《BS-EN-4199-002-2006.pdf》由会员分享，可在线阅读，更多相关《BS-EN-4199-002-2006.pdf（8页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 4199-002:2006 Aerospace series Bonding straps for aircraft Part 002: Index of product standard The European Standard EN 4199-002:2006 has the status of a British Standard ICS 49.060 ? Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 04 08:03:15 GMT+00:00 2006, Uncontrolled
2、Copy, (c) BSI BS EN 4199-002:2006 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2006 BSI 2006 ISBN 0 580 49240 0 National foreword This British Standard was published by BSI. It is the UK implementation of EN 4199-002:2006. The U
3、K participation in its preparation was entrusted by Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology, to Subcommittee ACE/6/-/8, Aerospace Installations Accessories, tools and terminations. A list of organizations represented on ACE/6/-/8 can be obtained on request
4、to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments Li
5、censed Copy: sheffieldun sheffieldun, na, Sat Nov 04 08:03:15 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4199-002 May 2006 ICS 49.060 English Version Aerospace series - Bonding straps for aircraft - Part 002: Index of product standard Srie arospat
6、iale - Tresses de mtallisation pour avion - Partie 002 : Liste des normes de produit Luft- und Raumfahrt - Masseverbinder fr Luftfahrzeuge - Teil 002: Liste der Produktnormen This European Standard was approved by CEN on 20 February 2006. CEN members are bound to comply with the CEN/CENELEC Internal
7、 Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. T
8、his European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are
9、the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and Un
10、ited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2006 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4199-002:
11、2006: E Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 04 08:03:15 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 4199-002:2006 (E) 2 Contents Page Foreword 3 1 Scope.4 2 Normative references .4 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 04 08:03:15 GMT+00:00 2006, Uncontrolled Copy, (c
12、) BSI EN 4199-002:2006 (E) 3 Foreword This European Standard (EN 4199-002:2006) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received
13、the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 200
14、6, and conflicting national standards shall be withdrawn at the latest by November 2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent right
15、s. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
16、 Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 04 08:03:15 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 4199-002:2006 (E) 4 1 Scope This standar
17、d provides a list of all parts of EN 4199 required for the production of bonding straps for aircraft. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the la
18、test edition of the referenced document (including any amendments) applies. EN 4199-001, Aerospace series Bonding straps for aircraft Part 001: Technical specification. EN 4199-003, Aerospace series Bonding straps for aircraft Part 003: Bonding strap assemblies with flat braided conductor copper, ti
19、n plated 65 C up to 150 C and copper, nickel plated 65 C up to 260 C Product standard. 1) EN 4199-004, Aerospace series Bonding straps for aircraft Part 004: Round bonding straps, copper, tin plated 65 C up to 150 C and copper, nickel plated 65 C up to 260 C Product standard. 2) EN 4199-005, Aerospa
20、ce series Bonding straps for aircraft Part 005: Flat braid conductors copper, tin plated 65 C up to 150 C and copper, nickel plated 65 C up to 260 C Product standard. 1) EN 4199-006, Aerospace series Bonding straps for aircraft Part 006: Round braid copper conductors for bonding straps, tin plated u
21、p to 150 C or nickel plated up to 260 C Product standard. EN 4199-007, Aerospace series Bonding straps for aircraft Part 007: Insulated bonding strap assemblies with flat braid conductors copper, tin plated 65 C up to 120 C or copper, nickel plated 65 C up to 260 C Product standard. 1) EN 4199-008,
22、Aerospace series Bonding straps for aircraft Part 008: Insulated bonding strap assemblies with aluminium conductors Product standard. 1) EN 4199-009, Aerospace series Bonding straps for aircraft Part 009: Insulated bonding strap with round aluminium conductors Product standard. 1) 1) In preparation
23、at the date of publication of this standard. 2) Published as AECMA Prestandard at the date of publication of this standard. Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 04 08:03:15 GMT+00:00 2006, Uncontrolled Copy, (c) BSI blank Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 04 08:03:15
24、 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 4199-002:2006 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level.
25、It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grate
26、ful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual upd
27、ating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email:
28、ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provi
29、des a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:
30、+44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8
31、996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI pub
32、lications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic,
33、 photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than imp
34、lementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-. Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 04 08:03:15 GMT+00:00 2006, Uncontrolled Copy, (c) BSI