《BS-EN-3841-511-2004.pdf》由会员分享，可在线阅读，更多相关《BS-EN-3841-511-2004.pdf（8页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD AEROSPACE SERIES BS EN 3841-511:2004 Circuit breakers Test methods Part 511: Combined test: temperature, altitude and vibration The European Standard EN 3841-511:2004 has the status of a British Standard ICS 49.060 ? Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 04 02:28:34 GM
2、T+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 3841-511:2004 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 24 February 2005 BSI 24 February 2005 ISBN 0 580 45547 5 National foreword This British Standard is the official English language ver
3、sion of EN 3841-511:2004. The UK participation in its preparation was entrusted by Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology, to Subcommittee ACE/6/5, Circuit breakers, which has the responsibility to: A list of organizations represented on this subcommittee
4、can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search
5、” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obli
6、gations. aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This
7、document comprises a front cover, an inside front cover, the EN title page, pages 2 to 5 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun
8、, na, Sat Nov 04 02:28:34 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3841-511 December 2004 ICS 49.060 English version Aerospace series - Circuit breakers - Test methods - Part 511: Combined test: temperature, altitude and vibration Srie arospatia
9、le - Disjoncteurs - Mthodes dessais - Partie 511 : Essai combin : temprature, altitude et vibrations Luft- und Raumfahrt - Schutzschalter - Prfverfahren - Teil 511: Kombinierter Versuch: Temperatur, Hhe und Schwingung This European Standard was approved by CEN on 10 September 2004. CEN members are b
10、ound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the
11、 Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same statu
12、s as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia
13、, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2004 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN nati
14、onal Members. Ref. No. EN 3841-511:2004: E Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 04 02:28:34 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 3841-511:2004 (E) 2 Contents Page 1 Scope4 2 Normative references4 3 Method4 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 04 02:28:34 GMT+00
15、:00 2006, Uncontrolled Copy, (c) BSI EN 3841-511:2004 (E) 3 Foreword This document (EN 3841-511:2004) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this
16、Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the
17、latest by June 2005, and conflicting national standards shall be withdrawn at the latest by June 2005. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Rep
18、ublic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 04 02:28:34
19、 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 3841-511:2004 (E) 4 1 Scope This standard specifies a method for a combined test of temperature, altitude and vibration of circuit breakers. It shall be used together with EN 3841-100. 2 Normative references The following referenced documents are indisp
20、ensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 3841-100, Aerospace series Circuit breakers Test methods Part 100: General EN 3841-506, Aer
21、ospace series Circuit breakers Test methods Part 506: Vibration performance 3 Method 3.1 Mounting The circuit breakers shall be mounted in a test chamber on the vibrator according to 4.2 and 4.3 in EN 3841-100. The means of mounting shall be designed so as to transmit vibrations over the whole frequ
22、ency range without absorption or natural resonance. An example of an apparatus is given in Figure 1. The electrical connection shall be made with the cables of the sections specified in EN 3841-100, Table 1. The connection cables shall be attached to the vibration support approximately 100 mm from t
23、he terminals. The circuit breakers and the cables shall be mounted with the torque indicated in the product standard. Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 04 02:28:34 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 3841-511:2004 (E) 5 Key 1 Acceleration control 6 Circuit breaker test ch
24、amber 2 Temperature control 7 Circuit breaker 3 Pressure generator and control 8 Circuit breaker support 4 Electrical cables 9 Temperature test chamber (fixed) 5 Flexible seal 10 Vibrator Figure 1 3.2 Procedure The circuit breakers shall be subjected to a load in accordance with the values specified
25、 in the technical specification, until thermal stabilization. The temperature and the pressure in the circuit breakers test chamber shall be stabilized, and maintained at the values specified in the technical specification. NOTE The temperature shall be measured at the lower and the upper level of t
26、he test chamber, and the difference shall be 10 C maximum. The tolerance for pressure shall be 3 %. The circuit breakers shall be subjected to the vibration test according to 3.2 in EN 3841-506, at the values specified in the technical specification. 3.3 Requirement Requirements in accordance with t
27、echnical specification and product standard. Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 04 02:28:34 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 3841-511:2004 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for
28、preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or ed
29、itions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the
30、inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards public
31、ations should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those t
32、hat have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services a
33、re also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase pri
34、ce of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further informat
35、ion about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no ex
36、tract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as s
37、ymbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-. Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 04 02:28:34 GMT+00:00 2006, Uncontrolled Copy, (c) BSI