《BS-EN-858-1-2002.pdf》由会员分享，可在线阅读，更多相关《BS-EN-858-1-2002.pdf（58页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 858-1:2002 Incorporating Amendment No. 1 Separator systems for light liquids (e.g. oil and petrol) Part 1: Principles of product design, performance and testing, marking and quality control The European Standard EN 858-1:2002, with the incorporation of amendment A1:2004, has t
2、he status of a British Standard ICS 13.060.99 ? Licensed Copy: sheffieldun sheffieldun, na, Tue Nov 07 03:33:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 858-1:2002 This British Standard, having been prepared under the direction of the Building and Civil Engineering Sector Policy and Strategy
3、 Committee, was published under the authority of the Standards Policy and Strategy Committee on 26 February 2002 BSI 21 March 2005 ISBN 0 580 39180 9 National foreword This British Standard is the official English language version of EN 858-1:2002, including amendment A1:2004. EN 858-1:2002 is now a
4、 candidate “harmonized” European Standard and fully takes into account the requirements of the European Commission mandate M118, Wastewater engineering products, given under the EU Construction Products Directive (89/106/EEC), and is intended to lead to CE marking. The date of applicability of the a
5、mended EN 858-1:2002 as a harmonized European Standard, i.e. the date after which this standard may be used for CE marking purposes, is subject to an announcement in the Official Journal of the European Communities. The Commission in consultation with Member States have agreed a transition period fo
6、r the co-existence of harmonized European Standards and their corresponding national standard(s). It is intended that this period will comprise a period, usually nine months after the date of availability of the European Standard, during which any required changes to national regulations are to be m
7、ade, followed by a further twelve-month period for the implementation of CE marking. At the end of this co-existence period, the national standard(s) will be withdrawn. EN 858-1 is the subject of transitional arrangements agreed under the Commission mandate. In the UK there are no corrsponding natio
8、nal standards. There are no regulations in the UK dealing with reaction to fire of light liquid separators. Therefore the requirements of 6.2.8 and 8.4 are not applicable to separators intended for use in the UK. The UK participation in its preparation was entrusted to Technical Committee B/505, Was
9、tewater engineering, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI
10、Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for it
11、s correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interes
12、ts informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 55 and a back cover. The BSI copyright notice displayed in this document indicates when the
13、 document was last issued. Amendments issued since publication Amd. No. DateComments 1552521 March 2005see national foreword Licensed Copy: sheffieldun sheffieldun, na, Tue Nov 07 03:33:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD EN 858-1 NORME EUROPENNE January 2002 EUROPISCHE N
14、ORM + A1 November 2004 CEN European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: rue de Stassart 36, B - 1050 Brussels 2002 CEN - All rights of exploitation in any form and by any me
15、ans reserved worldwide for CEN national members. Ref. No. EN 858-1:2002 + A1:2004 E ICS 13.060.99 English version Separator systems for light liquids (e.g. oil and petrol) Part 1: Principles of product design, performance and testing, marking and quality control (includes amendment A1:2004) Installa
16、tions de sparation de liquids lgers (par exemple hydrocarbures) Partie 1: Principes pour la conception, les performances et les essays, le marquage et la matrise de la qualit (inclut lamendement A1:2004) Abscheideranlagen fr Leichtflssigkeiten (z.B I und Benzin) Teil 1: Bau-, Funktions- und Prfgrund
17、stze, Kennzeichnung und Gteberwachung (enthlt nderung A1:2004) This European Standard was approved by CEN on 8 March 2001; amendment A1 was approved by CEN on 14 October 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of th
18、is amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This amendment exists in three official versions (English, Frenc
19、h, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national electrotechnical committees of Austria, Belgium, Cypru
20、s, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Tue Nov
21、 07 03:33:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 858-1:2002 (E) 2 Contents page Foreword4 1 Scope 4 2 Normative references5 3 Terms and definitions .7 4 Classes of separators .8 5 Nominal sizes.8 6 Requirements.8 6.1 General8 6.2 Materials .8 6.2.1 General8 6.2.2 Concrete .9 6.2.3 Metallic
22、 materials.9 6.2.4 Plastic materials.9 6.2.5 Sealing materials .10 6.2.6 Coatings/linings.11 6.2.7 Chemical resistance11 6.2.8 Reaction to fire.12 6.3 Design requirements.12 6.3.1 Area of the separator or sludge trap12 6.3.2 Watertightness of components13 6.3.3 Accessibility.13 6.3.4 Water seals.13
23、6.3.5 Pipes and pipe joints.13 6.3.6 Internal components .13 6.3.7 Sludge traps.13 6.3.8 Access covers14 6.4 Structural stability .14 6.4.1 General14 6.4.2 Separator systems made of unreinforced concrete, fibre-reinforced concrete, reinforced concrete14 6.4.3 Separator systems made of glass fibre-re
24、inforced plastics .14 6.5 Functional requirements.14 6.5.1 General14 6.5.2 Storage capacity for light liquids.14 6.5.3 Automatic closure devices.14 6.5.4 Automatic warning devices and additional devices 15 6.5.5 Separators with a bypass device.15 6.5.6 Determination of the nominal size and class15 6
25、.6 Marking.16 6.6.1 Separator systems.16 6.6.2 Automatic closure devices, automatic warning devices.17 7 Manufacturers product information17 8 Test methods17 8.1 Materials .17 8.1.1 Concrete .17 8.1.2 Plastics materials.17 8.1.3 Coatings17 8.1.4 Chemical resistance of internal surfaces19 8.1.5 Chemi
26、cal resistance of external coatings.20 8.2 Watertighness of system components20 Licensed Copy: sheffieldun sheffieldun, na, Tue Nov 07 03:33:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 858-1:2002 (E) 3 8.3 Functional requirements.22 8.3.1 Storage capacity for light liquid.22 8.3.2 Automatic clo
27、sure device.22 8.3.3 Determination of the nominal size and class24 8.4 Reaction for fire .31 8.4.1 Products deemed to satisfy the requirements for reaction to fire Class A1.31 8.4.2 Products not deemed to satisfy reaction to fire Class A1.31 9 Type testing of factory made separator systems.31 9.1 Ge
28、neral31 9.2 Prototypes and documentation31 10 !Evaluation of conformity“34 10.1 General34 10.2 Factory production control.34 Annex A (normative) Analysis of effluent samples.35 A.1 General35 A.2 Infrared spectroscopy method.35 A.2.1 Extraction and preparation of the extract.35 A.2.2 Evaluation.36 A.
29、3 Gas chromatography method 37 A.3.1 General37 A.3.2 Reagents.37 A.3.3 Interferences 37 A.3.4 Procedure.37 A.3.5 Gas chromatographic analysis 37 A.3.6 Example GC conditions 38 A.3.7 Calibration38 A.3.8 Calculation of the oil concentration 39 Annex B (normative) Factory production control 40 Annex C
30、(informative) Established methods of calculation and testing.46 C.1 Germany .46 C.2 The Netherlands.46 C.3 France.46 C.4 Austria.47 Annex D (informative) Control by third party (third party control).48 D.1 General48 D.2 Procedure of the third party control48 D.2.1 Factories certified to EN ISO 9001.
31、48 D.2.2 Factories not certified to EN ISO 9001 48 D.3 Report by the third party.49 D.4 Non-conforming products 49 Annex E (informative) Relevant extracts from EC Decision 96/603/EC, as amended50 Annex ZA (informative) Clauses of this European Standard addressing the provisions of EU Constructions P
32、roducts Directve 51 Bibliography55 Licensed Copy: sheffieldun sheffieldun, na, Tue Nov 07 03:33:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 858-1:2002 (E) 4 Foreword This European Standard has been prepared by Technical Committee CEN /TC 165, “Wastewater engineering“, the secretariat of which i
33、s held by DIN. !This document has been prepared under Mandate M/118 “Wastewater engineering products“ given to CEN/CENELEC by the European Commission and the European Free Trade Association to allow CE marking under the Construction Products Directive (89/106/EEC). For relationship with this Directi
34、ve, see informative Annex ZA, which is an integral part of this standard.“ This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2002, and conflicting national standards shall be withdrawn at the l
35、atest by December 2002. This is the first part of the two part standard for separator systems for light liquids. Part 2 of this standard contains the necessary statements on selection of nominal size, installation, operation and maintenance of separator systems for light liquids. Annexes A and B are
36、 normative. The annexes C, D and E are informative. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard : Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary,
37、 Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and the United Kingdom. Foreword to amendment A1 This document (EN 858-1:2002/A2:2004) has been prepared by Technical Committee CEN /TC 165, “Wastewater engineering“, the secretariat of w
38、hich is held by DIN. This Amendment to the European Standard EN 858-1:2002 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2005, and conflicting national standards shall be withdrawn at the latest by August 2006. Th
39、is document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s) . For relationship with EU Directive(s), see informative Annex ZA, which is integral part of this document. According
40、to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, L
41、uxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. 1 Scope This standard specifies definitions, nominal sizes, principles of design, performance requirements, marking, testing and quality control for separator systems for l
42、ight liquids. This standard applies to separator systems for light liquids, where light liquids are separated from waste water by means of gravity and/or coalescence. Licensed Copy: sheffieldun sheffieldun, na, Tue Nov 07 03:33:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 858-1:2002 (E) 5 This s
43、tandard does not apply to the treatment of stable emulsions, solutions of light liquids and water, grease and oils of vegetable and animal origin. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references
44、are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest
45、 edition of the publication referred to applies (including amendments). ISO 48, Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD). ISO 178, Plastics Determination of flexural properties. ISO 180, Plastics Determination of Izod impact strength. ISO
46、185, Grey cast iron Classification. ISO 527-2, Plastics Determination of tensile properties Part 2: Test conditions for moulding and extrusion plastics. ISO 630, Structural steels Plates, wide flats, bars, sections and profiles. !ISO 877; Plastics Methods of exposure to direct weathering, to weather
47、ing using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors.“ ISO 1083, Spheroidal graphite cast iron Classification. ISO 1133, Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics. ISO 1183, Plastics Met
48、hods for determining the density and relative density of non-cellular plastics. ISO 1518, Paints and varnishes Scratch test. ISO 1817, Rubber, vulcanized Determination of the effect of liquids. ISO 1920, Concrete tests Dimensions, tolerances and applicability of test specimens. ISO 2409, Paints and
49、varnishes Cross-cut test. ISO 2736-1, Concrete tests Test specimens Part 1: Sampling of fresh concrete. ISO 2736-2, Concrete tests Test specimens Part 2: Making and curing of test specimens for strength tests. ISO 2808, Paints and varnishes Determination of film thickness. ISO 2812-1, Paints and varnishes Determination of resistance to liquids Part 1: General methods. ISO 2812-2, Paints and varnishes, determination of re