《BS-EN-61076-1-1996 IEC-61076-1-1995 QC-480000.pdf》由会员分享，可在线阅读，更多相关《BS-EN-61076-1-1996 IEC-61076-1-1995 QC-480000.pdf（34页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 61076-1:1996 IEC 1076-1:1995 QC 480000:1995 Incorporating Amendments Nos. 1 and 2 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications Part 1: Generic specification The European Standard EN 61076-1:1995, with the
2、 incorporation of amendments A1:1996 and A2:2001, has the status of a British Standard ICS 31.220.10 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 08:32:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 61076-1:1996 Th
3、is British Standard, having been prepared under the direction of the Electrotechnical Sector Board, was published under the authority of the Standards Board and comes into effect on 15 June 1996 BSI 15 March 2002 The following BSI references relate to the work on this standard: Committee reference E
4、PL/48/2 Draft for comment 93/212277 DC ISBN 0 580 25299 X Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Technical Committee EPL/48, Electromechanical components for electronic equipment, to Subcommittee EPL/48/2, Connector for electron
5、ic equipment, upon which the following bodies were represented: Association of Manufacturers Allied to the Electrical and Electronics Industry (BEAMA Ltd) British Telecommunications plc Federation of the Electronics Industry Ministry of Defence National Supervising Inspectorate Society of British Ae
6、rospace Companies Limited Amendments issued since publication Amd. No.DateComments 9507July 1997 1353715 March 2002Indicated by a sideline Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 08:32:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 61076-1:1996 BSI 15 March 2002 i Contents Page C
7、ommittees responsibleInside front cover National forewordii Foreword2 Text of EN 61076-15 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 08:32:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 61076-1:1996 ii BSI 15 March 2002 National foreword This British Standard has been prepared by Su
8、bcommittee EPL/48/2, and is the English language version of EN 61076-1:1995 Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications Part 1: Generic specification Capability approval, together with corrigendum 1996 and amendments A1:1996 a
9、nd A2:2001, published by the European Committee for Electrotechnical Standardization (CENELEC). It is identical with IEC 1076-1:1995, together with the corrigendum November 1995 and amendments 1:1996 and 2:2001, published by the International Electrotechnical Commission (IEC). Cross-references The B
10、ritish Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index” or by using the “Find” facility of the BSI Standards Electronic Catalogue. A Brit
11、ish Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a fron
12、t cover, an inside front cover, pages i to ii, the EN title page, pages 2 to 28, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Sidelining in this document indicates the most recent changes by amendment. License
13、d Copy: sheffieldun sheffieldun, na, Sat Nov 11 08:32:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61076-1 October 1995 + A1 August 1996 + A2 July 2001 ICS 31.220.10 Descriptors: Connectors under quality assessment, generic specification English
14、version Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications Part 1: Generic specification (includes amendments A1:1996 and A2:2001) (IEC 1076-1:1995 + A1:1996 + A2:2001 and corrigendum: 1995) Connecteurs sous assurance de la qualit, p
15、our utlisation dans le cadre dapplications analogiques en courant continu et basse frquence et dans le cadre dapplications numriques utilisant des dbits levs pour le transfert des donnes Partie 1: Spcification gnrique (inclut les amendements A1:1996 et A2:2001) (CEI 1076-1:1995 + A1:1996 + A2:2001 e
16、t le corrigendum:1995) Gtebesttigte Steckverbinder fr Gleichspannungs-und Niederfrequenzanwendungen sowie digitale Anwendungen mit hoher bertragungsrate Teil 1: Fachgrundspezifikation (enthlt nderungen A1:1996 und A2:2001) (IEC 1076-1:1995 + A1:1996 + A2:2001 und Corrigendum:1995) This European Stan
17、dard was approved by CENELEC on 1995-09-20. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concern
18、ing such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into it
19、s own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain,
20、 Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1995 Copyright reserved to CENELEC member
21、s Ref. No. EN 61076-1:1995 + A1:1996 + A2:2001 E Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 08:32:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 61076-1:1995 BSI 15 March 2002 2 Foreword The text of document 48B/363/DIS, future edition 1 of IEC 1076-1, prepared by SC 48B, Connectors, o
22、f IEC TC 48, Electromechanical components and mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61076-1 on 1995-09-20. The following dates were fixed: Annexes designated “normative” are part of the body of the standard. I
23、n this standard, Annex A and Annex ZA are normative. Annex ZA has been added by CENELEC. Foreword to amendment A1 The text of document 48B/479/FDIS, future amendment 1 to IEC 1076-1:1995, prepared by SC 48B, Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electro
24、nic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 61076-1:1995 on 1996-07-02. The following dates were fixed: Foreword to amendment A2 The text of document 48B/1000/FDIS, future amendment 2 to IEC 61076-1:1995, prepared by SC 48B, Connect
25、ors, of IEC TC 48, Electromechanical components and mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A2 to EN 61076-1:1995 on 2001-07-01. The following dates were fixed: Contents Page Foreword2 1General informatio
26、n5 1.1Scope5 1.2General considerations relating to specifications5 1.2.1Sectional specifications5 1.2.2Blank detail specifications5 1.2.3Detail specifications6 1.2.4Conformance to different levels of compatibility6 1.3Normative references7 2Technical information8 2.1Terminology8 2.2Classification in
27、to climatic categories8 2.3Creepage and clearance distances9 2.4Current-carrying capacity9 2.5IEC type designation9 2.6Marking9 2.6.1On the connector9 2.6.2On the package9 2.7Dimensional information9 2.7.1Drawings and dimensions9 2.7.2Gauges10 latest date by which the EN has to be implemented at nat
28、ional level by publication of an identical national standard or by endorsement(dop) 1996-07-01 latest date by which the national standards conflicting with the EN have to be withdrawn(dow) 1996-07-01 latest date by which the amendment has to be implemented at national level by publication of an iden
29、tical national standard or by endorsement(dop) 1997-04-01 latest date by which the national standards conflicting with the amendment have to be withdrawn(dow) 1997-04-01 latest date by which the amendment has to be implemented at national level by publication of an identical national standard or by
30、endorsement(dop) 2002-04-01 latest date by which the national standards conflicting with the amendment have to be withdrawn(dow) 2004-07-01 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 08:32:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 61076-1:1995 BSI 15 March 2002 3 Page 3Quality ass
31、essment procedures11 3.1Quality assessment definitions11 3.1.1Primary stage of manufacture11 3.1.2Structurally similar connectors12 3.1.3System of levels12 3.1.4Certified record of released lots13 3.2Approval of manufacturers, independent test laboratories, and distributors13 3.3Qualification approv
32、al (QA)13 3.3.1General13 3.3.2Application for qualification approval13 3.3.3Granting of qualification approval14 3.3.4Extent of qualification approval14 3.3.5Maintenance of qualification approval14 3.3.6Suspension or withdrawal of qualification approval14 3.3.7Significant changes14 3.3.8Qualificatio
33、n approval testing15 3.3.9Qualification approval report15 3.4Capability approval15 3.4.1Capability documentation15 3.4.2Capability assessment procedures16 3.4.3Description of capability16 3.4.4Procedures for capability approval17 3.5Quality conformance inspection20 3.5.1Formation of inspection lots2
34、0 3.5.2Small lots and/or expensive connectors20 3.5.3Released lots20 3.5.4Quality conformance inspection groups21 3.5.5Quality conformance testing22 3.5.6In-process testing22 3.6Qualification approval/quality assessment systems22 3.6.1Qualification approval22 3.6.2Design proving or type testing23 Pa
35、ge 4Tests and test schedules23 4.1General aspects23 4.1.1Test procedures and measuring methods23 4.1.2Preconditioning23 4.1.3Wiring and mounting of specimens23 4.2Test schedules24 4.3Grouping of tests24 4.3.1Test groups for qualification approval testing24 4.3.2Inspection groups for quality conforma
36、nce inspection24 4.3.3Test groups for capability approval testing25 4.4Delayed delivery25 4.5Release for delivery, before completion of “Group B” tests25 4.6Delivery of tested connectors25 Annex A (normative) Common lettering system to be used in drawings26 Annex ZA (normative) Normative references
37、to international publications with their corresponding European publications27 Figure 1 Simplified flow chart example for capability approval18 Table 1 Climatic categories Selected values 8 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 08:32:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 4 b
38、lank Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 08:32:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 61076-1:1995 BSI 15 March 2002 5 1 General information 1.1 Scope This part of IEC 1076 establishes uniform specifications, testing requirements and quality assessment procedures for con
39、nectors. This generic specification is applicable to a family of connectors for use in electronic and electrical equipment. Connectors designed for use at radio frequencies are not covered. The quality assessment procedures are divided into qualification approval (QA) and capability approval (CA) pr
40、ocedures, of which quality conformance inspection forms a part. 1.2 General considerations relating to specifications This generic specification contains, or gives reference to, the terms, definitions, symbols, test methods and information relating to the inspection peculiar to connectors, and it al
41、so includes test sequences for quality assessment. It shall be used in conjunction with relevant levels of specifications, with reference to IEC Guide 102: sectional specifications; detail specifications, including one blank detail specification per sectional specification. In the event of conflict
42、between this generic specification and the sectional specification, the requirements of the sectional specification prevail. 1.2.1 Sectional specifications Details appropriate to a particular subfamily of connectors are contained in the relevant sectional specification, e.g. printed board, circular,
43、 rectangular connectors and other connecting devices. It shall contain a choice of all test methods and sequences, severities and preferred values for dimensions and characteristics which could be applicable to that subfamily. The contents shall be derived from the generic specification. In the even
44、t of conflict between a sectional specification and the detail specification, the requirements of the detail specification shall prevail. The following sectional specifications are under consideration or in preparation: 1.2.2 Blank detail specifications Guidance to prepare the appropriate detail spe
45、cifications shall be given in a blank detail specification, prescribing the layout to be adopted, and the information to be given, thus ensuring a uniform presentation. Its contents shall be derived from the generic or sectional specification and shall list a selection of the technical criteria nece
46、ssary and sufficient to assess quality of the subject connector subfamily. The following blank detail specifications are under consideration: IEC 1076-2: Circular connectors IEC 1076-3: Rectangular connectors IEC 1076-4: Printed board connectors IEC 1076-5: In-line socket devices IEC 1076-6: (To be
47、determined) IEC 1076-2-001: Circular connectors IEC 1076-3-001: Rectangular connectors IEC 1076-4-001: Printed board connectors IEC 1076-5-001: In-line socket devices IEC 1076-6-001: (To be determined) Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 08:32:01 GMT+00:00 2006, Uncontrolled Copy,
48、 (c) BSI EN 61076-1:1995 6 BSI 15 March 2002 1.2.3 Detail specifications Detail specifications shall give directly, or by making reference to other normative documents, all information necessary to describe a given connector or range of connectors completely, and to ensure conformance thereof with t
49、he requirements for quality assessment under the IECQ. Their contents shall be derived from the generic or sectional specification, and shall list a selection of the technical criteria necessary and sufficient to assess quality of the subject connector type, and shall be considered complete and sufficient for inspection purposes. 1.2.4 Conformance to different levels of compatibility As a function of the standardization degree, four levels characterize the compatibility of connectors from different sources. These levels