《BS-ISO-15636-2003.pdf》由会员分享，可在线阅读，更多相关《BS-ISO-15636-2003.pdf（10页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS ISO 15636:2003 Back-up pads for vulcanized fibre discs ICS 25.100.70 ? Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 08:29:48 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO 15636:2003 This British Standard was published under the authority of the Standards Policy and
2、Strategy Committee on 6 October 2003 BSI 6 October 2003 ISBN 0 580 42689 0 National foreword This British Standard reproduces verbatim ISO 15636:2003 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee MTE/13, Grinding wheels, a
3、brasive tools, paper, cloths and powder, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found in
4、the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsibl
5、e for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK
6、 interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii and iii, a blank page, pages 1 to 3 and a back cover. The BSI copyright date display
7、ed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 08:29:48 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Reference number ISO 15636:2003(E) OSI 3002 INTERNATIONAL STANDARD ISO
8、 15636 First edition 2003-09-01 Back-up pads for vulcanized fibre discs Plateaux dappui pour disques en fibres vulcanises BS ISO 15636:2003 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 08:29:48 GMT+00:00 2006, Uncontrolled Copy, (c) BSI IS:63651 O3002(E) DPlcsid Fremia ihTs PDF file mya ct
9、noian emdebt dedyfepcaes. In ccacnadrow eitA hebods licnesilop gnic,y tihs file mirp eb yatnde iv roweb detu slahl ton ide ebtlnu deess teh typfecaes wihce era hml era deddebicsnede ti dna onstlalde t noeh comuptfrep reromign tide ehtin.g In wodlnidaot gnihs fil,e trapise atpecc tiereht nser ehnopsi
10、iblity fo nto ifnriigngn Aebods licnesilop gnic.y ehT ISO tneClar Secrteirata caceptl on siibality in this .aera Ai ebods a tedarmfo kra Aebod SystemI snctaropro.de teDials fo teh sfotwcudorp erats sut deo crtaee tihs PDF file cna f ebi dnuon tlareneG eh Ifnler oatit evt oeh file; tP ehDc-Frtaeino m
11、arapterew stpo ereimizde fro irptni.gn Evyre cera neeb sah takne tsne oeru taht teh file is siutlbae fosu re yb ISO memdob rebeis. In tlnu ehikletneve y ttah lborp aem lertait gno it is f,dnuo plsaee ifnrom ttneC ehlar Secterirata ta teh serddaig sleb nevwo. ISO 3002 All irthgs erse.devr lnUeto sswr
12、ehise specified, on trap fo this lbupictaion maeb y cudorperro de tuilizi den yna form ro na ybm ynae,s lecetrinoc ro mceinahcla, incliduntohp gcoiypodna gn micrfoilm, wittuoh repmissii now nritign from ietI rehSa Ot tsserdda eh ebolw or ISOs memreb i ydobn the cnuotfo yr ttseuqer ehe.r ISO cirypoth
13、g fofice saCe tsopale 65 eneG 1121-HC 02 av leT. 4 + 10 947 22 1 11 xaF0 947 22 14 + 9 74 E-mial coirypthgis.o gro We bwww.is.o gro ii ISO 3002 Allr ihgtsser edevr BS ISO 15636:2003 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 08:29:48 GMT+00:00 2006, Uncontrolled Copy, (c) BSI IS:63651 O3
14、002(E) I SO 3002 All irhgts seredevr iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member b
15、ody interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electro
16、technical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted
17、by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent r
18、ights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 15636 was prepared by Technical Committee ISO/TC 29, Small tools, Subcommittee SC 5, Grinding wheels and abrasives. BS ISO 15636:2003 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 08:29:48 GMT+00:00
19、2006, Uncontrolled Copy, (c) BSI blank BS ISO 15636:2003 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 08:29:48 GMT+00:00 2006, Uncontrolled Copy, (c) BSI INTENRATIONAL TSANDADR IS:63651 O3002(E) I SO 3002 All irhgts seredevr 1 Back-up pads for vulcanized fibre discs 1 Scope This Internatio
20、nal Standard specifies the design and dimensions of back-up pads intended for the fixing or clamping of vulcanized fibre discs in accordance with ISO 16057, or comparable grinding tools on hand-held grinding machines, e.g. angle grinders. The connecting dimensions of support discs and clamping units
21、 are matched for spindle ends with the common practice of this kind of hand-held machine. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition
22、 of the referenced document (including any amendments) applies. ISO 16057, Coated abrasives Vulcanized fibre discs 3 Design and dimensions 3.1 Design See Figures 1 and 2. Dimensions in millimetres Figure 1 Clamping nut BS ISO 15636:2003 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 08:29:48
23、 GMT+00:00 2006, Uncontrolled Copy, (c) BSI IS:63651 O3002(E) 2 I SO 3002 All irhgts seredevr Figure 2 Back-up pad 3.2 Dimensions See Table 1. Table 1 Dimensions of back-up pads and nuts Dimensions in millimetres Vulcanized fibre discs a Back-up pads Nuts D d1 d2 d8 h1 h2 h3 d3 d4 Thread (d5) d6 d7
24、h4 1 5 ,0 0 + H11 0,4 0,4 min. 0,2 0 3 ,0 0,1 H12 16 10 16 40 16 M10 20 4,5 14 M14 100 1,5 92,5 22 5/8“ 20 14,5 1,5 45 22 5/8 UNC 35 5,8 14 M14 115 1,5 107,5 22 5/8“ 20 14,5 2 45 22 5/8 UNC 35 5,8 14 2 45 M14 125 117 22 5/8“ 14,5 5/8 UNC 35 5,8 14 M14 150 142 22 5/8“ 5/8 UNC 14 M14 22 5/8“ 12 22 5/8
25、 UNC180 172 40 14 14,5 40 M14 14 M14 235 2 227 22 5/8“ 20 12 2,5 55 22 5/8 UNC 35 5,8 h4 h2 h3 a In accordance with ISO 16057. BS ISO 15636:2003 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 08:29:48 GMT+00:00 2006, Uncontrolled Copy, (c) BSI IS:63651 O3002(E) I SO 3002 All irhgts seredevr
26、3 4 Requirements 4.1 Material 4.1.1 Back-up pad The back-up pad shall be of polymer, the type of which shall be determined at the manufacturers discretion. 4.1.2 Clamping nut The clamping nut material shall be established at the manufacturers discretion. 4.2 Scope of delivery The scope of delivery c
27、omprises back-up pads and appropriated clamping nut. 5 Designation A back-up pad conforming to this International Standard shall be designated by a) “Back-up pad”; b) reference to this International Standard, i.e. ISO 15636; c) the outside diameter of the disc, d1, in millimetres; d) screw thread (t
28、he thread diameter of the nut d5); e) maximum permissible frequency of rotation, minute to the power minus one (min1). EXAMPLE A back-up pad with a diameter, d1 = 107,5 mm, diameter, d5 = 5/8 UNC and a maximum permissible frequency of rotation of 13 300 min1 is designated as follows: Back-up pad ISO
29、 15636 107,5 5/8 UNC/13300 6 Marking A back-up pad in accordance with this International Standard shall be marked with: manufacturer or supplier or importer or their registered trademark, and maximum permissible speed of rotation. BS ISO 15636:2003 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov
30、 26 08:29:48 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO 15636:2003 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the internation
31、al level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We woul
32、d be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an indi
33、vidual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 700
34、1. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards
35、 BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Cen
36、tre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +
37、44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in a
38、ll BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means e
39、lectronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpos
40、e than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-. Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 26 08:29:48 GMT+00:00 2006, Uncontrolled Copy, (c) BSI