《DD-CEN-TS-15398-2006.pdf》由会员分享，可在线阅读，更多相关《DD-CEN-TS-15398-2006.pdf（24页珍藏版）》请在三一文库上搜索。
1、DRAFT FOR DEVELOPMENT DD CEN/TS 15398:2006 Resilient, textile and laminate floor coverings Floor covering standard symbols ICS 01.080.10; 59.080.60; 97.150 ? Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 03:47:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI DD C
2、EN/TS 15398:2006 This Draft for Development was published under the authority of the Standards Policy and Strategy Committee on 31 July 2006 BSI 2006 ISBN 0 580 48455 6 National foreword This Draft for Development is the official English language version of CEN/TS 15398:2006. This publication is not
3、 to be regarded as a British Standard. It is being issued in the Draft for Development series of publications and is of a provisional nature. It should be applied on this provisional basis, so that information and experience of its practical application can be obtained. A review of this Draft for De
4、velopment will be carried out not later than 2 years after its publication. Notification of the start of the review period, with a request for the submission of comments from users of this Draft for Development, will be made in an announcement in the appropriate issue of Update Standards. According
5、to the replies received, the responsible BSI Committee will judge whether the Draft for Development can be converted into a British Standard or what other action should be taken. Observations which it is felt should receive attention before the official call for comments will be welcomed. These shou
6、ld be sent to the Secretary of Technical Committee PRI/60, Resilient floor coverings, at British Standards House, 389 Chiswick High Road, London W4 4AL, giving the document reference and clause number and proposing, where possible, an appropriate revision of the text. A list of organizations represe
7、nted on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”,
8、or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Summary of pages This document comprises a front cover, an ins
9、ide front cover, the CEN/TS title page, pages 2 to 21 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: London South Bank University, London South Bank University
10、, Sat Dec 09 03:47:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI TECHNICAL SPECIFICATION SPCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 15398 June 2006 ICS 01.080.10; 59.080.60; 97.150 English Version Resilient, textile and laminate floor coverings - Floor covering standard symbols Revtement
11、s de sol rsilients, textiles et stratifis - Symboles normaliss de revtements de sol Elastische, textile und Laminat-Bodenbelge - Standardisierte Symbole fr Fubodenbelge This Technical Specification (CEN/TS) was approved by CEN on 24 April 2006 for provisional application. The period of validity of t
12、his CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard. CEN members are required to announce the existence of this CEN/TS in the same way
13、as for an EN and to make the CEN/TS available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached. CEN members are t
14、he national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and Uni
15、ted Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2006 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN/TS 15398:
16、2006: E Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 03:47:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 2 Contents Page Foreword3 Introduction.4 1 Scope5 2 Descriptions and definitions of symbols 5 2.1 Classification standard EN 6855 2.2 CE marking EN 140417
17、 2.3 Additional characteristics 12 Bibliography. 20 CEN/TS 15398:2006 Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 03:47:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 3 Foreword This Technical Specification (CEN/TS 15398:2006) has been prepared by Technical C
18、ommittee CEN/TC 134 “Resilient, textile and laminate floor coverings”, the secretariat of which is held by BSI. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to announce this Technical Specification: Austria, Belgium, Cyp
19、rus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. CEN/TS 15398:2006 Licensed Copy: London
20、South Bank University, London South Bank University, Sat Dec 09 03:47:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 4 Introduction Resilient, textile and laminate floor coverings have a number of specific characteristics and are classified in a number of use classes. In order to make the classificat
21、ion and these specific characteristics understandable and recognizable to the consumer, graphic symbols have been developed. For practical reasons, only symbols for characteristics linked directly to a European standard have been developed. Copyright: This document and these symbols are copyright pr
22、otected by CEN. The symbols may not be altered, changed in any way except size and colour. Similarly, no parts or elements of these symbols may be copied or redesigned in order to create new symbols not included in this document. These symbols can only be used when the product is tested or classifie
23、d according to the related standard. CEN/TS 15398:2006 Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 03:47:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 5 1 Scope This document establishes a system of graphic symbols for use in the marking of the following flo
24、or coverings and specifies the use of these symbols. Resilient floor coverings manufactured from plastics, linoleum, cork or rubber, excluding loose-laid mats; textile floor coverings, excluding loose-laid mats; laminate floor coverings; floor panels for loose laying. 2 Descriptions and definitions
25、of symbols If a specific standard is not valid for all three product groups, the relevant product group(s) will be mentioned below using one of the following abbreviations: T = Textile floor coverings R = Resilient floor coverings L = Laminate floor coverings 2.1 Classification standard EN 685 (See
26、relevant product standards linked with EN 685) Figure 1 Class 21 Domestic moderate/light Figure 2 Class 22 Domestic general/medium Figure 3 Class 22+ Domestic general CEN/TS 15398:2006 Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 03:47:14 GMT+00:00 2006, Unco
27、ntrolled Copy, (c) BSI 6 Figure 4 Class 23 Domestic heavy Figure 5 Class 31 Commercial moderate Figure 6 Class 32 Commercial general Figure 7 Class 33 Commercial heavy Figure 8 Class 34 Commercial very heavy CEN/TS 15398:2006 Licensed Copy: London South Bank University, London South Bank University,
28、 Sat Dec 09 03:47:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 7 Figure 9 Class 41 Industrial moderate Figure 10 Class 42 Industrial general Figure 11 Class 43 Industrial heavy 2.2 CE marking EN 14041 NOTE Taken from EN 14041 Figure 12 CE mark NOTE Taken from EN 14041, EN 1815 (R+L), ISO 6356 (T).
29、Figure 13 Electrical behaviour Antistatic floor covering CEN/TS 15398:2006 Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 03:47:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 8 NOTE Taken from EN 14041, EN 1081 (R+L ), ISO 10965 (T). Figure 14 Electrical behavio
30、ur Vertical resistance Static dissipative floor covering NOTE Taken from EN 14041, EN 1081 (R+L ), ISO 10965 (T). Figure 15 Electrical behaviour Vertical resistance Conductive floor covering NOTE Taken from EN 14041, EN 13501-1, EN ISO 11925-2, EN ISO 9239-1. Figure 16 Reaction to fire Class A1fl NO
31、TE Taken from EN 14041, EN 13501-1, EN ISO 11925-2, EN ISO 9239-1. Figure 17 Reaction to fire Class A2fl-s1 CEN/TS 15398:2006 Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 03:47:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 9 NOTE Taken from EN 14041, EN 13501
32、-1, EN ISO 11925-2, EN ISO 9239-1. Figure 18 Reaction to fire Class A2fl-s2 NOTE Taken from EN 14041, EN 13501-1, EN ISO 11925-2, EN ISO 9239-1. Figure 19 Reaction to fire Class Bfl-s1 NOTE Taken from EN 14041, EN 13501-1, EN ISO 11925-2, EN ISO 9239-1. Figure 20 Reaction to fire Class Bfl-s2 NOTE T
33、aken from EN 14041, EN 13501-1, EN ISO 11925-2, EN ISO 9239-1. Figure 21 Reaction to fire Class Cfl-s1 CEN/TS 15398:2006 Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 03:47:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 10 NOTE Taken from EN 14041, EN 13501-1,
34、EN ISO 11925-2, EN ISO 9239-1. Figure 22 Reaction to fire Class Cfl-s2 NOTE Taken from EN 14041, EN 13501-1, EN ISO 11925-2, EN ISO 9239-1. Figure 23 Reaction to fire - Class Dfl-s1 NOTE Taken from EN 14041, EN 13501-1, EN ISO 11925-2, EN ISO 9239-1. Figure 24 Reaction to fire Class Dfl-s2 NOTE Take
35、n from EN 14041, EN 13501-1, EN ISO 11925-2, EN ISO 9239-1. Figure 25 Reaction to fire Class Efl CEN/TS 15398:2006 Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 03:47:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 11 NOTE Taken from EN 14041, EN 13501-1, EN ISO
36、 11925-2, EN ISO 9239-1. Figure 26 Reaction to fire Class Ffl NOTE Taken from EN 14041, EN 13893. Figure 27 Slip resistance Class NPD NOTE Taken from EN 14041, EN 13893. Figure 28 Slip resistance Class DS NOTE Taken from EN 14041, EN 13553 (R). Figure 29 Water tightness for resilient floor coverings
37、 CEN/TS 15398:2006 Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 03:47:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 12 NOTE Taken from EN 14041, EN 717-1, EN 717-2. Figure 30 Formaldehyde emission HCHO Class E1 NOTE Taken from EN 14041, EN 717-1, EN 717-2. Fi
38、gure 31 Formaldehyde emission HCHO Class E2 NOTE Taken from EN 14041, EN 1307(T), EN 1470(T), EN 13297(T), ISO 8302, EN 12524. NOTE For textile floor coverings, both the criteria in EN 14041 and the relevant product standard EN 1307, EN 1470 or EN 13297 must be met. Figure 32 Thermal conductivity 2.
39、3 Additional characteristics NOTE Taken from EN 1307(T), EN 1470(T), EN 13297(T), EN 985(T), EN 14215(T), prEN 15114(T). Figure 33 Castor chair occasional use CEN/TS 15398:2006 Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 03:47:14 GMT+00:00 2006, Uncontrolled
40、 Copy, (c) BSI 13 NOTE Taken from EN 1307(T), EN 1470(T), EN 13297(T), EN 985(T), EN 14215(T), prEN 15114(T), EN 425(R+L). Figure 34 Castor chair continuous use NOTE Taken from EN 1307(T), EN 1470(T), EN 13297(T), EN 1963(T), EN 14215(T), prEN 15114(T). Figure 35 Stairs occasional use NOTE Taken fro
41、m EN 1307(T), EN 1470(T), EN 13297(T), EN 1963(T), EN 14215(T), prEN 15114(T). Figure 36 Stairs continuous use NOTE Taken from EN 1307(T), EN 1470(T), EN 13297(T), EN 1814(T). Figure 37 Resistance to fraying CEN/TS 15398:2006 Licensed Copy: London South Bank University, London South Bank University,
42、 Sat Dec 09 03:47:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 14 NOTE Taken from EN 1307(T), EN 14215(T), prEN 15114(T), EN 1470(T). Figure 38 Luxury class LC1 NOTE Taken from EN 1307(T), EN 13297(T), EN 14215(T). Figure 39 Luxury class LC2 NOTE Taken from EN 1307(T), EN 14215(T). Figure 40 Luxury
43、 class LC3 NOTE Taken from EN 1307(T), EN 14215(T). Figure 41 Luxury class LC4 CEN/TS 15398:2006 Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 03:47:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 15 NOTE Taken from EN 1307(T), EN 14215(T). Figure 42 Luxury clas
44、s LC5 NOTE Taken from EN 1307(T), EN 1470(T), EN 13297(T), prEN 15114(T), EN ISO 105-B02. Figure 43 Light fastness NOTE Taken from EN ISO 354, EN ISO 11654. Figure 44 Acoustical sound absorption NOTE Taken from draft norm. Figure 45 Acoustical drum sound CEN/TS 15398:2006 Licensed Copy: London South
45、 Bank University, London South Bank University, Sat Dec 09 03:47:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 16 NOTE Taken from EN ISO 140-8. Figure 46 Acoustical impact noise reduction NOTE Taken from EN 13329(L), EN 660-1(R), EN 660-2(R). Figure 47 Abrasion resistance NOTE Taken from EN 438-1(L)
46、. Figure 48 Cigarette resistance NOTE Taken from EN 13329(L) and EN 1399(R). Figure 49 Impact resistance CEN/TS 15398:2006 Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 03:47:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 17 NOTE Taken from ISO/FDIS 24334(L). F
47、igure 50 Locking strength of mechanically assembled panels NOTE Taken from EN 13329(L) Figure 51 Thickness swelling - Residential NOTE Taken from EN 13329(L) Figure 52 Thickness swelling Commercial NOTE Taken from EN 423(R), EN 438-1(L). Figure 53 Staining resistance CEN/TS 15398:2006 Licensed Copy:
48、 London South Bank University, London South Bank University, Sat Dec 09 03:47:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 18 NOTE Taken from EN 435(R). Figure 54 Flexibility NOTE Taken from EN 428(R), EN 429(R), ISO 1765(T). Figure 55 Total thickness NOTE Taken from EN 669(R), EN 13329(L), EN 986(
49、T), EN 1307(T), EN 1470(T), EN 13297(T). Figure 56 Dimensional stability NOTE Taken from EN 433(R). Figure 57 Indentation residual CEN/TS 15398:2006 Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 03:47:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 19 NOTE Taken from EN 424(R). Figure 58