HD-22.2-S2-A11-1995.pdf

上传人:yyf 文档编号:3767917 上传时间:2019-09-23 格式:PDF 页数:3 大小:122.60KB
返回 下载 相关 举报
HD-22.2-S2-A11-1995.pdf_第1页
第1页 / 共3页
HD-22.2-S2-A11-1995.pdf_第2页
第2页 / 共3页
HD-22.2-S2-A11-1995.pdf_第3页
第3页 / 共3页
亲,该文档总共3页,全部预览完了,如果喜欢就下载吧!
资源描述

《HD-22.2-S2-A11-1995.pdf》由会员分享,可在线阅读,更多相关《HD-22.2-S2-A11-1995.pdf(3页珍藏版)》请在三一文库上搜索。

1、HARMONIZATION DOCUMENT HD 22.2 S2lAIl DOCUMENT DHARMONISATION HARMONISIERUNGSDOKUMENT June 1995 UDC 621.31 5.21 1.2.027.475.001.4 ICs 29.060.20 Descriptors: See HD 22.2 52:1992 English version Rubber insulated cables of rated voltages up to and including 450/750 V Part 2: Test methods Conducteurs et

2、 cbles isols au caoutchouc, de tension assigne au plus gale 450/750 V Partie 2: Mthodes dessais Isolierte Starkstromleitungen mit einer Isolierung aus Gummi mit Nennspannungen bis 450/750 V Teil 2: Prfverfahren This amendment A l 1 modifies the Harmonization Document HD 22.2 S2:1992; it was approved

3、 by CENELEC on 1995-05-1 5. CENELEC members are bound to comply with the CENKENELEC Internal Regulations which stipulate the conditions for implementation of this amendment on a national level. Up-to-date lists and bibliographical references concerning such national implementation may be obtained on

4、 application to the Central Secretariat or to any CENELEC member. This amendment exists in three official versions (English, French, German). CENELEC members are the national electrotechnical committees of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembou

5、rg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassari 35, B - 1050 Brussel

6、s 1995 Copyright reserved to CENELEC members Ref. No. HD 22.2 S2:1992/A11:1995 E Page 2 HD 22.2 S2: 1 992/A11: 1995 Foreword This amendment was prepared by the Technical Committee CENELEC TC 20, Electric cables. L The text of the draft was submitted to the Unique Acceptance Procedure and was approve

7、d by CENELEC as amendment A l 1 to HD 22.2 S2:1992 on 1995-05-1 5. The following dates were fixed: - latest date by which the existence of the amendment has to be announced at national level (doa) 1996-01 -01 - latest date by which the amendment has to be implemented at national level by publication

8、 of a harmonized national standard or by endorsement (dop) 1996-07-01 - latest date by which the national standards conflicting with the amendment have to be withdrawn (daw) 1996-07-01 For products which have complied with HO 22.2 S2: 1992 and its amendments A5: 1992, A6:1992, A7:1992, A8:1993 and A

9、9:1993 before 1996-07-01, as shown by the manufacturer or by a certification body, this previous standard may continue to apply for production until 1997-07-01. c b CENELEC HD*:22.2 S2/ALL 95 3404583 0254497 994 W Page 3 HD 22.2 S2:1992/A11: 1995 Sub-clauses 2.4.1 Modify first paragraph of the sub-c

10、lause as follows: This test shall be made on the core samples, 5m long, previously submitted to the test described in sub- clause 2.3 of this Part of HD 22 or, if this is not applicable, to the test described in sub-clause 2.2 of this Part of HD 22. Delete all the text from the beginning of the sixt

11、h paragraph to the end of the clause. Add a note to the bottom: This test applies only when required by the particular part of this HD. Sub-clause 2.5 Insert new sub-clause as follows: 2.5 Lona term resistance of insulation to direct CU rrent This test shall be made on samples of core 5m long, after

12、 removal of any covering. The samples shall be immersed in an aqueous solution of sodium chloride at about 10 g/litre, brought to the specified temperature. A length of about 0.25m at each end of the sample shall be kept above the solution. A voltage of 220V D.C. shall be applied between the conduct

13、or(s1 of each sample, connected to the negative pole, and copper electrode immersed in the solution, connected to the positive pole. The temperature of the solution and the duration of the applied voltage shall be as specified in Part 1, Table 111. After the test, the exterior of the insulation should show no damage. NOTE: Discolouration of the insulation should be ignored.

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 其他


经营许可证编号:宁ICP备18001539号-1