《BS-EN-ISO-10366-1-2002.pdf》由会员分享，可在线阅读，更多相关《BS-EN-ISO-10366-1-2002.pdf（18页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 10366-1:2002 Incorporating Corrigendum No. 1 Plastics Methyl methacrylate-acrylonitrile- butadiene-styrene (MABS) moulding and extrusion materials Part 1: Designation system and basis for specifications The European Standard EN ISO 10366-1:2002 has the status of a British
2、Standard ICS 83.080.20 ? Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 02:38:23 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 10366-1:2002 This British Standard, having been prepared under the direction of the Materials and Chemicals Sector Policy and Strategy Committee, was publishe
3、d under the authority of the Standards Policy and Strategy Committee on 23 October 2002 BSI 5 December 2002 ISBN 0 580 40609 1 National foreword This British Standard is the official English language version of EN ISO 10366-1:2002. It is identical with ISO 10366-1:2002. It supersedes BS EN ISO 10366
4、-1:1999 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee PRI/82, Thermoplastic materials, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British S
5、tandards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.
6、This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible i
7、nternational/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the
8、EN ISO title page, the EN ISO foreword page, the ISO title page, pages ii and iii, a blank page, pages 1 to 8, the Annex ZA page and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments
9、14255 Corrigendum No. 1 5 December 2002 Replacing the EN ISO foreword page and incorporating the Annex ZA page Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 02:38:23 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10366-1 October 2002 ICS
10、83.080.20Supersedes EN ISO 10366-1:1999 English version Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 10366-1:2002) Plastiques - Mthylmthacrylate-acrylonitrile-butadine- styrne (MA
11、BS) pour moulage et extrusion - Partie 1: Systme de dsignation et base de spcifications (ISO 10366-1:2002) Kunststoffe - Methylmethacrylat-Acrylnitril-Butadien-Styrol (MABS)-Formmassen - Teil 1: Bezeichnungssystem und Basis fr Spezifikationen (ISO 10366-1:2002) This European Standard was approved by
12、 CEN on 25 August 2002. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standa
13、rds may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the
14、 Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and Uni
15、ted Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2002 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10366-
16、1:2002 E Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 02:38:23 GMT+00:00 2006, Uncontrolled Copy, (c) BSI CORRECTED 2002-11-13 Foreword This document (EN ISO 10366-1:2002) has been prepared by Technical Committee ISO/TC 61 “Plastics“ in collaboration with Technical Committee CEN/TC 249 “Pl
17、astics“, the secretariat of which is held by IBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2003, and conflicting national standards shall be withdrawn at the latest by April 2003. Thi
18、s document supersedes EN ISO 10366-1:1999. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland,
19、Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 10366-1:2002 has been approved by CEN as EN ISO 10366-1:2002 without any modifications. NOTE Normative references to International Standards are listed in An
20、nex ZA (normative). EN ISO 103661:2002 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 02:38:23 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Reference number ISO 10366-1:2002(E) INTERNATIONAL STANDARD ISO 10366-1 Second edition 2002-10-01 Plastics Methyl methacrylate- acrylonitrile-butadiene-st
21、yrene (MABS) moulding and extrusion materials Part 1: Designation system and basis for specifications Plastiques Mthylmthacrylate-acrylonitrile-butadine-styrne (MABS) pour moulage et extrusion Partie 1: Systme de dsignation et base de spcifications EN ISO 103661:2002 Licensed Copy: sheffieldun sheff
22、ieldun, na, Mon Nov 20 02:38:23 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 103661:2002 ii Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 02:38:23 GMT+00:00 2006, Uncontrolled Copy, (c) BSI IS-66301 O1:(2002E) I SO 2002 All irthgs ersedevr iii Foreword ISO (the International Organizati
23、on for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established ha
24、s the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Inte
25、rnational Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publica
26、tion as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this part of ISO 10366 may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such p
27、atent rights. ISO 10366-1 was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 9, Thermoplastic materials. This second edition cancels and replaces the first edition (ISO 10366-1:1993), which has been technically revised. ISO 10366 consists of the following parts, under the gener
28、al title Plastics Methyl methacrylate-acrylonitrile- butadiene-styrene (MABS) moulding and extrusion materials: Part 1: Designation system and basis for specifications Part 2: Preparation of test specimens and determination of properties EN ISO 103661:2002 iii Licensed Copy: sheffieldun sheffieldun,
29、 na, Mon Nov 20 02:38:23 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 02:38:23 GMT+00:00 2006, Uncontrolled Copy, (c) BSI INTENRATIONAL TSANDADR IS-66301 O1:(2002E) I SO 2002 All irthgs ersedevr 1 Plastics Methyl methacrylate-acrylonitrile-butadie
30、ne-styrene (MABS) moulding and extrusion materials Part 1: Designation system and basis for specifications 1 Scope 1.1 This part of ISO 10366 establishes a system of designation for methyl methacrylate-acrylonitrile-butadiene- styrene (MABS) moulding and extrusion materials, which may be used as the
31、 basis for specifications. 1.2 The types of MABS plastic are differentiated from each other by a classification system based on appropriate levels of the designatory properties a) Vicat softening temperature b) melt volume-flow rate c) Charpy notched impact strength d) tensile modulus and on informa
32、tion about composition, intended application and/or method of processing, important properties, additives, colorants, fillers and reinforcing materials. 1.3 I This part of ISO 10366 is applicable to all methyl methacrylate-acrylonitrile-butadiene-styrene materials consisting of a continuous phase ba
33、sed mainly on copolymers of styrene (and/or an alkyl-substituted styrene), acrylonitrile and methyl methacrylate and a dispersed elastomeric phase based on butadiene. It applies to MABS materials ready for normal use in the form of powder, granules or pellets, unmodified or modified by colorants, ad
34、ditives, fillers, etc. 1.4 It is not intended to imply that materials having the same designation give necessarily the same performance. This part of ISO 10366 does not provide engineering data, performance data or data on processing conditions which may be required to specify a material for a parti
35、cular application and/or method of processing. If such additional properties are required, they shall be determined in accordance with the test methods specified in part 2 of this International Standard, if suitable. 1.5 In order to specify a thermoplastic material for a particular application or to
36、 ensure reproducible processing, additional requirements may be given in data block 5 (see 3.1). EN ISO 103661:2002 1 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 02:38:23 GMT+00:00 2006, Uncontrolled Copy, (c) BSI IS-66301 O1:(2002E) 2 I SO 2002 All irthgs ersedevr 2 Normative references
37、The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of ISO 10366. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part of I
38、SO 10366 are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International
39、 Standards. ISO 1043-1, Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics ISO 10366-2:1), Plastics Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of prop
40、erties 3 Designation system 3.1 General The designation system for thermoplastics is based on the following standard pattern: Designation Identity block Individual-item block Description block (optional) International Standard number block Data block 1 Data block 2 Data block 3 Data block 4 Data blo
41、ck 5 The designation consists of an optional description block, reading “Thermoplastics”, and an identity block comprising the International Standard number and an individual-item block. For unambiguous designation, the individual-item block is subdivided into five data blocks comprising the followi
42、ng information: Data block 1: Identification of the plastic by its abbreviated term MABS in accordance with ISO 1043-1 and information about the composition of the polymer (see 3.2). Data block 2: Position 1: Intended application and/or method of processing (see 3.3). Positions 2 to 8: Important pro
43、perties, additives and supplementary information (see 3.3). Data block 3: Designatory properties (see 3.4). Data block 4: Fillers or reinforcing materials and their nominal content (see 3.5). Data block 5: For the purpose of specifications, a fifth data block may be added containing additional infor
44、mation (see 3.6). The first character of the individual-item block shall be a hyphen. The data blocks shall be separated from each other by a comma. If a data block is not used, this shall be indicated by doubling the separation sign, i.e. by two commas (,). 1) To be published. (Revision of ISO 1036
45、6-2:1994) EN ISO 103661:2002 2 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 02:38:23 GMT+00:00 2006, Uncontrolled Copy, (c) BSI IS-66301 O1:(2002E) I SO 2002 All irthgs ersedevr 3 3.2 Data block 1 In this data block, after the hyphen, the plastic is identified by its abbreviated term (MABS
46、) in accordance with ISO 1043-1, followed by a hyphen and a single code-letter giving additional information on the composition as specified in Table 1. Table 1 Code-letters used for additional information on the composition in data block 1 Code-letter Range of AN content % by mass Range of MMA cont
47、ent % by mass A 10 but u 50 B 50 but u 80 C W 30 10 but u 50 D W 30 50 For the purposes of this part of ISO 10366, the AN content of the continuous phase shall be determined in accordance with ISO 10366-2:, Annex A. The MMA content of the compound shall be determined by measurement of the oxygen con
48、tent. EN ISO 103661:2002 3 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 20 02:38:23 GMT+00:00 2006, Uncontrolled Copy, (c) BSI IS-66301 O1:(2002E) 4 I SO 2002 All irthgs ersedevr 3.3 Data block 2 In this data block, information about intended application and/or method of processing is given i
49、n position 1 and information about important properties, additives and colour in positions 2 to 8. The code-letters used are specified in Table 2. If information is presented in positions 2 to 8 and no specific information is given in position 1, the letter X (no indication) shall be inserted in position 1. Table 2 Code-letters used in data block 2 Code-letter Position 1 Code-letter Positions 2 to 8 A Processing stabilized B Blo