《BS-EN-4465-2007.pdf》由会员分享，可在线阅读，更多相关《BS-EN-4465-2007.pdf（10页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 4465:2007 Aerospace series Steel FE-PM1506 (X5CrNiMoAl13-8-2) Vacuum induction melted and consumable electrode remelted Solution treated and precipitation treated Forgings a or D u u 150 mm Rm W W 1 300 MPa ICS 49.025.10 ? Copyright British Standards Institution Provided by IH
2、S under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 20:34:29 MDTNo reproduction or networking permitted without license from IHS -,-,- BS EN 4465:2007 This British Standard was published under the authority of the Standards Policy and Strategy Commit
3、tee on 30 June 2008 BSI 2008 ISBN 978 0 580 61228 2 National foreword This British Standard is the UK implementation of EN 4465:2007. The UK participation in its preparation was entrusted by Technical Committee ACE/61, Metallic materials for aerospace purposes, to Panel ACE/61/-/15, Steels. A list o
4、f organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal
5、obligations. Amendments/corrigenda issued since publication DateComments Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 20:34:29 MDTNo reproduction or networking permitted without license fro
6、m IHS -,-,- EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4465 July 2007 ICS 49.025.10 English Version Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D 150 mm - Rm
7、 1 300 MPa Srie arospatiale - Acier FE-PM1506 (X5CrNiMoAl13-8-2) - labor sous vide par induction et refondu llectrode consommable - Mis en solution et vieilli - Pices forges et pices matrices - a ou D 150 mm - Rm 1 300 MPa Luft- und Raumfahrt - Stahl FE-PM1506 (X5CrNiMoAl13-8- 2) - Vakuuminduktionse
8、rschmolzen und mit selbstverzehrender Elektrode umgeschmolzen - Lsungsgeglht und ausgelagert - Schmiedestcke - a oder D 150 mm - Rm 1 300 MPa This European Standard was approved by CEN on 15 February 2007. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the
9、conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in
10、 three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies
11、 of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROP
12、EAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4465:2007: E Copyright Brit
13、ish Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 20:34:29 MDTNo reproduction or networking permitted without license from IHS -,-,- 2 Foreword This document (EN 4465:2007) has been prepared by the Aerospace
14、and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to i
15、ts presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2008, and conflicting national standards shall be withdrawn at the latest by January 2008. Attention is drawn to the
16、 possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countr
17、ies are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain
18、, Sweden, Switzerland and the United Kingdom. BS EN 4465:2007 Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 20:34:29 MDTNo reproduction or networking permitted without license from IHS -,-,-
19、 3 Introduction This standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258. This standard has been prepared in accordance with EN 4500-5. 1 Scope This standard specifies the requirements relating t
20、o: Steel FE-PM1506 (X5CrNiMoAl13-8-2) Vacuum induction melted and consumable electrode remelted Solution treated and precipitation treated Forgings a or D 150 mm Rm 1 300 MPa for aerospace applications. 2 Normative references The following referenced documents are indispensable for the application o
21、f this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 4258, Aerospace series Metallic materials General organization of standardization Links between types of EN standards an
22、d their use. EN 4347, Aerospace series Steel FE-PM1506 (X3CrNiMoAl13-8-2) Vacuum induction melted and consumable electrode remelted Softened Forging stock a or D 300 mm. 1) EN 4500-5, Aerospace series Metallic materials Rules for drafting and presentation of material standards Part 5: Specific rules
23、 for steels. 1) EN 4700-6, Aerospace series Steel and heat resisting alloys Wrought products Technical specification Part 6: Pre-production and production forgings. 2) 1) Published as ASD Prestandard at the date of publication of this standard. 2) In preparation at the date of publication of this st
24、andard. BS EN 4465:2007 Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 20:34:29 MDTNo reproduction or networking permitted without license from IHS -,-,- 4 1 Material designation Steel FE-PM1
25、506 (X5CrNiMoAl13-8-2) Element C Si Mn P S Cr Mo Ni Al Ti N2 Fe min. 12,25 2,00 7,50 0,8 2 Chemical composition % max. 0,05 0,10 0,10 0,010 0,005 13,25 2,50 8,50 1,10 0,50 0,010 Base 3 Method of melting Vacuum induction melted and consumable electrode remelted 4.1 Form Forgings 4.2 Method of product
26、ion Forged from forging stock EN 4347 4.3 Limit dimension(s) mm a or D 150 5 Technical specification EN 4700-6 Delivery condition Solution treated Solution treated and precipitation treated 6.1 Heat treatment 830 C 930 C / OQ, AQ or WQ + cooling to 20 C 830 C 930 C / OQ, AQ or WQ + cooling to 20 C +
27、 530 C 550 C / t 4 h / AC 6.2 Delivery condition code W U Use condition Solution treated and precipitation treated Delivery condition 7 Heat treatment Solution treated + 530 C 550 C / t 4 h / AC Characteristics 8.1 Test sample(s) See EN 4700-6. 8.2 Test piece(s) See EN 4700-6. 8.3 Heat treatment Del
28、ivery condition Use condition 9 Dimensions concerned mm a or D 150 a or D 150 a 75 a or D 150 10 Thickness of cladding on each face % 11 Direction of test piece L T 12 Temperature C Ambient Ambient 13 Proof stress Rp0,2 MPa 1 200 1 200 14 Strength Rm MPa 1 300 1 300 15 Elongation A % 11 9 16 T Reduc
29、tion of area Z % 50 45 17 Hardness 363 HB 380 HB 380 HB 18 Shear strength Rc MPa 19 Bending k 20 Impact strength KV 50 J ; Notch direction T + KV 20 J, at 40 C ; Notch direction T KV 40 J ; Notch direction L + KV 15 J, at 40 C ; Notch direction L 21 Temperature C 22 Time h 23 Stress a MPa 24 Elongat
30、ion a % 25 Rupture stress R MPa 26 C Elongation at rupture A % 27 Notes (see line 98) a BS EN 4465:2007 Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 20:34:29 MDTNo reproduction or networkin
31、g permitted without license from IHS -,-,- 5 34 Grain size See EN 4700-6. 7 G 6 44 External defects See EN 4700-6. 61 Internal defects See EN 4700-6. 7 Class 5 82 Batch uniformity See EN 4700-6. 95 Marking inspection See EN 4700-6. 96 Dimensional inspection See EN 4700-6. 98 Notes a 75 mm a or D 150
32、 mm may be tested in L or T direction. 99 Typical use BS EN 4465:2007 Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 20:34:29 MDTNo reproduction or networking permitted without license from I
33、HS -,-,- 6 100 Product qualification Qualification programme to be agreed between manufacturer and purchaser. BS EN 4465:2007 Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 20:34:29 MDTNo rep
34、roduction or networking permitted without license from IHS -,-,- blank Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 20:34:29 MDTNo reproduction or networking permitted without license from
35、IHS -,-,- BS EN 4465:2007 BSI Group Headquarters 389 Chiswick High Road, London W4 4AL, UK Tel +44 (0)20 8996 9001 Fax +44 (0)20 8996 7001 British Standards Institute (BSI) BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Euro
36、pe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our produ
37、cts and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000 Fax: +44 (0)20 8996 7400 BSI
38、 offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001 F
39、ax: +44 (0)20 8996 7001 Email: You may also buy directly using a debit/credit card from the BSI Shop on the Website http:/ In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise re
40、quested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and serv
41、ices. Contact the Information Centre. Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership
42、Administration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via British Standards Online can be found at http:/ Further information about BSI is available on the BSI website at http:/. Copyright Copyright subsists in all BSI publ
43、ications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic,
44、photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than impl
45、ementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070 Email: Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 20:34:29 MDTNo reproduction or networking permitted without license from IHS -,-,-