《BS EN 3155-002-2006 航空航天系列.接触部件用电接触器.第002部分电接触器的列表和应用.pdf》由会员分享，可在线阅读，更多相关《BS EN 3155-002-2006 航空航天系列.接触部件用电接触器.第002部分电接触器的列表和应用.pdf（10页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 3155-002:2006 Aerospace series Electrical contacts used in elements of connection Part 002: List and utilization of contacts The European Standard EN 3155-002:2006 has the status of a British Standard ICS 49.060 BS EN 3155-002:2006 This British Standard was published under the
2、 authority of the Standards Policy and Strategy Committee on 31 October 2006 BSI 2006 ISBN 0 580 49461 6 National foreword This British Standard was published by BSI. It is the UK implementation of EN 3155-002:2006. The UK participation in its preparation was entrusted by Technical Committee ACE/6,
3、Aerospace avionic electrical and fibre optic technology, to Subcommittee ACE/6/-/3, Aerospace Connectors. A list of organizations represented on ACE/6/-/3 can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are r
4、esponsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments W - - - - - - - - - 7 7- - 7- -7- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
5、W W D - - w - - - - 2 Contents Page Foreword3 1 Scope 4 2 Normative references4 3 List of contacts 5 EN 3155-002:2006 3 Foreword This European Standard (EN 3155-002:2006) has been prepared by the AeroSpace and Defense Industries Association of Europe - Standardization (ASD-STAN). After enquiries and
6、 votes carried out in accordance with the rules of this Association, this Standard has re- ceived the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national stand
7、ard, either by publication of an identical text or by endorsement, at the latest by January 2007, and conflicting national standards shall be withdrawn at the latest by January 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights.
8、 CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
9、 Den- mark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxem- bourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzer- land and the United Kingdom. EN 3155-002:2006 4 1 Scope This standard provides
10、a list of removable crimped contacts as defined in the product standards, with wrapped or soldered connections etc. for use in connectors or other electrical elements of connection. It shows the elements of connection in which they are used. 2 Normative references The following referenced documents
11、are indispensable for the application of this document. For dated refer- ences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2593-001, Aerospace series Bases for 10 A plug-in relays, two and four poles Pa
12、rt 001: Technical specification 1) EN 2997-001, Aerospace series Connectors, electrical, circular, coupled by threaded ring, operating tem- peratures 175 C continuous, 200 C continuous, 260 C peak and fire resistant Part 001: Technical speci- fication1) EN 3205-001, Aerospace series Bases for five p
13、lug-in relays, two and four poles Part 001: Technical specification1) EN 3206-001, Aerospace series Bases for electromagnetic relays, one and three poles Part 001: Tech- nical specification1) EN 3218-001, Aerospace series Connector, rectangular, metallic shells, screw-locking Part 001: Techni- cal s
14、pecification 1) EN 3372-001, Aerospace series Circular electrical connectors, medium and high density, scoop-proof with bayonet coupling, 175 C and 200 C Part 001: Technical specification 1) EN 3545-001, Aerospace series Connectors, rectangular, with sealed and non-sealed rear, plastic housing, lock
15、ing device and operating temperatures 55 C to 175 C Part 001: Technical specification 1) EN 3708-001, Aerospace series Modular interconnection system Part 001: Technical specification1) EN 6047-001, Aerospace series Connectors, electrical, circular, coupled by threaded ring, for high current, operat
16、ing temperature 200 C continuous and fire-resistant Part 001: Technical specification 1) EN 2995-001, Aerospace series Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A Part 001: Technical specification 1) EN 2996-001, Aerospace series Circuit breakers, three-pole, te
17、mperature compensated, rated current 1 A to 25 A Part 001: Technical specification 1) EN 3155-001, Aerospace series Electrical contacts used in elements of connection Part 001: Technical specification1) EN 3645-001, Aerospace series Connectors, electrical, circular, scoop-proof, triple start threade
18、d coupling, operating temperatures 175 C or 200 C Part 001: Technical specification 1) EN 3646-001, Aerospace series Connectors, electrical, circular, bayonet coupling, operating temperature 175 C or 200 C continuous Part 001: Technical specification 1) EN 3682-001, Aerospace series Connectors, plug
19、 and receptacle, electrical, rectangular, interchangeable inserts, rack to panel, operating temperature 150 C continuous Part 001: Technical specification 1) EN 4067-001, Aerospace series Connectors, electrical, circular, scoop-proof, coupled by threaded ring, operating temperatures 260 C peak Part
20、001: Technical specification1) 1) Published as ASD Pre-standard at the date of publication of this standard. EN 3155-002:2006 5 3 List of contacts See Table 1. Table 1 Contacts Elements of connection Types Relay base Circuit breakers Connectors Designation EN 3155 003F2222 200 X X 003F2022 a 200 X X
21、 003F2020 200 X X 003F2018 200 X X 003F1616 200 X X 003F1614 200 X X 003F1214 200 X X 003F1212 200 X X 003F1010 200 X X 004M2020 260 X X 004M2018 260 X X 004M1616 260 X X 004M1614 260 X X 004M1618 260 X X 004M1212 260 X X 005F2020 260 X X 005F2018 260 X X 005F1616 260 X X 005F1614 260 X X 005F1618 2
22、60 X X 005F1212 260 X X 006M2226 150 X X 006M2222 150 X X 006M2220 150 X X 007F2226 150 X X 007F2222 150 X X 007F2220 150 X X 008M2222 200 X X X X 008M2020 200 X X X 008M2018 200 X X X X 008M1616 200 X X X X 008M1614 200 X X X X 008M1214 200 X X X X 008M1212 200 X X X X 008M1010 200 X X 008F2022 a 2
23、00 X X X X 009F2222 200 X X X 009F2022 a 200 X X X 009F2020 200 X X X 009F2018 200 X X X 009F1616 200 X X X 009F1614 200 X X X 009F1214 200 X X X 009F1212 200 X X X 009F1010 200 X X 010M08 b 150 X X X X EN 3155-002:2006 6 Table 1 (continued) Contacts Elements of connection Types Relay base Circuit b
24、reakers Connectors Designation EN 3155- 011F08 b 150 X X X X 012M08 b 200 X X X X 013F08 b 200 X X X X 014M2020 200 X X 014M2018 200 X X 015F2020 200 X X 015F2018 200 X X 016M2222 200 X X 016M2020 200 X X X X 016M2018 200 X X X X 016M1616 200 X X X X 016M1212 200 X X X X 017F1620 125 X X 017F1616 12
25、5 X X 017F1216 125 X X 017F1212 125 X X 018M2022 200 X X X 018M2020 200 X X X 018M2018 200 X X X 018M1616 200 X X X 018M1614 200 X X X 018M1618 200 X X X 018M1212 200 X X X 018M1218 200 X X X 019F2022 a 200 X X X 019F2020 200 X X X 019F2018 200 X X X 019F1616 200 X X X 019F1614 200 X X X 019F1618 20
26、0 X X X 019F1212 200 X X X 019F1218 200 X X X 020M10 b 150 X X X 021F10 b 150 X X X 022M2220 150 X X 023F2220 150 X X 024M08 b 150 X X X X 025F08 b 150 X X X X 026M2222 150 X X 026M2020 150 X X 026M1616 150 X X 026M1212 150 X X 027F2222 150 X X 027F2022 a 150 X X 027F2020 150 X X 027F1616 150 X X 02
27、7F1212 150 X X 028M16 b 150 X X X 029F16 b 150 X X X 030M12 b 150 X X X 031F12 b 150 X X X EN 3155-002:2006 7 Table 1 (concluded) Contacts Elements of connection Types Relay base Circuit breakers Connectors Designation EN 3155- 032M05 b 150 X X X 033F05 b 150 X X X 034M08 b 150 X X X 035F08 b 150 X
28、X X 036F22 150 X X 039F16 b 150 X X X 040M12 b 150 X X X 041F12 b 150 X X X 042M08 b 150 X X X 043F08 b 150 X X X 044M2022 260 X X 045F2022 260 X X 046M2022 200 X X 047F2022 200 X X 052M4A2A 200 X X 053F4A2A 200 X X 054M2020 260 X X X 054M2018 260 X X X 054M1616 260 X X X 054M1618 260 X X X 055F2020
29、 260 X X X 055F2018 260 X X X 055F1616 260 X X X 055F1618 260 X X X 055M2020 260 X X X 056M2018 260 X X X 056M1616 260 X X X 056M1618 260 X X X 057F2020 260 X X X 057F2018 260 X X X 057F1616 260 X X X 057F1618 260 X X X 058M16 b 150 X X X X 059F16 b 150 X X X X 060M12 b 150 X X X X 062F12 b 150 X X
30、X X 062F2020 a 125 X X a In preparation b Cable code and delivery code: refer to product standard EN 3155-002:2006 BS EN 3155-002:2006 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It prese
31、nts the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI
32、 to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 89
33、96 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Custome
34、r Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British St
35、andards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details
36、on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these
37、 and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI
38、 website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a
39、retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 707