《MIL-DTL-83527-1C-2004 1.28.pdf》由会员分享，可在线阅读，更多相关《MIL-DTL-83527-1C-2004 1.28.pdf（6页珍藏版）》请在三一文库上搜索。
1、 MIL-DTL-83527/1C 13 January 2004 SUPERSEDING MIL-C-83527/IB 8 June 1992 DETAIL SPECIFICATION SHEET CONNECTOR, PLUG, ELECTRICAL, RECTANGULAR, MULTIPLE INSERT TYPE, RACK TO PANEL, ENVIRONMENT RESISTING, 150C CONTINUOUS OPERATING TEMPERATURE, SHELL SIZE 2 This specification is approved for use by all
2、Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-83527. FIGURE 1. Connector, plug. AMSC N/A FSC 5935 METRIC MIL-DTL-83527/1C 2 FIGURE 1. Connector, plug - Continued. MIL-DTL-83527/
3、1C 3 FIGURE 1. Connector, plug - Continued. MIL-DTL-83527/1C 4 mm Inches mm Inches mm Inches mm Inches 0.15 0.18 0.20 0.25 0.30 0.38 0.58 0.76 1.02 1.45 1.70 1.78 1.83 1.88 2.03 2.16 2.54 2.62 2.67 .006 .007 .008 .010 .012 .015 .023 .030 .040 .057 .067 .070 .072 .074 .080 .085 .1 .103 .105 3.07 3.71
4、 3.88 3.91 3.96 3.99 4.67 4.70 4.78 4.93 5.13 5.18 5.44 5.46 5.84 5.94 8.26 10.80 12.78 13.28 .120 .146 .153 .154 .156 .157 .184 .185 .188 .194 .202 .204 .214 .215 .230 .234 .325 .425 .503 .523 13.54 14.05 16.10 17.91 18.67 19.18 20.70 21.08 24.76 27.69 27.74 28.24 32.69 32.79 33.27 33.76 33.96 34.0
5、6 34.46 .533 .553 .634 .705 .735 .755 .815 .830 .975 1.090 1.092 1.112 1.287 1.291 1.310 1.329 1.337 1.341 1.357 40.39 41.02 41.88 42.14 45.14 45.24 54.79 57.30 60.96 80.90 100.51 100.61 100.66 100.71 100.84 109.88 110.13 120.09 120.19 130.81 131.32 1.590 1.615 1.649 1.659 1.777 1.781 2.236 2.256 2.
6、4 3.185 3.957 3.961 3.963 3.965 3.970 4.326 4.336 4.728 4.732 5.15 5.170 NOTES: 1. Dimensions are in millimeters. 2. Inch equivalents are in parentheses. 3. Inch equivalents are given for general information only. FIGURE 1. Connector, plug - Continued. Datum S Datum T 100.66 (3.963) 100.64 (3.962) 1
7、00.61 (3.961) 32.79 (1.291) 0.30 (.012) 0.30 (.012) 0.30 (.012) 32.77 (1.290) 0.28 (.011) 0.28 (.011) 0.28 (.011) 32.74 (1.289) 0.25 (.010) 0.25 (.010) 0.25 (.010) 32.72 (1.288) 0.23 (.009) 0.23 (.009) 0.23 (.009) 32.69 (1.287) 0.20 (.008) 0.20 (.008) 0.20 (.008) 100.58 (3.960) 100.56 (3.959) 100.53
8、 (3.958) 100.51 (3.957) Datum S 0.28 (.011) 0.25 (.010) 0.23 (.009) 0.20 (.008) 0.25 (.010) 0.23 (.009) 0.23 (.009) 0.20 (.008) 0.23 (.009) 0.23 (.009) 0.20 (.008) 0.18 (.007) 0.23 (.009) 0.20 (.008) 0.18 (.007) 0.18 (.007) 0.20 (.008) 0.18 (.007) 0.18 (.007) 0.15 (.006) MIL-DTL-83527/1C 5 REQUIREME
9、NTS Dimensions and configuration: Shall be in accordance with figure 1. Contacts: See MIL-C-39029/93, /94, /98, and /100. Inserts: See DOD-STD-1842 and MIL-C-83527/7. Mating connector: See MIL-DTL-83527/2. Part or Identifying Number (PIN) example: M83527 /01- A 002 Basic specification identifier Spe
10、cification sheet number See 1/ Insert designator from DOD-STD-1842 1/ “A” designator for insert with contacts, “B” designator for insert without contacts. Reference documents. In addition to MIL-DTL-83527, this document references the following: MIL-DTL-83527/2 MIL-C-83527/7 MIL-C-39029/93 MIL-C-390
11、29/94 MIL-C-39029/98 MIL-C-39029/100 DOD-STD-1842 MIL-DTL-83527/1C 6 CONCLUDING MATERIAL Custodians: Preparing activity: Army - CR DLA - CC Navy - AS Air Force - 11 DLA - CC (Project 5935-4509-001) Review activities: Army - AR, MI Navy - EC, MC, OS Air Force - 19, 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online data at http:/www.dodssp.daps.mil.