《BS-EN-4468-2007.pdf》由会员分享,可在线阅读,更多相关《BS-EN-4468-2007.pdf(10页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 4468:2007 Aerospace series Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) Vacuum induction melted and consumable electrode remelted Solution treated and precipitation treated Bar a or D u u 150 mm Rm W W 1 300 MPa ICS 49.025.10 ? Copyright British Standards Institution Provided by IHS u
2、nder license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 20:34:35 MDTNo reproduction or networking permitted without license from IHS -,-,- BS EN 4468:2007 This British Standard was published under the authority of the Standards Policy and Strategy Committee
3、 on 30 June 2008 BSI 2008 ISBN 978 0 580 61231 2 National foreword This British Standard is the UK implementation of EN 4468:2007. The UK participation in its preparation was entrusted by Technical Committee ACE/61, Metallic materials for aerospace purposes, to Panel ACE/61/-/15, Steels. A list of o
4、rganizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obl
5、igations. Amendments/corrigenda issued since publication DateComments Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 20:34:35 MDTNo reproduction or networking permitted without license from I
6、HS -,-,- EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4468 July 2007 ICS 49.025.10 English Version Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D 150 mm - Rm 1 300
7、 MPa Srie arospatiale - Acier FE-PM1505 (X1CrNiMoAlTi12-9- 2) - labor sous vide par induction et refondu llectrode consommable - Mis en solution et vieilli - Barres - a ou D 150 mm - Rm 1 300 MPa Luft- und Raumfahrt - Stahl FE-PM1505 (X1CrNiMoAlTi12- 9-2) - Vakuuminduktionserschmolzen und mit selbst
8、verzehrender Elektrode umgeschmolzen - Lsungsgeglht und ausgelagert - Stangen - a oder D 150 mm - Rm 1 300 MPa This European Standard was approved by CEN on 15 February 2007. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Euro
9、pean Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (Engli
10、sh, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria,
11、 Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATI
12、ON COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4468:2007: E Copyright British Standards Institution Provi
13、ded by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 20:34:35 MDTNo reproduction or networking permitted without license from IHS -,-,- 2 Foreword This document (EN 4468:2007) has been prepared by the Aerospace and Defence Industries Associat
14、ion of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This Eu
15、ropean Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2008, and conflicting national standards shall be withdrawn at the latest by January 2008. Attention is drawn to the possibility that some of the e
16、lements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this
17、 European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the U
18、nited Kingdom. BS EN 4468:2007 Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 20:34:35 MDTNo reproduction or networking permitted without license from IHS -,-,- 3 Introduction This standard i
19、s part of the series of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258. This standard has been prepared in accordance with EN 4500-5. 1 Scope This standard specifies the requirements relating to: Steel FE-PM1505 (X1CrNiMoAlT
20、i12-9-2) Vacuum induction melted and consumable electrode remelted Solution treated and precipitation treated Bar a or D 150 mm Rm 1 300 MPa for aerospace applications. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated referen
21、ces, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2043, Aerospace series Metallic materials General requirements for semi-finished product qualification (excluding forgings and castings). 1) EN 4258, Aero
22、space series Metallic materials General organization of standardization Links between types of EN standards and their use. EN 4436, Aerospace series Steel Test methods Determination of ferrite content. 1) EN 4500-5, Aerospace series Metallic materials Rules for drafting and presentation of material
23、standards Part 5: Specific rules for steels. 1) EN 4700-2, Aerospace series Steel and heat resisting alloys Wrought products Technical specification Part 2: Bar and section. 1) 1) Published as ASD Prestandard at the date of publication of this standard. BS EN 4468:2007 Copyright British Standards In
24、stitution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 20:34:35 MDTNo reproduction or networking permitted without license from IHS -,-,- 4 1 Material designation Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) Element C Si Mn P S Cr Mo Ni
25、Al Ti N2 Fe min. 11,50 1,85 8,50 0,60 0,28 2 Chemical composition % max. 0,015 0,10 0,10 0,010 0,005 12,50 2,15 9,50 0,80 0,37 0,010 Base 3 Method of melting Vacuum induction melted and consumable electrode remelted 4.1 Form Bar 4.2 Method of production 4.3 Limit dimension(s) mm a or D 150 5 Technic
26、al specification EN 4700-2 Delivery condition Solution treated Solution treated and precipitation treated 6.1 Heat treatment 820 C 860 C / OQ, AQ or WQ + cooling to 20 C 820 C 860 C / OQ, AQ or WQ + cooling to 20 C + 525 C 545 C / t 4 h / AC 6.2 Delivery condition code W U Use condition Solution tre
27、ated and precipitation treated Delivery condition 7 Heat treatment Delivery condition + 525 C 545 C / t 4 h / AC Characteristics 8.1 Test sample(s) See EN 4700-2. 8.2 Test piece(s) See EN 4700-2. 8.3 Heat treatment Delivery condition Use condition 9 Dimensions concerned mm a or D 150 a or D 150 a 75
28、 a or D 150 a 10 Thickness of cladding on each face % 11 Direction of test piece L T 12 Temperature C Ambient Ambient 13 Proof stress Rp0,2 MPa 1 200 1 200 14 Strength Rm MPa 1 300 1 300 15 Elongation A % 11 9 16 T Reduction of area Z % 50 45 17 Hardness 363 HB 380 HB 380 HB 18 Shear strength Rc MPa
29、 19 Bending k 20 Impact strength KV 50 J ; Notch direction T + KV 20 J, at 40 C ; Notch direction T KV 40 J ; Notch direction L + KV 15 J, at 40 C ; Notch direction L 21 Temperature C 22 Time h 23 Stress a MPa 24 Elongation a % 25 Rupture stress R MPa 26 C Elongation at rupture A % 27 Notes (see lin
30、e 98) a BS EN 4468:2007 Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 20:34:35 MDTNo reproduction or networking permitted without license from IHS -,-,- 5 30 Microstructure 1 EN 4436 2 One p
31、er cast 3 Corresponding to ingot top 7 The -ferrite content shall not exceed 2 % 34 Grain size See EN 4700-2. 7 G 6 44 External defects See EN 4700-2. 1 Visual 50 Cleanliness / inclusion content See EN 4700-2. (micro-cleanness) 7 Category 5 51 Macrostructure See EN 4700-2. 7 Class Condition Severity
32、 1 Freckles A 2 White spots A 3 Radial segregation A 4 Ring pattern B 61 Internal defects See EN 4700-2. 6 a or D 100 mm may be tested either on the product or at an earlier stage of manufacturing. 7 Class 5 95 Marking inspection See EN 4700-2. 96 Dimensional inspection See EN 4700-2. 98 Notes a 75
33、mm a or D 150 mm may be tested in L or T direction. 99 Typical use BS EN 4468:2007 Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 20:34:35 MDTNo reproduction or networking permitted without l
34、icense from IHS -,-,- 6 100 Product qualification See EN 2043. Qualification programme to be agreed between manufacturer and purchaser. BS EN 4468:2007 Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/
35、14/2008 20:34:35 MDTNo reproduction or networking permitted without license from IHS -,-,- blank Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 20:34:35 MDTNo reproduction or networking permi
36、tted without license from IHS -,-,- BS EN 4468:2007 BSI Group Headquarters 389 Chiswick High Road, London W4 4AL, UK Tel +44 (0)20 8996 9001 Fax +44 (0)20 8996 7001 British Standards Institute (BSI) BSI is the independent national body responsible for preparing British Standards. It presents the UK
37、 view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improv
38、e the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000 Fa
39、x: +44 (0)20 8996 7400 BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services.
40、Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001 Email: You may also buy directly using a debit/credit card from the BSI Shop on the Website http:/ In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Stan
41、dards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on
42、 all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other be
43、nefits contact Membership Administration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via British Standards Online can be found at http:/ Further information about BSI is available on the BSI website at http:/. Copyright Copyrigh
44、t subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or
45、 by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for a
46、ny other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070 Email: Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 20:34:35 MDTNo reproduction or networking permitted without license from IHS -,-,-