《5082-H113-E0000中文资料.docx》由会员分享，可在线阅读，更多相关《5082-H113-E0000中文资料.docx（23页珍藏版）》请在三一文库上搜索。
1、5082-H113-E0000中文资料DevicesAlGaAs Orange Red HER Green Package HDSP-HDSP-HDSP-HDSP- DescriptionDrawingA411A111A211A5117.6 mm Common Anode Right Hand Decimal A A413A113A213A5137.6 mm Common Cathode Right Hand Decimal B F411F111F211F51110 mm Common Anode Right Hand Decimal C F413F113F213F51310 mm Commo
2、n Cathode Right Hand Decimal D G411G111G211G51110 mm Two Digit Common Anode Right Hand Decimal E G413G113G213G51310 mm Two Digit Common Cathode Right Hand Decimal F H411H111H211H51114.2 mm Common Anode Right Hand Decimal G H413H113H213H51314.2 mm Common Cathode Right Hand Decimal H K411K111K211K5111
3、4.2 mm Two Digit Common Anode Right Hand Decimal I K413K113K213K51314.2 mm Two Digit Common Cathode Right Hand DecimalJBlack Surface Seven Segment Displays Technical DataFeatures? Black Surface and Color Tinted Epoxy? Industry Standard Size ? Industry Standard Pinout ? Choice of Character Size 7.6 m
4、m (0.30 in.), 10 mm (0.40in.), 14.2 mm (0.56 in.)? Choice of ColorsAlGaAs Red, High Efficiency Red (HER), Green, Orange ? Excellent Appearance Evenly Lighted Segments 50 Viewing Angle? Design FlexibilityCommon Anode or Common CathodeSingle and Two Digit? Categorized for Luminous IntensityCategorized
5、 for Color: Green Use of Like Categories Yields a Uniform Display? Excellent for Long Digit String MultiplexingDescriptionThese devices use industrystandard size package and pinout.Available with black surfaceHDSP-AX11/-AX13 Series HDSP-FX11/-FX13 Series HDSP-GX11/-GX13 Series HDSP-HX11/-HX13 Series
6、 HDSP-KX11/-KX13 Seriesfinish. All devices are available as either common anode or common cathode.Typical applications includeappliances, channel indicators of TV, CATV converters, game machines, and point of sale terminals.Part Numbering System5082 -X X X X-X X X X XHDSP-X X X X-X X X X XMechanical
7、 Options100: No Mechanical OptionColor Bin Options1,20: No Color Bin LimitationMaximum Intensity Bin1,20: No Maximum Intensity Bin LimitationMinimum Intensity Bin1,20: No Minimum Intensity Bin LimitationDevice Configuration/Color11: Common Anode3: Common CathodeDevice Specific Configuration1Refer to
8、 Respective DatasheetPackage1A: 7.6 mm (0.3 inch) Single Digit Seven Segment DisplayF: 10 mm (0.4 inch) Single Digit Seven Segment DisplayG: 10 mm (0.4 inch) Dual Digit Seven Segment DisplayH: 14.2 mm (0.56 inch) Single Digit Seven Segment DisplayK: 14.2 mm (0.56 inch) Dual Digit Seven Segment Displ
9、ay Notes:1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearestAgilent representative for details.2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1bin per tube (exceptions may apply)
10、. Please refer to respective datasheet for specific bin limit information.Package Dimensions (7.6 mm Series)Internal Circuit DiagramPackage Dimensions (10 mm Series: Single)Internal Circuit DiagramPackage Dimensions (10 mm Series: Two Digit)Internal Circuit DiagramPackage Dimensions (14.2 mm Series:
11、 Single)Internal Circuit DiagramPackage Dimensions (14.2 mm Series: Two Digit)Internal Circuit Diagram2DIGIT NO. 1 CATHODE1Absolute Maximum RatingsAlGaAs Red HER/Orange GreenHDSP-X11X HDSP-X21X/X41X HDSP-X51X Description Series Series Series Units Average Power per Segment37105105mW or DPPeak Forwar
12、d Current per45901903mA Segment or DPDC Forward Current per155302304mA Segment or DPOperating Temperature Range20 to +100 40 to +100C Storage Temperature Range55 to +100C Reverse Voltage per 3.0V Segment or DPWave Soldering Temperature for250C 3 Seconds (1.60 mm 0.063 in.below Body)Notes:1. See Figu
13、re 5 to establish pulsed conditions.2. Derate above 53C at 0.45 mA/C (see Figure 7).3. See Figure 6 to establish pulsed conditions.4. Derate above 39C at 0.37 mA/C (see Figure 7).5. Derate above 91C at 0.53 mA/C (see Figure 1).Electrical/Optical Characteristics at T A = 25CAlGaAs RedDevice SeriesHDS
14、P-Parameter Symbol Min.Typ.Max.Units Test Conditions A11X Luminous Intensity/Segment1,2I V315600cd I F = 1 mA (Digit Average)3600I F = 5 mAF11X, G11X330650I F = 1 mA3900I F = 5 mAH11X, K11X400700I F = 1 mA4200I F = 5 mAAll Devices Forward Voltage/Segment or DP V F 1.6 2.0V I F = 1 mA1.7I F = 5 mA1.8
15、22I F = 20 mA PeakPeak WavelengthP EAK645nmDominant Wavelength3d637nmReverse Voltage/Segment or DP4V R 3.015V I R = 100 ATemperature Coefficient of?V F/C-2mV/CV F/Segment or DPA11X Thermal Resistance LED RJ-PIN255C/W/Junction-to-Pin Seg.F11X, G11X320H11X, K12X400OrangeDevice SeriesHDSP-Parameter Sym
16、bol Min.Typ.Max.Units Test Conditions A41X Luminous Intensity/Segment I V0.70mcd I F = 5 mA (Segment Average)1,2F41X, G41X 1.0I F = 5 mAH41X, K41X 2.37I F = 10 mAAll Forward Voltage/Segment or DP V F 2.0 2.5V I F = 20 mA DevicesPeak WavelengthPEAK600nmDominant Wavelength3d603nmReverse Voltage/Segmen
17、t or DP4V R 3.030V I R = 100 ATemperature Coefficient of?V F/C2mV/CV F/Segment or DPA41X Thermal Resistance LED RJ-PIN200C/W/Junction-to-Pin Seg.F41X, G41X320H41X, K41X345High Efficiency RedDevice SeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions A21X Luminous Intensity/Segment1,2I V3609
18、80cd I F = 5 mA (Digit Average)5390I F = 20 mAF21X, G21X4201200I F = 5 mAH21X, K21X9002800I F = 10 mA3700I F = 60 mA Peak:1/6 Duty Factor All Forward Voltage/Segment or DP V F 2.0 2.5V I F = 20 mA DevicesPeak WavelengthPEAK635nmDominant Wavelength3d626nmReverse Voltage/Segment or DP4V R 3.030V I R =
19、 100 ATemperature Coefficient of?V F/C-2mV/CV F/Segment or DPA21X Thermal Resistance LED RJ-PIN200C/W/Junction-to-Pin Seg.F21X, G21X320H21X, K21X345High Performance GreenDevice SeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test ConditionsA51X Luminous Intensity/Segment1,2I V8603000cd I F = 10 mA (Di
20、git Average)6800I F = 20 mAF51X, G51X10303500I F = 10 mAH51X, K51X9002500I F = 10 mA3100I F = 60 mA Peak:1/6 Duty FactorAll Forward Voltage/Segment or DP V F 2.1 2.5V I F = 10 mADevicesPeak WavelengthPEAK566nmDominant Wavelength3,5d571577nmReverse Voltage/Segment or DP4V R 3.050V I R = 100 ATemperat
21、ure Coefficient of?V F/C-2mV/CV F/Segment or DPA51X Thermal Resistance LED RJ-PIN200C/W/Junction-to-Pin Seg.F51X, G51X320H51X, G51X345Notes:1. Case temperature of device immediately prior to the intensity measurement is 25C.2. The digits are categorized for luminous intensity. The intensity category
22、 is designated by a letter on the side of the package.3. The dominant wavelength, d, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color ofthe device.4. Typical specification for reference only. Do not exceed absolute maximum ratings.5. Green (HDSP-A51X
23、/F51X/G51X/H512X/K51X) series displays are categorized for dominant wavelength. The category is designated bya number adjacent to the luminous intensity category letter.Figure 3. Relative Luminous Intensity vs. DC Forward Current.Figure 4. Relative Efficiency (LuminousIntensity per Unit Current) vs.
24、 Peak Current.Figure 1. Maximum Allowable Average orDC Current vs. Ambient Temperature.Figure 2. Forward Current vs. Forward Voltage.16024681012142010090807060504030T AMBIENT TEMPERATURE C AI A V E . M A X M A X I M U M A V E R A G E F O R W A R D C U R R E N T P E R S E G M E N T m AF 1201102021F 5
25、0.020.010.05.02.01.00.50.1 0.51.01.52.02.5V FORWARD VOLTAGE VF I F O R W A R D C U R R E N TP E R S E G M E N T m A20105210.50.20.10.10.20.51251020R E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D T O 1 A T 1 m A )I FORWARD CURRENT PER SEGMENT mAF I PEAK FORWARD CURRENTPER SEGME
26、NT mAPEAK R E L A T I V E E F F I C I E N C Y N O R M A L I Z E D T O 1 A T 1 m AP E A K 1.31.21.11.00.90.80.7AlGaAs RedHER, Green, OrangeFigure 7. Maximum Allowable DCCurrent vs. Ambient Temperature.Figure 8. Forward Current vs.Forward Voltage Characteristics.Figure 9. Relative Luminous Intensity v
27、s. DC Forward Current.Figure 10. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current.40051015202530352010090807060504030T AMBIENT TEMPERATURE CA I M A X M A X I M U M D C C U R R E N T P E R S E G M E N T m AD C 1201105045010080604020I F O R W A R D C U R R E N T P E R S E G M
28、 E N T m AF 2.04.03.01.0V FORWARD VOLTAGE VF 05.0P E A K R E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D T O 1 A T 5 m A F O R H E R ,A N D T O 1 A T 10 m A F O R G R E E N )150108642205301025I FORWARD CURRENT PER SEGMENT mAF 0I PEAK FORWARD CURRENTPER SEGMENT mAPEAK P E A K R
29、 E L A T I V E E F F I C I E N C Y (N O R M A L I Z E D T O 1 A T 5 m A F O R H E R ,A N D 10 m A F O R G R E E N )Figure 5. Maximum Tolerable Peak Currentvs. Pulse Duration HER, Orange.Figure 6. Maximum Tolerable Peak Current vs. Pulse Duration Green.R A T I O O F M A X I M U M O P E R A T I N G P
30、E A K C U R R E N T T O T E M P E R A T U R E D E R A T E D D C C U R R E N TI P E A K F I M A X D C t PULSE DURATION sP 101100DC R A T I O O F M A X I M U M O P E R A T I N G P E A K C U R R E N T T O T E M P E R A T U R E D E R A T E D D C C U R R E N TI P E A K FI M A X D C t PULSE DURATION s P 1
31、01100DCHDSP-A1xx IV Bin Category Min.Max.E 0.3150.520F 0.4280.759G 0.621 1.16H 0.945 1.71I 1.40 2.56J 2.10 3.84K 3.14 5.75L 4.708.55Intensity Bin Limits (mcd)AlGaAs RedHDSP-F1xx/G1xx IV Bin Category Min.Max.D 0.3910.650E 0.5320.923F 0.755 1.39G 1.13 2.08H 1.703.14HDSP-H1xx/K1xx IV Bin Category Min.M
32、ax.C 0.4150.690D 0.5650.990E 0.810 1.50F 1.20 2.20G 1.80 3.30H 2.73 5.00I 4.097.50OrangeHDSP-A41XIV Bin Category MinMaxA 0.2840.433B 0.3540.541C 0.4430.677D 0.5540.846E 0.692 1.057F 0.856 1.322G 1.082 1.652H 1.352 2.066I 1.692 2.581J 2.114 3.227K 2.641 4.034L 3.300 5.042M 4.127 6.303N 5.1577.878HDSP
33、-F41X/G41XIV Bin Category MinMaxC 0.4850.890D 0.728 1.333E 1.091 2.000F 1.636 3.000G 2.454 4.500H 3.6826.751HDSP-H41X/K41XIV Bin Category MinMaxB 0.77 1.17C 0.95 1.45D 1.19 1.82E 1.49 2.27F 1.85 2.89G 2.32 3.54H 2.904.43Intensity Bin Limits (mcd), continued HERMin.Max.B0.3420.630C0.5160.946D0.774 1.
34、418E 1.160 2.127F 1.740 3.190G 2.610 4.785H 3.9157.177Min.Max.C0.4850.890D0.728 1.333E 1.091 2.000F 1.636 3.000G 2.454 4.500H 3.682 6.751Min.Max.E0.91 1.67F 1.37 2.51G 2.05 3.76H 3.08 5.64I 4.628.64J 6.9312.70K10.3919.04Contrast EnhancementFor information on contrast enhancement, please see Applicat
35、ion Note 1015.Soldering/CleaningFor information on soldering LEDs, please refer to Application Note 1029.Electrical/OpticalFor more information onelectrical/optical characteristics,please see Application Note 1005.Color CategoriesNote:All categories are established for classification of products. Pr
36、oducts may not be available in all categories. Please contact your Agilent representatives for further clarification/information.HDSP-A5xx IV Bin Category Min.Max.H 0.86 1.58I 1.29 2.37J 1.94 3.55K 2.90 5.33L 4.378.01Intensity Bin Limits (mcd), continued GreenHDSP-F5xx/G5xx IV Bin Category Min.Max.H
37、 1.54 2.82I 2.31 4.23J 3.46 6.34K 5.189.50L 7.7814.26HDSP-H5xx/K5xx IV Bin Category Min.Max.E 0.91 1.67F 1.37 2.51G 2.05 3.76H 3.08 5.64I 4.618.46http:/ For product information and a complete list of distributors, please go to our web site.For technical assistance call:Americas/Canada: +1 (800) 235-
38、0312 or (916) 788-6763Europe: +49 (0) 6441 92460China: 10800 650 0017Hong Kong: (+65) 6756 2394India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152 (Domestic/Interna-tional), or 0120-61-1280 (Domestic Only) Korea: (+65) 6755 1989Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843Data subject to change.Copyright ? 2004 Agilent Technologies, Inc. Obsoletes 5988-1742ENJuly 17, 20045988-4433EN