《NF-EN-10217-1-A1-2005-ENG.pdf》由会员分享，可在线阅读，更多相关《NF-EN-10217-1-A1-2005-ENG.pdf（9页珍藏版）》请在三一文库上搜索。
1、NF EN 10217-1/A1 juillet 2005 Ce document est usage exclusif et non collectif des clients Saga Web. Toute mise en rseau, reproduction et rediffusion, sous quelque forme que ce soit, mme partielle, sont strictement interdites. This document is intended for the exclusive and non collective use of Saga
2、 Web customers. All network exploitation, reproduction and re-dissemination,even partial, whatever the form (hardcopy or other media), is strictly prohibited. Saga Web Pour THALES CORPORATE SERVICES SAS - EPM Client 04988312 le 5/5/2009 09:40 AFNOR 2005AFNOR 20051st issue 2005-07-P AFNOR 2005 All ri
3、ghts reserved FE124959ISSN 0335-3931 NF EN 10217-1/A1 July 2005 Classification index: A 49-201-1/A1 European standard French standard Published and distributed by Association Franaise de Normalisation (AFNOR French standard institute) 11, avenue Francis de Pressens 93571 Saint-Denis La Plaine Cedex
4、Tel.: + 33 (0)1 41 62 80 00 Fax: + 33 (0)1 49 17 90 00 www.afnor.fr ICS: 23.040.10; 77.140.75 Welded steel tubes for pressure purposes Technical delivery conditions Part 1: Non-alloy steel tubes with specified room temperature properties F : Tubes souds en acier pour service sous pression Conditions
5、 techniques de livraison Partie 1 : Tubes en acier non alli avec caractristiques spcifies temprature ambiante D : Geschweite Stahlrohre fr Druckbeanspruchungen Technische Lieferbedingungen Teil 1: Rohre aus unlegierten Sthlen mit festgelegten Eigenschaften bei Raumtemperatur Amendment A1 to the appr
6、oved standard NF EN 10217-1, dated December 2002, approved by decision of the Director General of AFNOR on June 5, 2005 taking effect on July 5, 2005. CorrespondenceThe amendment A1:2005 to the European standard EN 10217-1:2002 has the status of French standard. AnalysisThis amendment brings the ele
7、ments necessary to prove the conformity of the standard with the essential requirements of the Directive 97/23/EC which apply to the products covered by this document. DescriptorsTechnical International Thesaurus: steel tubes, welded tubes, unalloyed steels, designation, manufacturing, delivery cond
8、ition, chemical composition, dimensions, dimensional tolerances, appearance, inspection, technical documents, tests, marking. Modifications Corrections EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 10217-1:2002/A1 January 2005 ICS 23.040.10; 77.140.75 English version Welded steel tubes for pr
9、essure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties Tubes souds en acier pour service sous pression - Conditions techniques de livraison - Partie 1: Tubes en acier non alli avec caractristiques spcifies temprature ambiante Geschw
10、eite Stahlrohre fr Druckbeanspruchungen - Technische Lieferbedingungen - Teil 1: Rohre aus unlegierten Sthlen mit festgelegten Eigenschaften bei Raumtemperatur This amendment A1 modifies the European Standard EN 10217-1:2002; it was approved by CEN on 9 December 2004. CEN members are bound to comply
11、 with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secre
12、tariat or to any CEN member. This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official vers
13、ions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switz
14、erland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2005 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No.
15、 EN 10217-1:2002/A1:2005: E EN 10217-1:2002/A1:2005 (E) 2 Contents Page Foreword3 9 Inspection.4 9.1 Types of inspection4 9.2 Inspection documents4 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of 97/23/EC 6 EN 10217-1:2002/A1:2005 (E) 3 Foreword T
16、his document (EN 10217-1:2002/A1:2004) has been prepared by Technical Committee ECISS/TC 29 “Steel tubes and fittings for steel tubes”, the secretariat of which is held by UNI. This Amendment to European Standard EN 10217-1:2002 shall be given the status of a national standard, either by publication
17、 of an identical text or by endorsement, at the latest by July 2005, and conflicting national standards shall be withdrawn at the latest by July 2005. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essenti
18、al requirements of EU Directive 97/23/EC. For relationship with EU Directive 97/23/EC, see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this
19、European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 10217-
20、1:2002/A1:2005 (E) 4 9 Inspection 9.1 Types of inspection Conformity to the requirements of the order, for tubes in accordance with this Part of EN 10217, shall be checked by: non-specific inspection for quality TR1; specific inspection for quality TR2. When an inspection document 3.1.B is specified
21、, the manufacturer shall state in the confirmation of the order whether he is operating according to a “quality assurance system”, certified by a competent body established within the community, and having undergone a specific assessment for materials and processes relevant to manufacture of welded
22、tubes, including welding procedure approvals, welder/weld operator approval and NDT operator approval. NOTE See Directive 97/23/EC Annex I section 4.3 third paragraph Option 9: Specific inspection shall be carried out for quality TR1. 9.2 Inspection documents 9.2.1 Types of inspection documents The
23、following inspection documents, in accordance with EN 10204, shall be issued; test report 2.2 for quality TR1; inspection certificate 3.1.B for quality TR2. Option 10: One of the following inspection documents, specified by the purchaser, shall be issued: for quality TR1 if specific inspection is or
24、dered, an inspection document type 3.1.A, 3.1.B, 3.1.C or 3.2; for quality TR2, an inspection document 3.1.A, 3.1.C or 3.2. If an inspection document 3.1.A, 3.1.C or 3.2 is specified, the purchaser shall notify the manufacturer of the name and address of the organisation or person who is to carry ou
25、t the inspection and produce the inspection document. In the case of the inspection report 3.2 it shall be agreed which party shall issue the certificate. Note document 3.1.A is not acceptable for compliance with the Directive 97/23/EC 9.2.2 Content of inspection documents 9.2.2.1 The content of the
26、 inspection document shall be in accordance with EN 10168 as shown in 9.2.2.2 and 9.2.2.3. In all types of inspection documents a statement on the conformity of the products delivered with the requirements of this specification and of the order shall be included. 9.2.2.2 For tubes supplied with non-
27、specific inspection the test report shall contain the following codes and information: A commercial transactions and parties involved; B description of products to which the inspection document applies; EN 10217-1:2002/A1:2005 (E) 5 C01C02 location of the samples and direction of test pieces; C10C13
28、 tensile test; C71C92 chemical composition; D01 marking and identification, surface appearance, shape and dimensional properties; D02D99 leak-tightness test, NDT of the weld seam; Z validation 9.2.2.3 For tubes supplied with specific inspection the inspection certificate or inspection report shall c
29、ontain the following codes and information: A commercial transactions and parties involved; B description of products to which the inspection document applies; C01C03 the location of the samples and direction of test pieces and testing temperature; C10C13 tensile test; C40C43 impact test, if applica
30、ble; C50C59 bend test; C60C69 other tests (e.g. flattening, drift expanding); C71C92 chemical composition on cast analysis (product analysis if applicable); D01 marking and identification, surface appearance, shape and dimensional properties; D02D99 leak-tightness test, NDT of the weld seam. Referen
31、ce to welding procedure approval; Reference to welder and or welding operator approval; Reference to non-destructive testing operators approval; Z validation In addition for inspection document 3.1.B the manufacturer shall state the references to the certificate (see 9.1) of the appropriate “quality
32、 assurance system”, if applicable. EN 10217-1:2002/A1:2005 (E) 6 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of 97/23/EC This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Associati
33、on to provide a means of conforming to Essential Requirements of the New Approach Directive 97/23/EC. Once this standard is cited in the Official Journal of the European Union under that Directive and has been implemented as a national standard in at least one Member State, compliance with the claus
34、es of this standard given in table ZA-1 confers, within the limits of the scope of this standard, a presumption of conformity with the corresponding Essential Requirements of that Directive and associated EFTA regulations. Table ZA-1 Correspondence between this European standard and Directive 97/23/
35、EC Clauses/sub-clauses of this EN Pressure Equipment Directive 97/23/EC Annex I Content 7.3.3 3.1.2 Welding 7.3.1 3.1.3 NDT personnel 8.3 4.1a Appropriate material properties 7.3 and 8.4 4.1d Suitable for the processing procedures 9 and 10 4.3 Documentation WARNING: Other requirements and other EC Directives may be applicable to the product(s) falling within the scope of this standard.