《Concrete Stamping and Stenciling Systems：具体的冲压和制版系统.doc》由会员分享，可在线阅读，更多相关《Concrete Stamping and Stenciling Systems：具体的冲压和制版系统.doc（7页珍藏版）》请在三一文库上搜索。
1、Legacy Decorative Concrete Systems, Inc.July 20073421 Lumber LaneSpringfield, Illinois 62707Toll Free(866) 684-9394Phone(217) 522-6737Fax(866) 684-9395WE-Product Guide SpecificationSpecifier Notes: This product guide specification is written according to the Construction Specifications Institute (CS
2、I) 3-Part Format, including MasterFormat, SectionFormat, and PageFormat, as described in The Project Resource ManualCSI Manual of Practice, Fifth Edition.The section must be carefully reviewed and edited by the Architect to meet the requirements of the project and local building code. Coordinate thi
3、s section with other specification sections and the Drawings. Delete all “Specifier Notes” after editing this section.Section numbers are from MasterFormat 1995 Edition, with numbers from MasterFormat 2004 Edition in parentheses. Delete version not required.SECTION 03360 (03 35 33)CONCRETE STAMPING
4、STENCILING SYSTEMSpecifier Notes: This section covers Legacy Decorative Concrete Systems, Inc. “Impressions” concrete stamping system and “FauxCrete” concrete stenciling system. Both systems create colors and patterns into freshly placed horizontal concrete surfaces. Consult Legacy Decorative Concre
5、te Systems, Inc. for assistance in editing this section for the specific application.Use section number 03360 (03 35 33) when specifying “Impressions” concrete stamping system. Use section number 03360 (03 35 36) when specifying “FauxCrete” concrete stenciling system.PART 1GENERAL1.1SECTION INCLUDES
6、Specifier Notes: Throughout this product guide specification, use “concrete stamping system” when specifying “Impressions” and use “concrete stenciling system” when specifying “FauxCrete”.Specify one of the following decorative concrete systems.A.Decorative concrete stamping system.B.Decorative conc
7、rete stenciling system.1.2RELATED SECTIONSSpecifier Notes: Edit the following list of related sections as required for the project. List other sections with work directly related to this section.A.Section 03300 (03 30 00) Cast-in-Place Concrete.1.3REFERENCESSpecifier Notes: List standards referenced
8、 in this section, complete with designations and titles. This article does not require compliance with standards, but is merely a listing of those used.A.ASTM C 979 Standard Specification for Pigments for Integrally Colored Concrete.1.4SUBMITTALSA.Comply with Section 01330 (01 33 00) Submittal Proce
9、dures.B.Product Data: Submit manufacturers product data, including application instructions.C.Samples: Submit manufacturers samples of standard colors.D.Manufacturers Certification: Submit manufacturers certification that materials comply with specified requirements and are suitable for intended app
10、lication.E.Applicators Project References: Submit applicators list of successfully completed concrete stamping concrete stenciling projects, including project name and location, name of architect, and type and quantity of materials applied.1.5QUALITY ASSURANCEA.Applicators Qualifications:1.Applicato
11、r regularly engaged, for preceding 5 years, in application of concrete stamping systems concrete stenciling systems of similar type to that specified.2.Employ persons trained for application of concrete stamping systems concrete stenciling systems.Specifier Notes: Edit the following paragraph for mo
12、ck-ups as required for the project.B.Mock-ups:1.Construct mock-ups of concrete stamping system concrete stenciling system and illustrating floor finishes, using same materials for use in the Work.2.Construct mock-ups at location determined by Architect.3.Construct mock-ups a minimum size of 48 inche
13、s by 48 inches.4.Receive approval of mock-ups by Architect for patterns, colors, textures, special effects, and workmanship before application of concrete stamping system concrete stenciling system.5.Approved mock-ups will be the standard for patterns, colors, textures, special effects, and workmans
14、hip of concrete stamping system concrete stenciling system.Specifier Notes: Edit pre-application meeting as required for the project.C.Pre-application Meeting:1.Convene pre-application meeting before start of application of concrete stamping system concrete stenciling system.2.Require attendance of
15、parties directly affecting work of this section, including Contractor, Architect, applicator, and manufacturers representative.3.Review preparation, application, protection, and coordination with other work.1.6DELIVERY, STORAGE, AND HANDLINGA.Delivery: Deliver materials to site in manufacturers orig
16、inal, unopened containers and packaging, with labels clearly identifying product name and manufacturer.B.Storage:1.Store materials in clean, dry area indoors in accordance with manufacturers instructions.2.Store out of direct sunlight.3.Keep from freezing.C.Handling: Protect materials during handlin
17、g and application to prevent contamination or damage.1.7ENVIRONMENTAL REQUIREMENTSA.Do not apply concrete stamping system concrete stenciling system when air or surface temperatures are below 40 degrees F (4 degrees C) or above 90 degrees F (32 degrees C) during application or within 24 hours after
18、application.B.Do not apply concrete stamping system concrete stenciling system when rain, snow, or excessive moisture is expected during application or within 24 hours after application.PART 2PRODUCTS2.1MANUFACTURERA.Legacy Decorative Concrete Systems, Inc., 3421 Lumber Lane, Springfield, Illinois 6
19、2707. Toll Free (866) 684-9394. Phone (217) 522-6737. Fax (866) 684-9395. Website . E-mail .2.2MATERIALSSpecifier Notes: Specify “Impressions” concrete stamping system or “FauxCrete” concrete stenciling system. Delete system not required. Consult Legacy Decorative Concrete Systems, Inc. for more inf
20、ormation.A.Concrete Stamping System: “Impressions”.Specifier Notes: Specify required components of “Impressions” concrete stamping system. Delete components not required. Consult Legacy Decorative Concrete Systems, Inc. for more information.1.Cementitious Dry-Shake Material: “Colour-Hard”.Specifier
21、Notes: Specify required colors. Delete colors not required.a.Color: Antique White Ash White Autumn Black Bluestone Bone Brick Red Canyon Red Charcoal Coronado Cream Beige Desert Tan Federal Red Federal Yellow Light Grey Mesa Nutmeg Pecan Plum Quarry Red Rust Saddle Brown Sage Sand Shadow Slate Stone
22、 Grey Terra Cotta Venetian Pink.2.Liquid Integral Color: “ColorFlo”.a.Conformance: ASTM C 979.Specifier Notes: Specify required colors. “ColorFlo” is available in 64 liquid integral colors or custom-color options. Consult Legacy Decorative Concrete Systems, Inc. for more information.b.Color: _ .3.Pi
23、gmented Dry-Powder Release: “Accent-Colour Release”.Specifier Notes: Specify required colors. Delete colors not required.a.Color: Antique White Ash White Autumn Black Bluestone Bone Brick Red Canyon Red Charcoal Coronado Cream Beige Desert Tan Federal Red Federal Yellow Light Grey Mesa Nutmeg Pecan
24、Plum Quarry Red Rust Saddle Brown Sage Sand Shadow Slate Stone Grey Terra Cotta Venetian Pink.4.Liquid Release: “Accent-Liquid Release”.5.Tooling: Mat-type imprinting tools.Specifier Notes: Specify required patterns. Mat-type imprinting tools are available in a large number of patterns. Consult Lega
25、cy Decorative Concrete Systems, Inc. for more information.a.Pattern: _ .6.Concrete Stain: “Fresco Stain” “Tinte DAcqua”.Specifier Notes: Specify required colors. Delete colors not required. Special colors and effects can be produced by using one or more applications, blending two or more colors, ble
26、nding “Fresco Stain” with “Fresco Stain Plus”, or blending “Tinte DAcqua” with water.a.“Fresco Stain” Colors: Amber Aspen Caribbean Clay Copper Forest Green Hickory Peppercorn.b.“Tinte DAcqua” Colors: Aged Bronze Aged Patina Antebellum Aqua Baltic Bernado Black Breccia Canyon Coral Red Dried Basil E
27、ssence Granada Granite Gulf Magnet Mediterranean Metalica Orange Patina Pewter Roma Taiga Brown Terra Tomatillo Tuscan Venetian Clay Walnut.7.Concrete Sealer:Specifier Notes: Specify one of the following five concrete sealers as required to achieve the desired finish. Consult Legacy Decorative Concr
28、ete Systems, Inc. for more information.a.High-Gloss Finish, Interior or Exterior Use: “Premium Seal VOC 100”.b.Gloss Finish, Interior or Exterior Use: “Signature Seal VOC”.c.Low to Medium-Gloss Finish, Interior or Exterior Use: “Magnum Seal”.d.Low-Sheen, Matte Finish, Interior or Exterior Use: “Aqua
29、Clear VOC”.e.Satin Finish, Interior or Exterior Use: “Signature Satin 400”.B.Concrete Stenciling System: “FauxCrete”.Specifier Notes: Specify required components of “FauxCrete” concrete stenciling system. Delete components not required. Consult Legacy Decorative Concrete Systems, Inc. for more infor
30、mation.1.Cementitious Dry-Shake Material: “Colour-Hard”.Specifier Notes: Specify required colors. Delete colors not required.a.Color: Antique White Ash White Autumn Black Bluestone Bone Brick Red Canyon Red Charcoal Coronado Cream Beige Desert Tan Federal Red Federal Yellow Light Grey Mesa Nutmeg Pe
31、can Plum Quarry Red Rust Saddle Brown Sage Sand Shadow Slate Stone Grey Terra Cotta Venetian Pink.2.Liquid Integral Color: “ColorFlo”.a.Conformance: ASTM C 979.Specifier Notes: Specify required colors. “ColorFlo” is available in 64 liquid integral colors or custom-color options. Consult Legacy Decor
32、ative Concrete Systems, Inc. for more information.b.Color: _ .3.Pigmented Dry-Powder Release: “Accent-Colour Release”.Specifier Notes: Specify required colors. Delete colors not required.a.Color: Antique White Ash White Autumn Black Bluestone Bone Brick Red Canyon Red Charcoal Coronado Cream Beige D
33、esert Tan Federal Red Federal Yellow Light Grey Mesa Nutmeg Pecan Plum Quarry Red Rust Saddle Brown Sage Sand Shadow Slate Stone Grey Terra Cotta Venetian Pink.4.Stencils: “FauxCrete”.a.22-mil-thick, water-resistant, plastic-coated, fiberboard pattern stencils.Specifier Notes: Specify required patte
34、rns. Delete patterns not required.b.Pattern: Ashlar Slate Basketweave Brick Cobblestone Header Diamond Tile Face Brick Fishscale Flagstone Herringbone Brick Large Cobblestone Circle Mock Herringbone Brick Old Chicago Brick Old English Cobblestone Pinwheel Runningbond Brick Rustic Brick Silverdale Sm
35、all Cobblestone Circle Soldier Course Brick Stacked Bond Brick Vertical Face Brick.5.Concrete Stain: “Fresco Stain” “Tinte DAcqua”.Specifier Notes: Specify required colors. Delete colors not required. Special colors and effects can be produced by using one or more applications, blending two or more
36、colors, blending “Fresco Stain” with “Fresco Stain Plus”, or blending “Tinte DAcqua” with water.a.“Fresco Stain” Colors: Amber Aspen Caribbean Clay Copper Forest Green Hickory Peppercorn.b.“Tinte DAcqua” Colors: Aged Bronze Aged Patina Antebellum Aqua Baltic Bernado Black Breccia Canyon Coral Red Dr
37、ied Basil Essence Granada Granite Gulf Magnet Mediterranean Metalica Orange Patina Pewter Roma Taiga Brown Terra Tomatillo Tuscan Venetian Clay Walnut.6.Concrete Sealer:Specifier Notes: Specify one of the following five concrete sealers as required to achieve the desired finish. Consult Legacy Decor
38、ative Concrete Systems, Inc. for more information.a.High-Gloss Finish, Interior or Exterior Use: “Premium Seal VOC 100”.b.Gloss Finish, Interior or Exterior Use: “Signature Seal VOC”.c.Low to Medium-Gloss Finish, Interior or Exterior Use: “Magnum Seal”.d.Low-Sheen, Matte Finish, Interior or Exterior
39、 Use: “AquaClear VOC”.e.Satin Finish, Interior or Exterior Use: “Signature Satin 400”.PART 3EXECUTION3.1EXAMINATIONA.Examine surfaces to receive concrete stamping system concrete stenciling system.B.Notify Architect of conditions that would adversely affect application.C.Do not begin application unt
40、il unacceptable conditions are corrected.3.2PREPARATIONA.Protect adjacent areas, adjoining walls, and landscaping from contact with concrete stamping system concrete stenciling system.3.3APPLICATIONA.Apply concrete stamping system concrete stenciling system in accordance with manufacturers instructi
41、ons at locations indicated on the Drawings.B.Form and place concrete as specified in Section 03300 (03 30 00).C.Match approved mock-ups for patterns, colors, textures, special effects, and workmanship.D.Concrete Sealer:1.Apply concrete sealer in accordance with manufacturers instructions after subst
42、rate has thoroughly dried.2.Uniformly apply concrete sealer over entire surface.3.4PROTECTIONA.Protect completed concrete stamping system concrete stenciling system application from:1.Rain, Snow, and Excessive Moisture: Minimum of 24 hours.2.Foot Traffic: Minimum of 24 hours.3.Vehicle Traffic: Minimum of 72 hours.B.Protect applied concrete stamping system concrete stenciling system from damage during construction.END OF SECTION