《BS-EN-60870-6-702-1999 IEC-60870-6-702-1998.pdf》由会员分享，可在线阅读，更多相关《BS-EN-60870-6-702-1999 IEC-60870-6-702-1998.pdf（32页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60870-6-702: 1999 IEC 60870-6-702: 1998 Telecontrol equipment and systems Part 6-702: Telecontrol protocols compatible with ISO standards and ITU-T recommendations Functional profile for providing the TASE.2 application service in end systems The European Standard EN 60870-6-7
2、02:1998 has the status of a British Standard ICS 33.200 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 13:05:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60870-6-702:1999 This British Standard, having been prepared under the direction of the Electrotechnical Sector Committee, was publ
3、ished under the authority of the Standards Committee and comes into effect on 15 January 1999 BSI 05-1999 ISBN 0 580 30897 9 National foreword This British Standard is the English language version of EN 60870-6-702:1998. It is identical with IEC 60870-6-702:1998. The UK participation in its preparat
4、ion was entrusted to Technical Committee PEL/57, Power system control and communications, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK i
5、nterests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60000 added to the old number. For in
6、stance, IEC 27-1 has been renumbered as IEC 60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references Attention is drawn to the fact that CEN and CENELEC standards normally include an annex wh
7、ich lists normative references to international publications with their corresponding European publications. The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International
8、 Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British
9、Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 26 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorp
10、orated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 13:05:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60870-6-702:1999 BSI 05-1999i Contents Page Natio
11、nal forewordInside front cover Foreword2 Text of EN 60870-6-7025 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 13:05:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 13:05:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STA
12、NDARD NORME EUROPENNE EUROPISCHE NORM EN 60870-6-702 November 1998 ICS 33.200 Descriptors: Open Systems Interconnection, telecontrol, application service element, functional profile, end system English version Telecontrol equipment and systems Part 6-702: Telecontrol protocols compatible with ISO st
13、andards and ITU-T recommendations Functional profile for providing the TASE.2 application service in end systems (IEC 60870-6-702:1998) Matriels et systmes de tlconduite Partie 6-702: Protocoles de tlconduite compatibles avec les normes ISO et les recommandations de lUIT-T Profil fonctionnel pour fo
14、urnir le service dapplication TASE.2 dans les systmes finals (CEI 60870-6-702:1998) Fernwirkeinrichtungen und systeme Teil 6-702: Fernwirkprotokolle, die mit ISO-Normen und ITU-T-Empfehlungen kompatibel sind Funktionsprofil fr den TASE.2 Anwendungsdienst in Endsystemen (IEC 60870-6-702:1998) This Eu
15、ropean Standard was approved by CENELEC on 1998-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical referen
16、ces concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC mem
17、ber into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherland
18、s, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1998 CENELEC A
19、ll rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60870-6-702:1998 E Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 13:05:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60870-6-702:1998 BSI 05-1999 2 Foreword The text of document 57/
20、368/FDIS, future edition 1 of IEC 60870-6-702, prepared by IEC TC 57, Power system control and associated communications, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60870-6-702 on 1998-10-01. The following dates were fixed: Annexes designated “normative” are par
21、t of the body of the standard. Annexes designated “informative” are given for information only. In this standard, Annex A and Annex ZA are normative and Annex B and Annex C are informative. Annex ZA has been added by CENELEC. Endorsement notice The text of the International Standard IEC 60870-6-702:
22、1998 was approved by CENELEC as a European Standard without any modification. In the official version, for Annex C, Bibliography, the following note has to be added for the standard indicated: IEC 60870-6-802, NOTEHarmonized as EN 60870-6-802:1997 (not modified). Contents Page Foreword2 Introduction
23、5 1Scope5 2Normative references6 3Definitions6 4Abbreviations6 5Profile protocol stacks6 6Conformance requirements6 6.1TASE.2 requirements6 6.2MMS requirements6 6.3Upper layers requirements6 Annex A (normative) ISPICS requirements lists7 A.1General7 A.2Classification of requirements7 A.2.1Base colum
24、n7 A.2.2F/S column7 A.2.3Status column8 A.2.4Profile column8 A.3TASE.28 A.4MMS14 A.4.1Supported MMS PDUs14 A.4.2PDU-specific requirements19 A.5ACSE19 A.5.1Supported functions19 A.5.2Initiator/responder capability20 A.5.3Supported APDUs21 A.5.4Supported APDU parameters21 A.5.5Supported parameter form
25、s22 A.6Presentation23 A.7Session24 Annex B (informative) Future developments25 Annex C (informative) Bibliography25 Annex ZA (normative) Normative references to international publications with their corresponding European publications26 Figure 1 Applicability of functional profile5 Table A.1 Client/
26、Server capability8 Table A.2 TASE.2 CBBs9 Table A.3 Association management9 Table A.4 Data value9 Table A.5 Data sets10 Table A.6 Accounts10 Table A.7 DS transfer sets11 latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorse
27、ment(dop) 1999-07-01 latest date by which the national standards conflicting with the EN have to be withdrawn(dow) 2001-07-01 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 13:05:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60870-6-702:1998 BSI 05-19993 Page Table A.8 Time series transfe
28、r set objects11 Table A.9 Transfer account transfer set objects12 Table A.10 Information message objects12 Table A.11 Special transfer set objects12 Table A.12 SBO devices13 Table A.13 Programs13 Table A.14 Event enrollments13 Table A.15 Event conditions13 Table A.16 Object models14 Table A.17 Envir
29、onment and general management14 Table A.18 MMS modifiers15 Table A.19 Parameter CBBs15 Table A.20 VMD support16 Table A.21 Domain management16 Table A.22 Program invocation management16 Table A.23 Variable access17 Table A.24 Semaphore management17 Table A.25 Operator communication17 Table A.26 Even
30、t management18 Table A.27 Journal management18 Table A.28 File access18 Table A.29 File management19 Table A.30 Data exchange management19 Table A.31 Additional PDUs19 Table A.32 Protocol versions19 Table A.33 Other protocol versions19 Table A.34 Technical corrigenda implemented19 Table A.35 Global
31、statement of conformance20 Table A.36 Protocol mechanisms20 Table A.37 Association establishment procedure20 Table A.38 Normal release procedure20 Table A.39 Abnormal release procedure20 Table A.40 Functional units20 Table A.41 Supported APDUs21 Table A.42 A-associate-request APDU21 Table A.43 A-ass
32、ociate-response APDU21 Table A.44 A-release-request APDU22 Table A.45 A-release-response APDU22 Table A.46 Abort APDU22 Table A.47 AE title syntax name-form22 Page Table A.48 Authentication value form22 Table A.49 Presentation PRL23 Table A.50 Session PRL24 Licensed Copy: sheffieldun sheffieldun, na
33、, Sat Nov 11 13:05:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 4 blank Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 13:05:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60870-6-702:1998 BSI 05-19995 Introduction This part of IEC 60870 is one of the IEC 60870-6 series defining functiona
34、l profiles to be used in telecommunication networks for electric power systems. It is largely based on existing ISO/IEC International Standards and International Standardized Profiles (ISP). The notion of functional profiles is fundamental in the organization of the IEC 60870-6 series. A description
35、 of functional profiles, their classification scheme and the manner of defining them are laid down in IEC 60870-6-1. This profile for telecontrol application service element (TASE.2, also known as inter-control centre communications protocol, ICCP) is an application-class profile (A-profile) providi
36、ng communications capabilities to control centre applications. The TASE.2 in the application layer is specified in IEC 60870-6-503. The present standard refines the application layer protocol to meet interoperability requirements and specifies requirements on the presentation and session layers supp
37、ort for TASE.2. TASE.2 operates in a connection mode, so this A-profile needs to interface to a transport-class profile of the T-profile variety. Since the TASE.2 is an MMS-based protocol, this functional profile (FP) is based on MMS profiles. In the OSI international standardized profile taxonomy t
38、here is a category for MMS A-profiles. The present standard makes frequent use of the AMM11 profile. 1 Scope This part of IEC 60870 is a functional profile (FP) and defines the provision of the TASE.2 communications services between two control centre end systems. It is supported by the transport se
39、rvices implemented in accordance with transport-profiles defined for the type of network that interconnects the control centre end systems. This is demonstrated in Figure 1. This FP also defines the provision of the OSI connection-mode presentation and session services between the end systems. ISO/I
40、SP 14226 specifies the AMM11 profiles for MMS. The parts of ISO/ISP 14226 that cover the profile that are used as a basis for this FP are ISO/ISP 14226-1 and ISO/ISP 14226-2. This FP is in alignment with ISO/ISP 14226, as far as possible, and maintains this compatibility by reference. There are TASE
41、.2 requirements in addition to ISO/ISP 14226. These requirements are specified in this FP. Figure 1 Applicability of functional profile Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 13:05:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60870-6-702:1998 6 BSI 05-1999 2 Normative references
42、The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of IEC 60870. At the time of publication, the editions indicated were valid. All normative documents are subject to revision, and parties to agreements based on this part of
43、 IEC 60870 are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. IEC 60870-6-503:1997, Telecontrol equipment and systems Part 6: Telecontrol
44、protocols compatible with ISO standards and ITU-T recommendations Section 503:TASE.2 Services and protocol. ISO/IEC 8327-2:1996, Information technologies Open Systems interconnection Connection-oriented session protocol Part 2: Protocol implementation conformance statement (PICS) proforma. ISO/IEC 8
45、650-2:1997, Information technology Open Systems Interconnection Protocol specification for the Association Control Service Element Part 2: Protocol Implementation Conformance Statement (PICS) proforma. ISO/IEC 8823-2:1997, Information technology Open Systems Interconnection Connection-oriented prese
46、ntation protocol Part 2: Protocol Implementation Conformance Statement (PICS) Proforma. ISO/ISP 14226-1:1996, Industrial automation systems International Standardized Profile AMM11: MMS General Applications Base Profile Part 1: Specification of ACSE, Presentation and Session protocols for the use by
47、 MMS. ISO/ISP 14226-2:1996, Industrial automation systems International Standardized Profile AMM11: MMS General Applications Base Profile Part 2: Common MMS requirements. 3 Definitions All the terms used in this standard are as defined in the above-referenced standards. 4 Abbreviations All the abbre
48、viations used in this standard are as defined in the above-referenced standards. 5 Profile protocol stacks As shown in Figure 1, the TASE.2 profile includes the TASE.2, MMS and ACSE elements in the TASE.2 protocol, the connection-mode presentation protocol, and the connection-mode session protocol.
49、6 Conformance requirements The TASE.2 application profile can be referred to as a TASE.2 MMS application profile. It shall follow the same rules and regulations governing MMS ISPs. Requirements of the TASE.2 MMS application profile to support TASE.2 are separated into upper layer requirements, MMS requirements, and TASE.2 requirements. The ISPICS requirements lists for TASE.2, MMS, ACSE, presentation and session