《BS-ISO-IEC-13650-2-1997.pdf》由会员分享，可在线阅读，更多相关《BS-ISO-IEC-13650-2-1997.pdf（34页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS ISO/IEC 13650-2:1997 Information technology Open Systems Interconnection Conformance test suite for the OSI TP protocol Part 2: Test management protocol specification ICS 35.100.70 Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 22 07:26:01 GMT+00:00 2006, Uncontrolled Copy,
2、(c) BSI BS ISO/IEC 13650-2:1997 This British Standard, having been prepared under the direction of the DISC Board, was published under the authority of the Standards Board and comes into effect on 15 August 1997 BSI 09-1999 ISBN 0 580 27865 4 National foreword This British Standard reproduces verbat
3、im ISO/IEC 13650-2:1997 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee IST/21, Open Systems Interconnection, Data Management and Open Distributed Processing, which has the responsibility to: aid enquirers to understand the
4、text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this commi
5、ttee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or using
6、 the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity f
7、rom legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the ISO/IEC title page, pages ii to iv, pages 1 to 24 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be ind
8、icated in the amendment table on the inside front cover. Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 22 07:26:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO/IEC 13650-2:1997 BSI 09-1999i Contents Page National forewordInside fron
9、t cover Forewordiv Text of ISO/IEC 13650-21 Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 22 07:26:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 22 07:26:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Licensed Copy: sheffieldun sheffi
10、eldun, na, Wed Nov 22 07:26:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO/IEC 13650-2:1997 ii BSI 09-1999 Contents Page Forewordiv Introduction1 1Scope1 2Normative references1 3Definitions2 3.1Terms defined in this International Standard2 3.2Terms defined in other International Standards2 3.2
11、.1 Terms defined in ISO/IEC 7498-12 3.2.2 Terms defined in ISO/IEC 96462 3.2.3 Terms defined in ISO/IEC 107313 4Abbreviations3 5Conventions3 6Specification of the TP test management protocol3 6.1Test management phases3 6.1.1 Test procedure establishment phase4 6.1.2 Test execution phase4 6.1.3 Test
12、results collection phase5 6.2Dialogue management5 6.3Protocol data unit descriptions and effects5 6.3.1 TM-TEST-PROCEDURE PDU5 6.3.2 TM-START-TEST PDU6 6.3.3 TM-REQUEST-LOG PDU6 6.3.4 TM-TEST-LOG PDU6 6.3.5 TM-END-TEST-SESSION PDU6 7Upper tester execution rules6 7.1Semantics of TM-TEST-PROCEDURE act
13、ions in the single-party testing context6 7.1.1 SEND action6 7.1.2 RECEIVE action7 7.1.3 MATCH action7 7.1.4 SYNC action7 7.1.5 TIMER action7 7.1.6 END action7 7.2Semantics of TM-TEST-PROCEDURE actions in the multi-party testing context8 7.2.1 SEND action8 7.2.2 RECEIVE action8 7.2.3 MATCH action8 7
14、.2.4 SYNC action8 7.2.5 TIMER action9 7.2.6 END action9 7.3Upper tester default procedure9 7.3.1 Normal default behaviour9 8Interface between the IUT and the upper tester9 8.1Values of the In-service and Out-service ASN.1 types9 8.2Relationship to TP services10 9TMPDU errors10 10Structure and encodi
15、ng of test management protocol data units10 11Conformance16 Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 22 07:26:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO/IEC 13650-2:1997 BSI 09-1999iii Page Annex A (informative) Examples17 A.1 Examples of protocol flow in the results collection
16、phase17 A.2 Examples of the use of actions18 A.2.1 Sequence of Actions18 A.2.2 Branching18 A.2.3 Multi-Party Testing18 A.2.4 Alternative Styles20 A.2.5 SYNC20 A.2.6 Overlapping SYNC21 Annex B (informative) Dialogue management scenarios22 B.1 Dialogue establishment22 B.2 Dialogue Termination23 B.2.1
17、Coordination level = none23 B.2.2 Coordination level = commit23 Figure 1 Control flow for a test session4 Figure A.1 Polarized control functional unit was selected17 Figure A.2 Shared control functional unit was selected17 Figure B.1 IUT acceptor of dialogue and support of shared/polarized22 Figure
18、B.2 IUT not acceptor and shared control FU22 Figure B.3 IUT not acceptor and polarized control FU22 Figure B.4 IUT not acceptor and polarized control FU23 Figure B.5 Dialogue termination for coordination level = none23 Figure B.6 IUT acceptor and coordination level = commit23 Figure B.7 IUT not acce
19、ptor and coordination level = commit24 Table 1 Match7 Table A.1 Sequence of actions18 Table A.2 Branching18 Table A.3 Multi-party testing19 Table A.4 Alternative styles20 Table A.5 Operation of SYNC20 Table A.6 Overlapping of SYNC21 Descriptors: Data processing, information interchange, network inte
20、rconnection, open systems interconnection, data transfer, application layer, communication procedure, protocols, tests, conformity tests. Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 22 07:26:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO/IEC 13650-2:1997 iv BSI 09-1999 Foreword ISO (th
21、e International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees e
22、stablished by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In
23、 the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 7
24、5 % of the national bodies casting a vote. International Standard ISO/IEC 13650-2 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 21, Open systems interconnection, data management and open distributed processing. ISO/IEC 13650 consists of the followin
25、g parts, under the general title Information technology Open Systems Interconnection Conformance test suite for the OSI TP protocol: Part 1: Test suite structure and test purposes; Part 2: Test management protocol specification. Annex A and Annex B of this part of ISO/IEC 13650 are for information o
26、nly. Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 22 07:26:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO/IEC 13650-2:1997 BSI 09-19991 Introduction ISO/IEC 10026, Distributed Transaction Processing (OSI TP), is one of a set of standards produced to facilitate the interconnection of com
27、puter systems. It is related to other International Standards in the set as defined by the Basic Reference Model for Open Systems Interconnection (ISO/IEC 7498-1). The Basic Reference Model subdivides the area of standardization for interconnection into a series of layers of specification, each of m
28、anageable size. In order to ensure that implementations of ISO/IEC 10026-3 are conformant, testing standards have been defined using the methodology described in ISO/IEC 9646. The Coordinated test method has been chosen for the Abstract Test Suite. This particular test method requires the use of a T
29、est Management Protocol, and this part of ISO/IEC 13650 defines the protocol. 1 Scope This part of ISO/IEC 13650 provides: A specification of a Test Management Protocol for use in conformance testing of Distributed Transaction Processing systems when the Coordinated Test Method of ISO/IEC 9646 is em
30、ployed. This Test Management Protocol does not rely on any specified Application Programming Interface (API) within the System Under Test, but rather assumes the existence of a mapping from the abstract service primitives issued by the upper tester to the functionality of the implementation under te
31、st realizing ISO/IEC 10026-3. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this part of ISO/IEC 13650. At the time of publication, the editions indicated were valid. All standards are subject to revision, and partie
32、s to agreements based on this part of ISO/IEC 13650 are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. ISO/IEC 7498-1:1994, Information technology O
33、pen Systems Interconnection Basic Reference Model: The Basic Model. ISO/IEC 7498-3:1997, Information technology Open Systems Interconnection Basic Reference Model: Naming and addressing. ISO/IEC 8649:1996, Information technology Open Systems Interconnection Service definition for the Association Con
34、trol Service Element. ISO/IEC 8822:1994, Information technology Open Systems Interconnection Presentation service definition. ISO/IEC 8824-1:1995, Information technology Abstract Syntax Notation One (ASN.1): Specification of basic notation. ISO/IEC 8825-1:1995, Information technology ASN.1 encoding
35、rules: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER). ISO/IEC 9545:1994, Information technology Open Systems Interconnection Application Layer structure. ISO/IEC 9646-1:1994, Information technology Open Systems Interconnection Conf
36、ormance testing methodology and framework Part 1: General concepts. ISO/IEC 9646-2:1994, Information technology Open Systems Interconnection Conformance testing methodology and framework Part 2: Abstract Test Suite specification. ISO/IEC 10026-1:1992, Information technology Open Systems Interconnect
37、ion Distributed Transaction Processing Part 1: OSI TP Model1). ISO/IEC 10026-2:1996, Information technology Open Systems Interconnection Distributed Transaction Processing Part 2: OSI TP Service1). 1) Currently under revision. Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 22 07:26:01 GMT+00:00
38、 2006, Uncontrolled Copy, (c) BSI BS ISO/IEC 13650-2:1997 2 BSI 09-1999 ISO/IEC 10026-3:1996, Information technology Open Systems Interconnection Distributed Transaction Processing Part 3: Protocol specification2). ISO/IEC 10026-4:1995, Information technology Open Systems Interconnection Distributed
39、 Transaction Processing: Protocol Implementation Conformance Statement (PICS) proforma. ISO/IEC 10731:1994, Information technology Open Systems Interconnection Basic Reference Model Conventions for the definition of OSI services. 3 Definitions 3.1 Terms defined in this International Standard For the
40、 purposes of this part of ISO/IEC 13650, the following definitions apply. a) Action-list: a sequence of actions to be performed by the upper tester in support of a dialogue used in a test case. b) Done-needed: one or more of the following events has occurred during the current transaction and no sub
41、sequent TP-DONE req has been issued: a TP-ROLLBACK req; a TP-ROLLBACK ind; a TP-COMMIT ind; a TP-BEGIN-DIALOGUE(rejected, rollback = “true”) ind; a TP-P-ABORT(rollback = “true”) ind; a TP-U-ABORT(rollback = “true”) ind; a TP-P-ABORT(rollback = “false”) ind on a coordinated dialogue during the termin
42、ation phase of the current transaction; or a TP-U-ABORT(rollback = “false”) ind on a coordinated dialogue during the termination phase of the current transaction. c) Rollback-next-needed: on a chaining dialogue, a TP-P-ABORT ind was received after receipt of a TP-COMMIT ind, and there has been no su
43、bsequent TP-ROLLBACK ind received. d) SYNC group: a set of Action-lists participating in synchronization. e) Test session: the execution of a sequence of test cases from a test campaign. 3.2 Terms defined in other International Standards 3.2.1 Terms defined in ISO/IEC 7498-1 This part of ISO/IEC 136
44、50 uses the following terms defined in ISO/IEC 7498-1: a) application-protocol-data-unit; b) open system. 3.2.2 Terms defined in ISO/IEC 9646 This part of ISO/IEC 13650 uses the following terms defined in ISO/IEC 9646-1: a) Abstract Test Suite; b) Coordinated Single Test Method; c) Implementation Co
45、nformance Statement; d) Implementation Under Test; e) Multi-party testing context; f) Single-party testing context; g) System Under Test; h) Test Management Protocol; i) Test Management Protocol Data Unit; j) Upper Tester. 2) Currently under revision. Licensed Copy: sheffieldun sheffieldun, na, Wed
46、Nov 22 07:26:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO/IEC 13650-2:1997 BSI 09-19993 3.2.3 Terms defined in ISO/IEC 10731 This part of ISO/IEC 13650 uses the following terms defined in ISO/IEC 10731: a) request; b) indication; c) response; d) confirm; e) OSI-service primitive; primitive;
47、f) OSI-service-provider; g) OSI-service-user. 4 Abbreviations For the purposes of this part of ISO/IEC 13650, the following abbreviations apply. 5 Conventions This part of ISO/IEC 13650 is guided by the conventions defined in ISO/IEC 10731, as they apply to the OSI TP service. 6 Specification of the
48、 TP test management protocol The Transaction Processing Test Management Protocol (TMP) is designed for cooperative conformance testing between one or more lower testers and an upper tester. At any particular time, one unique lower tester shall be responsible for the transfer of TMP. This part of ISO
49、/IEC 13650 defines the format the PDUs sent between this specific lower tester and upper tester, and the log records sent from the upper tester to the lower tester during a TP test campaign. Information is exchanged between one of the lower testers and the upper tester in the form of TMPDUs. The TMPDUs are carried as parameters of U-ASE APDUs on TP dialogues. There are five TMPDUs which may be sent during a test case, namely: TM-TEST-PROCEDURE