《BS-EN-60264-3-1-1996 IEC-60264-3-1-1989.pdf》由会员分享,可在线阅读,更多相关《BS-EN-60264-3-1-1996 IEC-60264-3-1-1989.pdf(10页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60264-3-1:1996 IEC 264-3-1: 1989 Incorporating Amendment No. 1 BS 7584-3.1:1992 renumbered Packaging of winding wires Part 3: Taper barrelled delivery spools Section 3.1 Basic dimensions The European Standard EN 60264-3-1:1994 has the status of a British Standard Licensed Copy
2、: sheffieldun sheffieldun, na, Mon Nov 13 13:31:25 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60264-3-1:1996 This British Standard, having been prepared under the direction of the Cables and Insulation Standards Policy Committee, was published under the authority of the Standards Board and com
3、es into effect on 15 August 1992 BSI 01-2000 The following BSI references relate to the work on this standard: Committee reference CIL/55 Draft announced in BSI News May 1992 ISBN 0 580 21029 4 Committees responsible for this British Standard The preparation of this British Standard was entrusted by
4、 the Cables and Insulation Standards Policy Committee (CIL/-) to Technical Committee CIL/55, upon which the following bodies were represented: British Cable Makers Confederation British Non-ferrous Metals Federation British Railways Board Covered Conductors Association EEA (the Association of Electr
5、onics, Telecommunications and Business Equipment Industries) Electrical and Electronic Insulation Association Electronic Components Industry Federation Transmission and Distribution Association (BEAMA Ltd.) Amendments issued since publication Amd. No.DateComments 9061May 1996Indicated by a sideline
6、in the margin Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 13:31:25 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60264-3-1:1996 BSI 01-2000i Contents Page Committees responsibleInside front cover National forewordii Foreword2 1Scope3 2Object3 3Dimensions3 4Material4 Annex ZA (normative
7、) Other international publications quoted in this standard with the references of the relevant European publicationsInside back cover Figure 1 Taper barrelled delivery spool4 Table I3 Table II3 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 13:31:25 GMT+00:00 2006, Uncontrolled Copy, (c) BSI
8、 BS EN 60264-3-1:1996 ii BSI 01-2000 National foreword This British Standard has been prepared by Technical Committee GEL/55 (formerly CIL/55) and is the English language version of EN 60264-3-1:1994 Packaging of winding wires Part 3: Taper barrelled delivery spools Section 1: Basic dimensions, publ
9、ished by the European Committee for Electrotechnical Standardization (CENELEC). It is identical with IEC 264-3-1:1989 published by the International Electrotechnical Commission (IEC). BS EN 60264, of which there are four Parts, deals with the packaging of winding wires. Part 1 covers containers, Par
10、t 2 covers cylindrical barrelled delivery spools, Part 3 covers taper barrelled delivery spools and Part 4 covers methods of test. This British Standard is one of a series dealing with insulated wires used for windings in electrical equipment, which comprises the following three groups. IEC 851, Met
11、hods of test for winding wires. IEC 317, Specifications for particular types of winding wires. IEC 264, Packaging of winding wires. NOTEBS 6811 Winding wires Part 0:1993 General introduction and list of Parts lists the various Sections of BS 6811 and BS 7584 against the corresponding Parts of the IE
12、C standards listed above. Some or all of these IEC standards will be adopted as BS ENs in due course and the relevant Parts of BS 6811 and BS 7584 will be renumbered as BS ENs. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are r
13、esponsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 4, an inside back cover and a back cove
14、r. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 13:31:25 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME
15、 EUROPENNE EUROPISCHE NORM EN 60264-3-1 December 1994 UDC 621.798.114-036:621.315.337.4 ICS 55.060 Supersedes HD 46.3.1 S1:1990 Descriptors: Winding, electric wire, insulated wire, delivery, spool, taper barrel, packaging, dimension English version Packaging of winding wires Part 3: Taper barrelled
16、delivery spools Section 1: Basic dimensions (IEC 264-3-1:1989) Conditionnement des fils de bobinage Troisime partie: Bobines de livraison ft de forme conique Section 1: Dimensions de base (CEI 264-3-1:1989) Verpackung von Wickeldrhten Teil 3: Lieferspulen mit konischem Kern Hauptabschnitt 1: Mae (IE
17、C 264-3-1:1989) This European Standard was approved by CENELEC on 1994-10-04. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and
18、bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsi
19、bility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Net
20、herlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1994 Co
21、pyright reserved to CENELEC members Ref. No. EN 60264-3-1:1994 E Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 13:31:25 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60264-3-1:1994 BSI 01-2000 2 Foreword The text of the International Standard IEC 264-3-1:1989, prepared by IEC TC 55, Winding
22、 wires, was approved by CENELEC as HD 46.3.1 S1 on 1990-05-01. This Harmonization Document was submitted to the formal vote for conversion into a European Standard and was approved by CENELEC as EN 60264-3-1 on 1994-10-04. The following date was fixed: Annexes designated “normative” are part of the
23、body of the standard. In this standard, Annex ZA is normative. Annex ZA is added by CENELEC. latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement(dop) 1995-10-15 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 1
24、3:31:25 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60264-3-1:1994 BSI 01-20003 1 Scope This standard specifies the basic dimensions for taper barrelled delivery spools for winding wires. 2 Object To standardize the dimensions of taper barrelled delivery spools. 3 Dimensions The dimensions and tol
25、erances for taper barrelled delivery spools are given in Table I and Table II in accordance with Figure 1. Table I lists preferred spools. For special applications, spool types given in Table II can be used. NOTEFigure 1 is given to identify the dimensions specified and is not intended to show any p
26、articular construction. Table I Table II NOTEThe datum face shall be agreed between supplier and purchaser. Spool type Dimensions (mm) d1d2d3d4 l1 max. l2 t1 s1 max. zy Nom.Tol. 250/4002501602361404003351532.50.60.4 315/5003152003001805004252037.51.00.6 400/63040025037522463053030502.01.0 Spool type
27、 Dimensions (mm) d1d2d3d4 l1 max. l2 t1 s1 max. zy Nom.Tol. 500/80050031547528080067030652.51.5 630/1 0006304006003551 00085030753.02.0 +0.5 0 +0.8 0 +1.0 0 +1.5 0 +2.0 0 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 13:31:25 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60264-3-1:1994 4 BS
28、I 01-2000 4 Material Requirements are to be stated in the purchasers order. Figure 1 Taper barrelled delivery spool Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 13:31:25 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60264-3-1:1994 BSI 01-2000 Annex ZA (normative) Other international public
29、ations quoted in this standard with the references of the relevant European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed h
30、ereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. NOTEWhen the international publi
31、cation has been modified by CENELEC common modifications, indicated by (mod), the relevant EN/HD applies. IEC publicationDateTitleEN/HDDate 182Basic dimensions of winding wires 264seriesPackaging of winding wiresEN 60264series 317seriesSpecifications for particular types of winding wires HD 555 EN 6
32、0317 series 851seriesMethods of test for winding wiresHD 490 EN 60851 series Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 13:31:25 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60264-3-1:1996 IEC 264-3-1: 1989 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BS
33、I is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make
34、 sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee resp
35、onsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, int
36、ernational and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwis
37、e requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and
38、services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration
39、. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced
40、, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type
41、or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070. Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 13:31:25 GMT+00:00 2006, Uncontrolled Copy, (c) BSI