《ISO-8303-1985.pdf》由会员分享，可在线阅读，更多相关《ISO-8303-1985.pdf（3页珍藏版）》请在三一文库上搜索。
1、8303-85 I 4851903 0063657 3 r International Standard 8303 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION*MEWYHAPOAHAR OPTAHMJAUMR fl0 CTAHAAPTM3AUWM*ORGANlSATlON INTERNATIONALE DE NORMALISATION Shipbuilding - Shipborne barges, series 3 - Main operational and technical requirements Construction naval
2、e - Barges de la srie 3 ernbarcables bord des navires - Exigences principales dexploitation et techniques First edition - 1985-05-01 UDC 629.122.3 : 629.123.5 Ref. No. IS0 8303-1985 (E) Descriptors : shipbuilding, ships, barges, specifications, operating requirements, safety requirements. Price base
3、d on 1 page Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/25/2007 09:22:41 MDTNo reproduction or networking permitted without license from IHS -,-,- - 8303-85 Foreword IS0 (the Interna
4、tional Organization for Standardization) is a worldwide federation of national standards bodies (IS0 member bodies). The work of preparing International Standards is normally carried out through IS0 technical committees. Each member body interested in a subject for which a technical committee has be
5、en established has the right to be represented on that committee. International organizations, govern- mental and non-governmental, in liaison with ISO, also take part in the work. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval befo
6、re their acceptance as International Standards by the IS0 Council. They are approved in accordance with IS0 procedures requiring at least 75 % approval by the member bodies voting. International Standard IS0 8303 was prepared by Technical Committee ISO/TC 8, Shipbuilding and marine structures. O Int
7、ernational Organization for Standardization, 1985 Printed in Switzerland Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/25/2007 09:22:41 MDTNo reproduction or networking permitted witho
8、ut license from IHS -,-,- 1 Scope and field of application This International Standard specifies the main operational and technical requirements for shipborne barges, series 3, when used as a means of transport for cargo transportation both on board a barge-carrier and on inland waterways. 2 Referen
9、ce IS0 6765, Shipbuilding - Shipborne barges, series 3 - Main dimensions. 3 Shipborne barge requirements when used for cargo transportation on board a barge-carrier 3.1 shall meet the requirements of IS0 6765. The main dimensions and characteristics of the barge 3.2 comply with the rules of a recogn
10、ized classification society. The material and the hull structure of the barge shall 3.3 The barge shall have devices (bollards, bitts and coupling winches) for connecting it to another barge and to a push-tug, for mooring it alongside a barge-carrier, and for bringing it and centring it over the dec
11、k or elevator platform of a barge-carrier as is done on existing shipborne barges, series 3. 3.4 The barge shall be equipped with tie-down fittings along the sides for lashing it when stowed on the open deck of the barge-carrier, and with special areas on hatch covers for jacks to secure the barge i
12、n the hold of a barge-carrier. The arrange- ment of the tie-down fittings and special areas for jacks shall be in accordance with IS0 6765. 3.5 the barge for access to the barge. A flush vertical ladder shall be provided on each side of 3.6 safe securing of cargo. The barge shall be equipped with de
13、vices for ensuring the 3.7 If there is a ventilation system on the barge, provision shall be made for connecting this system to that of a barge- carrier analogous to the existing systems on shipborne barges, series 3. 3.8 The barge shall have devices for connection of carbon dioxide supply hoses and
14、 for fire warning analogous to those on existing shipborne barges, series 3. 3.9 a barge-carrier shall not exceed 30 and 40 cm respectively. The list and trim of the fully laden barge when loaded on 4 Shipborne barge requirements when used for cargo transportation on inland waterways 4.1 Provision s
15、hall be made for the barge to form a convoy when the difference between its draught and that of an adjoin- ing barge in single line is not greater than 1,5 m. 4.2 The barge shall be provided with towing and mooring ar- rangements to ensure its safe attachment to the convoy. 4.3 formation of a barge
16、convoy in several lines. The towing and mooring arrangements shall permit the 4.4 barges towed in single line in river conditions. The anchor gear shall permit the anchoring of two laden 4.5 All deck openings, including cargo and companion hatches, shall have protective safety covers. 4.6 If the tra
17、nsportation of containers is foreseen, devices for securing 6 m (20 ft) and 12 m (40 ft) containers shall be mounted in the inner double bottom and on the hatch covers. 4.7 The barge shall be provided with stationary cables with sockets for power supply from a push-tug when towed in a barge convoy,
18、analogous to those on existing shipborne barges, series 3. 4.8 safe movement of people on the barge deck. The barge shall be provided with devices for ensuring the 1 Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/25/2007 09:22:41 MDTNo reproduction or networking permitted without license from IHS -,-,-