprocessable and recyclable materials with agreed specification 33 B.3 External reprocessable and recyclable materials not covered by an agreed specification 33 Annex C (normative) Virgin PP material 35 Annex D (normative) Utilisation of non-vi
27、rgin PP material 36 D.1 Reprocessable and recyclable material from pipes and fittings 36 D.2 External reprocessable and recyclable materials with an agreed specification 36 D.3 External reprocessable and recyclable materials not covered by an agreed specification 36 Annex E (normative) Virgin PE mat
28、erial 37 Annex F (normative) Utilisation of non-virgin PE material 38 F.1 Reprocessable and recyclable material from pipes and fittings 38 F.2 External reprocessable and recyclable materials with an agreed specification 38 F.3 External reprocessable and recyclable materials not covered by an agreed
29、specification 38 F.4 External reprocessable and recyclable material from PE rotational-moulded fittings and other components 39 Annex G (normative) Impact test at 23 C 40 Annex H (normative) Impact test at 10 C 41 Annex I (normative) Ring flexibility test at 20 % diametric deflection 42 Annex J (inf
30、ormative) Survey of possible use of reprocessable and recyclable material 43 National Annex NA (informative) to BS EN 13476-3:2007 44 Additional guidance for UK users Licensed Copy: London South Bank University, London South Bank University, Wed Aug 08 03:55:48 GMT+00:00 2007, Uncontrolled Copy, (c)
31、 BSI EN 13476-3:2007 (E) 4 Foreword This document (EN 13476-3:2007) has been prepared by Technical Committee CEN/TC 155 “Plastics piping systems and ducting systems”, the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publicati
32、on of an identical text or by endorsement, at the latest by November 2007, and conflicting national standards shall be withdrawn at the latest by November 2007. This standard is a Part of a System Standard for plastics piping systems of particular materials for a specified application. There are a n
33、umber of such System Standards. System Standards are based on the results of the work being undertaken in ISO/TC 138 “Plastics pipes, fittings and valves for the transport of fluids”, which is a Technical Committee of the International Organization for Standardization (ISO). They are supported by se
34、parate standards on test methods to which references are made throughout the System Standard. The System Standards are consistent with general standards on functional requirements and on recommended practice for installation. EN 13476 consists of the following Parts under the general title Plastics
35、piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE): Part 1: General requirements and performance characteristics; Part 2: Specifications for pipes and fittings with
36、 smooth internal and external surface and the system, Type A; Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B (this standard); Part 4: Assessment of conformity (CEN/TS); Part 5: Guidance for installation (CEN/TS).1 For pipes and
37、 fittings which have conformed to the relevant national standard before May 2007, as shown by the manufacturer or by a certification body, the national standard may continue to be applied until May 2009. National standards specifically for pipes and fittings for the transport of surface water are no
38、t considered to be conflicting with this standard and may thus be allowed to coexist. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic,
39、Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. 1 The feasibility of this project is under study. Licensed Co
40、py: London South Bank University, London South Bank University, Wed Aug 08 03:55:48 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 13476-3:2007 (E) 5 Introduction This standard provides optional choices for impact resistance (see Annex G and Annex H) and ring flexibility (see Annex I). As appropriate
41、, the individual countries may select between those options in their national forewords. Licensed Copy: London South Bank University, London South Bank University, Wed Aug 08 03:55:48 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 13476-3:2007 (E) 6 1 Scope This part of EN 13476, together with EN 134
42、76-1, specifies the definitions and requirements for pipes, fittings and the system based on unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) structured-wall piping systems that are intended to be used for non-pressure underground drainage and sewerage systems. Th
43、is part is applicable to pipes and fittings with smooth internal and profiled external surfaces, designated as Type B. It specifies test methods and test parameters as well as requirements. This part is applicable to: a) structured-wall pipes and fittings, which are intended to be used buried underg
44、round outside the building structure, reflected in the marking of products by “U”; b) structured-wall pipes and fittings, which are intended to be used buried underground both outside (application area code “U”) and within the building structure (application area code “D”), reflected in the marking
45、of products by “UD”. This part is applicable to structured-wall pipes and fittings with or without an integral socket with elastomeric ring seal joints as well as welded and fused joints. This part covers a range of pipe and fitting sizes, materials, pipe constructions, stiffness classes, applicatio
46、n classes, and tolerance classes and gives recommendations concerning colours. NOTE 1 It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation
47、 practices or codes. NOTE 2 For dimensions larger than DN 1200 OD/ID this document may be applied regarding appearance, colour, physical and mechanical characteristics as well as performance requirements. 2 Normative references The following referenced documents are indispensable for the application
48、 of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 476, General requirements for components used in discharge pipes, drains and sewers for gravity systems EN 580, Plasti
49、cs piping systems Unplasticized poly(vinyl chloride) (PVC-U) pipes Test method for the resistance to dichloromethane at a specified temperature (DCMT) EN 681-1, Elastomeric seals Materials requirements for pipe joint seals used in water and drainage applications Part 1: Vulcanized rubber EN 681-2, Elastomeric seals Materials requirements for pipe joint seals used in water and drainage applications Part 2: Thermoplastic elastomers EN 681-4, Elasto