《BS-EN-ISO-6570-2004.pdf》由会员分享，可在线阅读，更多相关《BS-EN-ISO-6570-2004.pdf（34页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 6570:2004 Incorporating Amendment No. 1 to BS ISO 6570:2001 (renumbers the BS ISO as BS EN ISO 6570:2004) Natural gas Determination of potential hydrocarbon liquid content Gravimetric methods The European Standard EN ISO 6570:2004 has the status of a British Standard ICS 7
2、5.060 ? Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:56:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 6570:2004 This British Standard, having been prepared under the direction of the Sector Policy and Strategy Committee for Materials and Chemicals, was published under the auth
3、ority of the Standards Policy and Strategy Committee on 24 April 2002 BSI 27 September 2004 ISBN 0 580 39581 2 National foreword This British Standard is the official English language version of EN ISO 6570:2004. It is identical with ISO 6570:2001. The UK participation in its preparation was entrust
4、ed to Technical Committee PTI/15, Natural gas and gas analysis, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Additional information The committee responsible for this British Standard reminds users that uncertaint
5、ies quoted with results of any analysis using these methods should follow the guidance given in PD 6461-3:1995 “Vocabulary of metrology Part 3: Guild to the expression of uncertainty in measurement”. Cross-references The British Standards which implement international or European publications referr
6、ed to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisi
7、ons of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, o
8、r proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages
9、 ii to v, a blank page, pages 1 to 21, the Annex ZA page, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments 1536827 September 2004 Implementation of the Eur
10、opean Standard Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:56:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 6570 September 2004 ICS 75.060 English version Natural gas - Determination of potential hydrocarbon liquid content - Grav
11、imetric methods (ISO 6570:2001) Gaz naturel - Dtermination de la teneur en hydrocarbures liquides potentiels - Mthodes gravimtriques (ISO 6570:2001) This European Standard was approved by CEN on 22 July 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate t
12、he conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists i
13、n three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies
14、of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR ST
15、ANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2004 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 6570:2004: E Licensed Copy: sheffieldun shef
16、fieldun, na, Sun Nov 19 15:56:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI I NESO 56:0702( 40E) 2 Foreword The text of ISO 6570:2001 has been prepared by Technical Committee ISO/TC 193 “Natural gas” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 6570:2
17、004 by CMC. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2005, and conflicting national standards shall be withdrawn at the latest by March 2005. According to the CEN/CENELEC Internal Reg
18、ulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
19、Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Endorsement notice The text of ISO 6570:2001 has been approved by CEN as EN ISO 6570:2004 without any modifications. NOTE Normative references to International Standards are listed in Annex ZA (normative). E
20、N ISO 6570:2004 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:56:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Reference number ISO 6570:2001(E) INTERNATIONAL STANDARD ISO 6570 First edition 2001-06-15 Natural gas Determination of potential hydrocarbon liquid content Gravimetric methods
21、Gaz naturel Dtermination de la teneur en hydrocarbures liquides potentiels Mthodes gravimtriques EN ISO 6570:2004 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:56:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii EN ISO 6570:2004 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:5
22、6:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO 6570:2001(E) iii ContentsPage Foreword.iv Introduction.v 1Scope 1 2Normative references1 3Principle2 4Apparatus requirements .2 4.1Measurement installation2 4.2Check for correct installation operation .5 5Sampling.10 5.1General10 5.2Sampling condit
23、ions .10 5.3Sample line.10 5.4Direct sampling10 5.5Indirect sampling.10 6Procedure.11 6.1Determination of potential hydrocarbon liquid content11 6.2Determination of water formation12 7Expression of results 12 7.1Method A Manual weighing method12 7.2Method B Indirect automatic method14 8Uncertainty o
24、f measurement15 8.1Achievable uncertainty .15 8.2Gas leakage15 8.3Bath liquid 16 8.4Wet gas.16 8.5Condensate leakage16 8.6Variations in bath temperature and pressure in the gas/liquid cyclone separator 16 8.7Premature condensation.16 9Test report16 Annex A (informative) Selection of measurement temp
25、erature and pressure17 Annex B (informative) Examples of the line-up of the apparatus 18 Annex C (informative) Example of calibration of the differential pressure gauge for the indirect automatic method Method B19 Annex D (informative) Example of an indirect automatic measurement Method B.21 1002:07
26、56 OSIEN ISO 6570:2004 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:56:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO 6570:2001(E) iv Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work
27、 of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmen
28、tal, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft
29、International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this Interna
30、tional Standard may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. International Standard ISO 6570 was prepared by Technical Committee ISO/TC 193, Natural gas, Subcommittee SC 1, Analysis of natural gas. This first edition cancels an
31、d replaces ISO 6570-1:1983 and ISO 6570-2:1984, which have been technically revised. Annexes A to D of this International Standard are given for information only. 1002:0756 OSIEN ISO 6570:2004 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:56:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI
32、ISO 6570:2001(E) v Introduction Under certain conditions, higher hydrocarbons present in natural gas or similar gases may condense and the condensate formed can cause difficulties in the operation of gas transport and distribution systems. Dew-point measurements, by condensation on a mirror, may giv
33、e an indication of the conditions under which condensation starts. However, these measurements give no further information about the amount of liquid to be expected under operating conditions. For proper operation of transport and distribution systems, a knowledge of the quantities of condensate for
34、med as a function of temperature and pressure is required. This knowledge is also required for the design of production and treatment systems as well as for subsequent handling and disposal of the liquid. The methods described in this International Standard are intended for the determination of the
35、quantity of hydrocarbon condensate formed from a natural gas or similar gas as a function of the temperature and pressure of the gas. Instruments based on different measurement principles can give a figure related to potential condensate content or dew point. The dew point can only be determined by
36、performing measurements at different temperatures followed by extrapolation of the measurements to a potential hydrocarbon liquid content (?PHLC) value of zero. The methods described in this International Standard can be used to calibrate such instruments. 1002:0756 OSIEN ISO 6570:2004 Licensed Copy
37、: sheffieldun sheffieldun, na, Sun Nov 19 15:56:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 6570:2004 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:56:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI INTENRATIONAL TSANDADRISO 6570:2001(E) ISO 1002 All rights rsedevre1 Natural gas D
38、etermination of potential hydrocarbon liquid content Gravimetric methods WARNING The use of this International Standard may involve hazardous materials, operations and equipment. This International Standard does not purport to address all of the safety problems associated with its use. It is the res
39、ponsibility of the user of this International Standard to establish appropriate safety and health practices and to determine the applicability or regulatory limitations prior to use. 1Scope This International Standard describes the principles of, and general requirements for, two gravimetric methods
40、 for the determination of the potential hydrocarbon liquid content of natural gas, or similar gas, at a given pressure and temperature. Two methods are specified in this International Standard to determine the amount of condensate in a sample gas: ?Method A: a manual weighing method; ?Method B: an i
41、ndirect automatic weighing method based on the indication of the pressure difference caused by the accumulation of condensate in a vertical tube. The manual weighing method is a reference method for the indirect automatic method (Method B). The indirect automatic method (Method B) is suitable for se
42、mi-continuous control. NOTEUnless otherwise specified, gas volumes are in cubic metres at 273,15 K and 101,325 kPa. 2Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated refere
43、nces, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated refe
44、rences, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. ISO 6976:1995, Natural gas Calculation of calorific values, density, relative density and Wobbe index from composition ISO 10715:1997, Natur
45、al gas Sampling guidelines ISO 12213-1:1997, Natural gas Calculation of compression factor Part 1: Introduction and guidelines ISO 12213-2:1997, Natural gas Calculation of compression factor Part 2: Calculation using molar-composition analysis ISO 12213-3:1997, Natural gas Calculation of compression
46、 factor Part 3: Calculation using physical properties 1002:0756 OSI 1 EN ISO 6570:2004 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:56:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO 0756:(1002)E 2 ISO 1002 All rights rsedevre 3Principle Determination of the quantity of hydrocarbon co
47、ndensate which can be formed at a pressure (p) and a temperature (T) by passing a representative sample of the gas through an apparatus where it is first brought to the pressure (p) and then cooled to the temperature (T). The temperature and pressure are selected according to the specific applicatio
48、n (see annex A). Prior to reducing the pressure of the sample of gas to that required for the determination, the gas is heated, so that, after pressure reduction, the temperature is well above the dew-point temperature of the gas. Downstream of the reducer, the sample is cooled isobarically in a coo
49、ling bath to the required measurement temperature. The quantity of liquid accumulated during the measurement period is determined by either direct manual weighing of the collected liquid or weighing of the condensate cyclone separator at the start and at the end of a measurement period (Method A). Alternatively, the quantity of liquid accumulated in a vertical measuring tube may be determined automatically (indirect automatic weighing) by indication of the