《ANSI-INCITS-303-1998-R2003.pdf》由会员分享，可在线阅读，更多相关《ANSI-INCITS-303-1998-R2003.pdf（116页珍藏版）》请在三一文库上搜索。
1、ANSI INCITS 303-1998 (R2003) (formerly ANSI X3.303-1998) for Information Technology Fibre Channel Physical and Signalling Interface-3 (FC-PH-3) Copyright American National Standards Institute Provided by IHS under license with ANSI Licensee=IHS Employees/1111111001, User=OConnor, Maurice Not for Res
2、ale, 04/29/2007 13:14:25 MDTNo reproduction or networking permitted without license from IHS -,-,- Copyright American National Standards Institute Provided by IHS under license with ANSI Licensee=IHS Employees/1111111001, User=OConnor, Maurice Not for Resale, 04/29/2007 13:14:25 MDTNo reproduction o
3、r networking permitted without license from IHS -,-,- Abstract This standard describes the enhancement to the ANSI X3.230, Fibre Channel Physical and Signalling In- terface (FC-PH) and to the ANSI X3.297, Fibre Channel Physical and Signalling Interface - 2 (FC-PH-2) and is an addendum to both these
4、documents. American National Standard for Information Technology Fibre Channel Physical and Signalling Interface-3 (FC-PH-3) ANSI X3.303-1998 Secretariat Information Technology Industry Council Approved April 3, 1998 American National Standards Institute, Inc. Copyright American National Standards I
5、nstitute Provided by IHS under license with ANSI Licensee=IHS Employees/1111111001, User=OConnor, Maurice Not for Resale, 04/29/2007 13:14:25 MDTNo reproduction or networking permitted without license from IHS -,-,- Approval of an American National Standard requires verification by ANSI that the req
6、uirements for due process, consensus, and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgement of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantial agr
7、eement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made towards their resolution. The use of American National Standards is completely voluntary; their existence does not in any
8、respect preclude anyone, whether he has approved the standards or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. The American National Standards Institute does not develop standards and will in no circumstances give interp
9、retation on any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute. Requests for interpretations should be addressed to the secretariat or sponsor whose
10、 name appears on the title page of this standard. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers
11、of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute. American National Standard Published by American National Standards Institute, Inc. 11 West 42nd Street, New York, NY 10036 Copyright 1998 by Information T
12、echnology Industry Council (ITI) All rights reserved. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without prior written permission of the publisher. Printed in the United States of America insert code here CAUTION: The developers of this
13、 standard have requested that holders of patents that may be required for the implementation of the standard disclose such patents to the publisher. However, neither the developers nor the publisher have undertaken a patent search in order to identify which, if any, patents may apply to this standar
14、d. As of the date of publication of this standard and following calls for the identification of patents that may be required for the implementation of the standard, no such claims have been made. No further patent search is conducted by the developer or publisher in respect to any standard it pro- c
15、esses. No representation is made or implied that licenses are not required to avoid infringement in the use of this standard. Copyright American National Standards Institute Provided by IHS under license with ANSI Licensee=IHS Employees/1111111001, User=OConnor, Maurice Not for Resale, 04/29/2007 13
16、:14:25 MDTNo reproduction or networking permitted without license from IHS -,-,- i Contents Page Foreword.vi Introduction .ix 1 Scope. 1 2 Normative references. 1 3 Definitions and conventions. 2 4 Structure and concepts 3 5 FC-0 functional characteristics. 4 6 Optical fibre interface specification
17、4 7 Electrical cable interface specification 5 8 Optical fibre cable plant specification. 17 9 Electrical cable plant specification . 17 10 Optical interface connector specification 20 11 FC-1 8B/10B Transmission Code 20 12 FC-1 receiver and transmitter description 20 13 Loopback mode 20 14 Diagnost
18、ic mode 20 15 Transmitter safety 20 16 Ordered sets 20 17 Frame formats 20 18 Frame_Header. 21 19 Optional headers 27 20 Data frames and responses. 30 21 Link Services 31 22 Classes of Service . 40 23 Login and Service Parameters 42 24 Exchange, Sequence, and sequence count management. 56 25 Associa
19、tion Header management and usage 58 26 Flow control management 58 27 Segmentation and reassembly. 58 28 Connection management. 58 29 Error detection and recovery 62 30 Hunt Group. 63 31 Multicast. 63 32 Aliases 66 Copyright American National Standards Institute Provided by IHS under license with ANS
20、I Licensee=IHS Employees/1111111001, User=OConnor, Maurice Not for Resale, 04/29/2007 13:14:25 MDTNo reproduction or networking permitted without license from IHS -,-,- ii Page 33 Dedicated Simplex. 66 34 Class 4 - Fractional 66 35 Camp-On 66 36 Stacked Connect Request . 66 37 Buffered Class 1 Servi
21、ce 66 38 Data Compression . 66 39 Clock synchronization service 67 40 Data Encryption 73 Tables 10 FC-0 physical links for electrical cable classes . 5 11 Eye diagram mask at point-S 11 12 Eye diagram mask at point-R 9 . 12 13 Optional inter-enclosure contact uses. 15 14 LV-style cable plant. 17 15
22、TV-style cable plant. 17 16 MI-style cable plant 18 17 TP-style cable plant. 19 18 TW-style cable plant 19 33 Well-known Address identifiers . 21 36 Type codes - FC-4 (Device_Data and Link_Data). 21 37 (Page 1 of 2) - F_CTL field 22 36C Data encryption status 24 40 DF_CTL bit definition 25 160 Prior
23、ity/Preemption enabled 25 161 Priority/Preemption not enabled 25 41 NAA identifiers 28 45 Association_Header Validity bits (Bits 63-56). 29 53 P_BSY Reason Codes 30 55 P_RJT or F_RJT Reason Codes. 30 57 Basic Link Service Commands 31 61 Extended Link Service Commands . 32 162 RTV Payload . 34 163 RT
24、V Accept Payload . 34 91 LS_RJT reason code explanation 35 164 RNC/ACC Payload 36 Copyright American National Standards Institute Provided by IHS under license with ANSI Licensee=IHS Employees/1111111001, User=OConnor, Maurice Not for Resale, 04/29/2007 13:14:25 MDTNo reproduction or networking perm
25、itted without license from IHS -,-,- iii Page 165 Capability Entry37 166 Document Identifiers38 94 Responses to FLOGI frame (S_ID = 0 or 0000yy) - Fabric Login43 98 N_Port Common Service Parameter Applicability .45 99 FC-PH-3 Version .46 101 N_Port Class Service Parameter Applicability.49 103 Exchan
26、ge Status Block57 104 Sequence Status Block57 111A Responses to Preemption Requests.61 167 CSS_CC Payload 71 168 CSS_CC Accept Payload 71 169 Data Character Translation72 170 CSS_SC Payload 72 171 CSS_SC Accept Payload 73 Figures Document relationship. x 110 Fabric Regions.3 111 FC-4 Regions.4 27 Ex
27、ample inter-enclosure TxRx connection with 75 unbalanced cable7 112 Example of compliance point locations and TxRx connections.8 113Inter-enclosure transmitter compliance points.9 114Inter-enclosure receiver compliance points .9 115Intra-enclosure transmitter compliance points.10 116Intra-enclosure
28、receiver compliance points .10 28Unbalanced transmitter equivalent test load10 29Normalized eye diagram mask at point-S11 30Absolute eye diagram mask at point-S11 31Eye diagram mask at point-R9 .12 32Example inter-enclosure TxRx connection with 150 balanced cable13 33Balanced transmitter equivalent
29、test load13 34Style-1 balanced connector receptacle pin locations.14 35Style-2 plug and receptacle .14 36Style-2 balanced connector receptacle pin locations.15 117Intra-enclosure integral FC device connector16 Copyright American National Standards Institute Provided by IHS under license with ANSI Li
30、censee=IHS Employees/1111111001, User=OConnor, Maurice Not for Resale, 04/29/2007 13:14:25 MDTNo reproduction or networking permitted without license from IHS -,-,- iv Page 118Contact numbering for integral FC device connector 16 37Balanced cable wiring 19 47Optional headers order 27 48IEEE Register
31、ed 28 49IEEE registered format 28 52Association_Header 29 59FLOGI, PLOGI, or ACC Payload. 44 60N_Port Common Service Parameters - Fabric Login 46 61N_Port Common Service Parameters - N_Port Login. 47 62N_Port Class Service Parameters - Fabric Login 50 62aN_Port Class Service Parameters - N_Port Logi
32、n. 51 67F_Port Common Service Parameters - Fabric Login. 53 67aF_Port Class Service Parameters - Fabric Login 54 89aClass 6 Multicast Routing 63 89bClass 3 Multicast Routing 65 119Clock Synchronization Model 67 120Real Time Loop Topology . 84 121Real Time Protocol Stack 85 122Failure Detect and Re-r
33、outing . 85 123TDM Window. 86 124FC-PH IEEE 48-bit identifier 99 125 FC-PH IEEE 48-bit identifier example 99 126FC-PH IEEE extended identifier 100 127 FC-PH IEEE extended identifier example 100 128FC-PH IEEE registered identifier. 101 129IEEE registered identifier example 101 Index . 102 Annexes ANo
34、 enhancements to X3.230-1994 (FC-PH) 74 BNo enhancements to X3.230-1994 (FC-PH) 74 CNo enhancements to X3.230-1994 (FC-PH) 74 DNo enhancements to X3.230-1994 (FC-PH) 74 ENo enhancements to X3.230-1994 (FC-PH) 74 FElectrical cable interface implementation examples. 75 GNo enhancements to X3.230-1994
35、(FC-PH) 79 Copyright American National Standards Institute Provided by IHS under license with ANSI Licensee=IHS Employees/1111111001, User=OConnor, Maurice Not for Resale, 04/29/2007 13:14:25 MDTNo reproduction or networking permitted without license from IHS -,-,- v Page HNo enhancements to X3.230-
36、1994 (FC-PH).79 INo enhancements to X3.230-1994 (FC-PH).79 JNo enhancements to X3.230-1994 (FC-PH).79 KNo enhancements to X3.230-1994 (FC-PH).79 LNo enhancements to X3.230-1994 (FC-PH).79 MNo enhancements to X3.230-1994 (FC-PH).79 NNo enhancements to X3.230-1994 (FC-PH).79 ONo enhancements to X3.230
37、-1994 (FC-PH).79 PNo enhancements to X3.230-1994 (FC-PH).79 QNo enhancements to X3.230-1994 (FC-PH).80 RNo enhancements to X3.230-1994 (FC-PH).80 SFC-PH Service interface.81 TNo enhancements to X3.230-1994 (FC-PH).83 UNo enhancements to X3.230-1994 (FC-PH).83 VNo enhancements to X3.230-1994 (FC-PH).
38、83 WNo enhancements to X3.230-1994 (FC-PH).83 XNo enhancements to X3.230-1994 (FC-PH).83 YNo enhancements to X3.230-1994 (FC-PH).83 ZNo enhancements to X3.230-1994 (FC-PH).83 AANo enhancements to X3.230-1994 (FC-PH).83 BBNo enhancements to X3.230-1994 (FC-PH).83 CCA Real Time Loop Based Fibre Channe
39、l Topology 84 DDPriority and Preemption 93 EEReport Node Capabilities (RNC).95 FFTutorial for IEEE Registered.98 Copyright American National Standards Institute Provided by IHS under license with ANSI Licensee=IHS Employees/1111111001, User=OConnor, Maurice Not for Resale, 04/29/2007 13:14:25 MDTNo
40、reproduction or networking permitted without license from IHS -,-,- vi Foreword (This foreword is not part of American National Standard X3.303-1998.) This Fibre Channel, Physical and Signalling Interface - 3 standard (FC-PH-3) de- scribes the enhancements to the ANSI X3.230 FC-PH and X3.297 FC-PH-2
41、 and is an extension to both these documents. This standard was developed by Task Group X3T11 of Accredited Standards Com- mittee X3 during 1995-6. The standards approval process started in 1996. This stan- dard includes annexes, which are informative, and are not considered part of the standard. Th
42、is document is an extension to the FC-PH and FC-PH-2 standards and follows the same numbering scheme for clauses, subclauses, figures, and tables. Therefore, all clauses, subclauses, figures, and tables which are already defined in FC-PH or FC- PH-2 and are modified by FC-PH-3 have the same numberin
43、g as their original defini- tion in those documents. The number of clauses, subclauses, figures, and tables which are unique to FC-PH-3 starts up from the last such item defined in FC-PH-2. For example, Figure 27 in Clause 7 appears in FC-PH, so it retains the same number in FC-PH-3. However, Figure
44、 110 in Clause 4 is unique to FC-PH-3, so it has the next number after the last figure in FC-PH-2. Requests for interpretation, suggestions for improvement or addenda, or defect re- ports are welcome. They should be sent to the National Committee for Information Technology (NCITS), 1250 Eye Street,
45、NW, Suite 200, Washington, DC 20005. This standard was processed and approved for submittal to ANSI by NCITS. Com- mittee approval of the standard does not necessarily imply that all committee mem- bers voted for approval. At the time it approved this standard, NCITS had the following members: Karen
46、 Higginbottom, Chair (Acting) Karen Higginbottom, Vice-Chair Monica Vago, Secretary Organization RepresentedName of Representative AMP, IncJohn Hill Charles Brill (Alt.) Apple Computer, IncDavid K. Michael Jerry Kellenbenz (Alt.) AT ANSI X3.254, FC-FP; FC-LE; FC-ATM; IPI-3 Disk revision; IPI-3 Tape
47、revision and SCSI-FCP are FC-4 stan- dards. Copyright American National Standards Institute Provided by IHS under license with ANSI Licensee=IHS Employees/1111111001, User=OConnor, Maurice Not for Resale, 04/29/2007 13:14:25 MDTNo reproduction or networking permitted without license from IHS -,-,- x
48、 FC-PH-3 Fibre Channel Physical Document relationship FC-AL Arbitrated Loop FC-SW Switch Topology FC-FG Fabric Generic requirements and Signalling Interface FC-IG Fibre Channel Implementation Guide FC-LE Link FC-ATM Mapping of FC-SB Mapping to Single Byte FC-FP Mapping to HIPPI Command Code Sets Framing Protocol Encapsulation ATM/AAL5 IPI-3 Disk Revision to IPI-3 Tape Revision to IPI-3 Disk Std. IPI-3 Tape Std. SCSI-FCP SCSI-3 Fibre Channel Protocol Other FC