《EN-300-476-4-V1.2.1-2000.pdf》由会员分享，可在线阅读，更多相关《EN-300-476-4-V1.2.1-2000.pdf（122页珍藏版）》请在三一文库上搜索。
1、ETSI EN 300 476-4V1.2.1(2000-11) European Standard (Telecommunications series) Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 4: Network (NWK) layer - Fixed radio Termination (FT) ETSI ETSI EN 300 476-4
2、V1.2.1 (2000-11)2 Reference REN/DECT-040106-4 Keywords access, DECT, network, PICS, radio, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-P
3、rfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such
4、 versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject
5、 to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/www.etsi.org/tb/status/ If you find errors in the present document, send your comment to: editoretsi.fr Copyright Notification No part may be reproduced except as authorized by
6、written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2000. All rights reserved. ETSI ETSI EN 300 476-4 V1.2.1 (2000-11)3 Reference REN/DECT-040106-4 Keywords access, DECT, network, PICS, radio, testing ET
7、SI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be d
8、ownloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the refer
9、ence shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents
10、is available at http:/www.etsi.org/tb/status/ If you find errors in the present document, send your comment to: editoretsi.fr Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
11、European Telecommunications Standards Institute 2000. All rights reserved. ETSI ETSI EN 300 476-4 V1.2.1 (2000-11)4 Contents Intellectual Property Rights 6 Foreword6 1Scope7 2References7 3Definitions and abbreviations8 3.1Definitions 8 3.2Abbreviations 8 4Conformance requirement concerning PICS8 Ann
12、ex A (normative):NWK PICS Proforma for FT 9 A.1Introduction for completing the PICS proforma.9 A.1.1Purposes and structure. 9 A.1.2Instruction for completing the PICS. 11 A.2Identification of the implementation11 A.2.1Date of statement. 11 A.2.2Implementation Under Test (IUT) identification 11 A.2.3
13、System Under Test (SUT) identification 12 A.2.4Product supplier 12 A.2.5Client 12 A.2.6Contact person 12 A.3Identification of the protocol.13 A.3.1Defect report numbers and amendments implemented 13 A.3.2Addenda implemented. 13 A.4Global statement of conformance13 A.5Capabilities.14 A.5.1Major capab
14、ilities 14 A.5.1.1Entities 14 A.5.1.2CC features 15 A.5.1.3MM features 16 A.5.1.4SS features (services). 17 A.5.1.5LCE features 18 A.5.1.6COMS features 18 A.5.1.7Procedures. 19 A.5.2Messages. 23 A.5.2.1Call control messages. 24 A.5.2.2Mobility management messages. 36 A.5.2.3Connection-related Essent
15、ial, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/www.etsi.org/ipr). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried
16、out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by
17、ETSI Project Digital Enhanced Cordless Telecommunications (DECT). The present document is part 4 of a multi-part deliverable covering the Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Protocol Implementation Conformance Statement (PICS) proforma, as identified below: Pa
18、rt 1:“Network (NWK) layer - Portable radio Termination (PT)“; Part 2:“Data Link Control (DLC) layer - Portable radio Termination (PT)“; Part 3:“Medium Access Control (MAC) layer - Portable radio Termination (PT)“; Part 4:“Network (NWK) layer - Fixed radio Termination (FT)“; Part 5:“Data Link Control
19、 (DLC) layer - Fixed radio Termination (FT)“; Part 6:“Medium Access Control (MAC) layer - Fixed radio Termination (FT)“; Part 7:“Physical layer“. Annex A contains the PICS proforma for the FT network layer. National transposition dates Date of adoption of this EN:24 November 2000 Date of latest anno
20、uncement of this EN (doa):28 February 2001 Date of latest publication of new National Standard or endorsement of this EN (dop/e):31 August 2001 Date of withdrawal of any conflicting National Standard (dow):31 August 2001 ETSI ETSI EN 300 476-4 V1.2.1 (2000-11)7 1Scope The present document provides t
21、he Protocol Implementation Conformance Statement (PICS) proforma for the Digital Enhanced Cordless Telecommunications Network layer at the Fixed Termination as defined in EN 300 175-5 5 in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7
22、9. The supplier of an implementation which is claimed to conform to EN 300 175-5 5 is required to complete a copy of the PICS proforma provided in the annex A of the present document. 2References The following documents contain provisions which, through reference in this text, constitute provisions
23、of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. A non-specific reference to an ETS
24、 shall also be taken to refer to later versions published as an EN with the same number. 1ETSI EN 300 175-1: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 1: Overview“. 2ETSI EN 300 175-2: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI)
25、; Part 2: Physical Layer (PHL)“. 3ETSI EN 300 175-3: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 3: Medium Access Control (MAC) layer“. 4ETSI EN 300 175-4: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 4: Data Link Control (DL
26、C) layer“. 5ETSI EN 300 175-5: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 5: Network (NWK) layer“. 6ETSI EN 300 175-6: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 6: Identities and addressing“. 7ETSI EN 300 175-7: “Digital
27、Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 7: Security features“. 8ISO/IEC 9646-1 (1995): “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. 9ISO/IEC 9646-7 (1995): “Information technology
28、- Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements“. 10ETSI EN 300 476-5: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 5: Da
29、ta Link Control (DLC) layer - Fixed radio Termination (FT)“. 11ETSI EN 300 476-6: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 6: Medium Access Control (MAC) layer - Fixed radio Termination (FT)“. ETS
30、I ETSI EN 300 476-4 V1.2.1 (2000-11)8 12ETSI EN 300 476-7: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 7: Physical layer“. 3Definitions and abbreviations 3.1Definitions For the purposes of the presen
31、t document, the following terms and definitions apply: -terms given in EN 300 175-1 1; -terms given in ISO/IEC 9646-1 8 and in ISO/IEC 9646-7 9. In particular, the following terms given in ISO/IEC 9646-1 8 apply: Implementation Conformance Statement (ICS): statement made by the supplier of an implem
32、entation or system claimed to conform to a given specification, stating which capabilities have been implemented. The ICS can take several forms: protocol ICS, profile ICS, profile specific ICS, information object ICS, etc. ICS proforma: document, in the form of a questionnaire, which when completed
33、 for an implementation or system becomes an ICS Protocol ICS (PICS): PICS for an implementation or system claimed to conform to a given protocol specification The following definition also applies: DECT Common Interface ICS: ICS for an implementation or system claimed to conform to a given DECT Comm
34、on Interface specification 3.2Abbreviations For the purposes of the present document, the abbreviations given in ISO/IEC 9646-1 8, the Network layer abbreviations defined in EN 300 175-5 5, and the following apply: ICSImplementation Conformance Statement IUTImplementation Under Test len_blength spec
35、ified as BITSTRING len_olength specified as OCTETSTRING PICSProtocol Implementation Conformance Statement Sp.support(ed) Stat.Status SUTSystem Under Test valvalue (of the field) val_cC-plane connection value val_p_cvalue parameter coding val_uU-plane connection value 4Conformance requirement concern
36、ing PICS If it claims to conform to the present document, the actual PICS proforma to be filled in by a supplier shall be technically equivalent to the text of the PICS proforma given in annex A, and shall preserve the numbering/naming and ordering of the proforma items. An ICS which conforms to the
37、 present document shall be a conforming PICS proforma completed in accordance with the instructions for completion given in clause A.1. ETSI ETSI EN 300 476-4 V1.2.1 (2000-11)9 Annex A (normative): NWK PICS Proforma for FT Notwithstanding the provisions of the copyright clause related to the text of
38、 the present document, ETSI grants that users of the present document may freely reproduce the NWK PICS proforma in this annex so that it can be used for its intended purposes and may further publish the completed NWK PICS. A.1Introduction for completing the PICS proforma A.1.1Purposes and structure
39、 The purpose of this PICS proforma is to provide a mechanism whereby a supplier of an implementation of the fixed termination specific network layer requirements of EN 300 175-5: DECT Network layer may provide information about the implementation in a standardized manner. The PICS proforma is subdiv
40、ided into subclauses for the following categories of information: -instructions for completing the PICS proforma; -identification of the implementation; -identification of the EN 300 175-5: DECT Network layer; -PICS proforma tables: -global statement of conformance; -functional groups and procedures
41、; -timers and protocol parameters; -messages; -information elements; -negotiation capabilities; -protocol error handling; -multilayer dependencies. The PICS proforma contained in this annex is comprised of information in tabular form in accordance with the guidelines presented in ISO/IEC 9646-7. Ite
42、m column The item column contains a number which identifies the item in the table. Item description column The item description column describes in free text each respective item (e.g. parameters, timers, etc.). It implicitly means “is supported by the implementation?“. ETSI ETSI EN 300 476-4 V1.2.1
43、 (2000-11)10 Status column The following notations, defined in ISO/IEC 9646-7, are used for the status column: m or Mmandatory - the capability is required to be supported. o or Ooptional - the capability may be supported or not (e.g. the capability is not allowed because the underlying DECT layers
44、(service provider) cannot handle it or therequirement belongs to an application i.e. does not belong to the network layer) n/a or N/Anot applicable - in the given context, it is impossible to use the capability. x or Xprohibited (excluded) - there is a requirement not to use this capability in the g
45、iven context. o.i or O.iqualified optional - for mutually exclusive or selectable options from a set. “i“ is an integer which identifies an unique group of related optional items and the logic of their selection which is defined immediately following the table. ci or Ciconditional - therequirement o
46、n the capability (“m“, “o“, “x“ or “n/a“) depends on the support of other optional or conditional items. “i“ is an integer identifying an unique conditional status expression which is defined immediately following the table or which is defined in the general condition table below. i or Iout-of-scope
47、 - this capability is outside the scope of the given specification, and hence irrelevant and not subject to conformance testing. This status is in particular applicable for data fields which are reserved for future use. The structure of such fields has to be supported, but the value is undefined and
48、 thus to be ignored. Table A.1: General condition table Condition identifier Condition definition c01IF A.24/1 THEN m ELSE o c02IF A.20/8 THEN o ELSE n/a c03IF A.20/2 THEN o ELSE n/a c04IF A.18/3 THEN o ELSE n/a c05IF A.20/8 THEN m ELSE n/a c06IF A.20/2 THEN m ELSE n/a c07IF A.18/41 THEN o.101 ELSE
49、n/a c08IF A.18/5 OR A.18/12 THEN m ELSE n/a c09IF A.27/29 THEN o ELSE n/a c010IF A.27/30 THEN o ELSE n/a c011IF A.28/29 THEN o ELSE n/a c012IF A.28/30 THEN o ELSE n/a c013IF A.18/21 THEN m ELSE o c014IF A.18/3 THEN m ELSE n/a c015IF A.18/40 THEN o.102 ELSE n/a o.101It is mandatory to support at least one of these options o.102It is mandatory to support at least one of these options Reference column The reference column gives reference to EN 300 175-5: Network layer, except where explicitly stated otherwise. Support co