《BS-EN-60335-2-9-2003.pdf》由会员分享，可在线阅读，更多相关《BS-EN-60335-2-9-2003.pdf（38页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60335-2-9:2003 +A2:2006 Incorporating CENELEC amendment A12 Household and similar electrical appliances Safety Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances ICS 13.120; 97.040.50 ? BS EN 60335-2-9:2003+A2:2006 This British Stand
2、ard was published under the authority of the Standards Policy and Strategy Committee on 9 September 2003 BSI 2008 ISBN 978 0 580 61095 0 National foreword This British Standard is the UK implementation of EN 60335-2-9:2003 +A2:2006, incorporating A12:2007. It is derived from IEC 60335-2-9:2002, inco
3、rporating amendments 1:2004 and 2:2006. It supersedes BS EN 60335-2-9 which is withdrawn. The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to IEC text carry the number of the IEC amendment. For example, text altered by IEC amen
4、dment 1 is indicated by !“. The CENELEC common modifications have been implemented at the appropriate places in the text. The start and finish of each common modification is indicated in the text by tags . The start and finish of text introduced or altered by CENELEC amendment is indicated in the te
5、xt by tags. For example, the common modifications introduced by CENELEC amendment A12 are indicated by . The UK participation in its preparation was entrusted by Technical Committee CPL/61, Safety of household electrical appliances, to Subcommittee CPL/61/07, Heated appliances group. A list of organ
6、izations represented on this subcommittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obli
7、gations. Amendments/corrigenda issued since publication Amd. No. DateComments 152038 July 2004See national foreword 1652329 September 2006See national foreword A1231 January 2008Implementation of CENELEC amendment A12:2007 EUROPEAN STANDARD EN 60335-2-9:2003+A2 NORME EUROPENNE + A12 November 2007 EU
8、ROPISCHE NORM CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2003 CENELEC - All rights of exploitation in any form and by any m
9、eans reserved worldwide for CENELEC members. Ref. No. EN 60335-2-9:2003 ICS 13.120; 97.040.50 Supersedes EN 60335-2-9:1995 + A1:1998 + A2:2000 + A11:2000 + A12:2002 + A13:2002 English version Household and similar electrical appliances Safety Part 2-9: Particular requirements for grills, toasters an
10、d similar portable cooking appliances (IEC 60335-2-9:2002, modified) Appareils lectrodomestiques et analogues Scurit Partie 2-9: Rgles particulires pour les grils, grille-pain et appareils de cuisson mobiles analogues (CEI 60335-2-9:2002, modifie) Sicherheit elektrischer Gerte fr den Hausgebrauch un
11、d hnliche Zwecke Teil 2-9: Besondere Anforderungen fr Grillgerte, Brotrster und hnliche ortsvernderliche Kochgerte (IEC 60335-2-9:2002, modifiziert) This European Standard was approved by CENELEC on 2003-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipu
12、late the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standar
13、d exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national
14、 electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingd
15、om. Page 2 BS EN 60335-2-9:2003+A2:2006 Foreword The text of document 61/2100/FDIS, future fifth edition of IEC 60335-2-9, prepared by the IEC Technical Committee 61, was submitted to the IEC-CENELEC parallel vote. A proposal for an amendment, document CLC/TC 61(SEC)1371, was discussed during the Ki
16、sta meeting of CENELEC TC 61 in May 2002, when it was decided to submit a draft amendment prA11 to the formal vote. As a result of the Kista meeting, a draft amendment prAA containing the relevant existing common modifications was also submitted to the formal vote. The texts of the FDIS, prA11 and p
17、rAA were approved by CENELEC as a new edition of EN 60335-2-9 on 2003-03-01. This European Standard replaces EN 60335-2-9:1995 + A1:1998 + A2:2000 + A11:2000 + A12:2002 + A13:2002. The following dates are applicable: - latest date by which the EN has to be implemented at national level by publicatio
18、n of an identical national standard or by endorsement (dop) 2004-03-01 - date on which national standards conflicting with the EN have to be withdrawn (dow) 2006-03-01 This part 2 has to be used in conjunction with EN 60335-1, Household and similar electrical appliances Safety Part 1: General requir
19、ements. It was established on the basis of the 2002 edition of that standard. Amendments and revisions of Part 1 have also to be taken into account and the dates when such changes become applicable will be stated in the relevant amendment or revision of Part 1. This part 2 supplements or modifies th
20、e corresponding clauses of EN 60335-1, so as to convert it into the European Standard: Safety requirements for electric grills, toasters and similar portable cooking appliances. When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as far as is reasonable. Whe
21、n this standard states “addition“, “modification“ or “replacement“, the relevant text of Part 1 is to be adapted accordingly. NOTE 1 The following numbering system is used: - subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1; - unless notes are in a
22、 new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a replaced clause or subclause; - additional annexes are lettered AA, BB, etc.; - subclauses, notes and annexes that are additional to those in the IEC standard are prefixed with the letter Z. NOTE 2 T
23、he following print types are used: - requirements: in roman type; - test specifications: in italic type; - notes: in small roman type. Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun are also in bold. There are no spec
24、ial national conditions causing a deviation from this European Standard, other than those listed in Annex ZA to EN 60335-1. There are no national deviations from this European Standard, other than those listed in Annex ZB to EN 60335-1. _ -,-,- Page 3 Introduction An investigation by CENELEC TC 61 h
25、as shown that all risks from products within the scope of this standard are fully covered by the Low Voltage Directive, 73/23/EEC. For products having mechanical moving parts, a risk assessment in accordance with the Machinery Directive, 98/37/EC, has shown that the risks are mainly of electrical or
26、igin and consequently this directive is not applicable. However, the relevant essential safety requirements of the Machinery Directive are covered by this standard together with the principal objectives of the Low Voltage Directive. _ Endorsement notice The text of the International Standard IEC 603
27、35-2-9:2002 was approved by CENELEC as a European Standard with agreed common modifications . Foreword to amendment A1 The text of document 61/2535/FDIS, future amendment 1 to IEC 60335-2-9:2002, prepared by the IEC Technical Committee 61, Safety of household and similar electrical appliances, was s
28、ubmitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 60335-2-9:2003 on 2004-03-01. The following dates are applicable: - latest date by which the amendment has to be implemented at national level by publication of an identical national standard or by endorsemen
29、t (dop) 2004-12-01 - date on which national standards conflicting with the amendment have to be withdrawn (dow) 2007-03-01 This amendment supplements or modifies the corresponding clauses of EN 60335-2-9:2003. There are no special national conditions causing a deviation from this amendment. There ar
30、e no national deviations from this amendment. NOTE In this document, p is used in the margin to indicate instructions for preparing the printed version. _ Endorsement notice The text of amendment 1:2004 to the International Standard IEC 60335-2-9:2002 was approved by CENELEC as an amendment to the E
31、uropean Standard without any modification. BS EN 60335-2-9:2003+A2:2006 -,-,- Page 4 BS EN 60335-2-9:2003+A2:2006 Foreword to amendment A2 The text of document 61/2946/FDIS, future amendment 2 to IEC 60335-2-9:2002, prepared by IEC Technical Committee 61, Safety of household and similar electrical a
32、ppliances, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A2 to EN 60335-2-9:2003 on 2006-04-01. The following dates are applicable: - latest date by which the amendment has to be implemented at national level by publication of an identical national standard
33、or by endorsement (dop) 2007-01-01 - date on which national standards conflicting with the amendment have to be withdrawn (dow) 2009-04-01 This amendment supplements or modifies the corresponding clauses of EN 60335-2-9:2003. As a consequence of endorsing amendment 2:2006 to IEC 60335-2-9:2002, the
34、common modifications in EN 60335-2-9:2003 are replaced by IEC text and therefore withdrawn, with the exception of the addition of 19.11.2 which remains valid. There are no special national conditions causing a deviation from this amendment. There are no national deviations from this amendment. _ End
35、orsement notice The text of amendment 2:2006 to the International Standard IEC 60335-2-9:2002 was approved by CENELEC as an amendment to the European Standard without any modification. _ Foreword to amendment A12 A proposal to amend EN 60335-2-9:2003, document CLC/TC 61(SEC)1553, was discussed durin
36、g the Malaga meeting of CENELEC TC 61 in June 2006, when it was decided to submit a draft for an amendment to the Unique Acceptance Procedure. The draft was circulated in February 2007 and was approved by CENELEC as amendment A12 to EN 60335-2-9:2003 on 2007-10-01. The following dates are applicable
37、: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2008-10-01 date on which national standards conflicting with the amendment have to be withdrawn (dow) 2010-10-01 _ -,-,- Page 5 CONTENTS INTRODUCTION.6 1 Sco
38、pe 7 2 Normative references .8 3 Definitions8 4 General requirement.11 5 General conditions for the tests 11 6 Classification12 7 Marking and instructions.12 8 Protection against access to live parts 14 9 Starting of motor-operated appliances.14 10 Power input and current14 11 Heating 15 12 Void .18
39、 13 Leakage current and electric strength at operating temperature.18 14 Transient overvoltages .18 15 Moisture resistance 18 16 Leakage current and electric strength .19 17 Overload protection of transformers and associated circuits 20 18 Endurance20 19 Abnormal operation 20 20 Stability and mechan
40、ical hazards22 21 Mechanical strength .22 22 Construction.23 23 Internal wiring.25 24 Components.25 25 Supply connection and external flexible cords .26 26 Terminals for external conductors .26 27 Provision for earthing26 28 Screws and connections .26 29 Clearances, creepage distances and solid insu
41、lation .27 30 Resistance to heat and fire .27 31 Resistance to rusting27 32 Radiation, toxicity and similar hazards 28 Annexes .34 Bibliography .35 Figure 101 Examples of appliances 29 Figure 102 Load for testing rotating spits30 Figure 103 Vessel for testing hotplates.31 Figure 104 Vessel for testi
42、ng induction hotplates 31 Table 101 Quantity of liquid in the vessel .9 Figure Z101 Probe for measuring flat surface temperatures 32 Figure Z102 Projection of the accessible part of a handle 32 Figure Z103 Front view of appliance with identification of excluded areas33 Table Z101 Temperature rise li
43、mits for surfaces .17 BS EN 60335-2-9:2003+A2:2006 Page 6 BS EN 60335-2-9:2003+A2:2006 INTRODUCTION It has been assumed in the drafting of this International Standard that the execution of its provisions is entrusted to appropriately qualified and experienced persons. This standard recognizes the in
44、ternationally accepted level of protection against hazards such as electrical, mechanical, thermal, fire and radiation of appliances when operated as in normal use taking into account the manufacturers instructions. !It also covers abnormal situations that can be expected in practice and takes into
45、account the way in which electromagnetic phenomena can affect the safe operation of appliances.“ This standard takes into account the requirements of IEC 60364 as far as possible so that there is compatibility with the wiring rules when the appliance is connected to the supply mains. However, nation
46、al wiring rules may differ. If an appliance within the scope of this standard also incorporates functions that are covered by another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, as far as is reasonable. If applicable, the influence of one function on the other is
47、 taken into account. This standard is a product family standard dealing with the safety of appliances and takes precedence over horizontal and generic standards covering the same subject. An appliance that complies with the text of this standard will not necessarily be considered to comply with the
48、safety principles of the standard if, when examined and tested, it is found to have other features which impair the level of safety covered by these requirements. An appliance employing materials or having forms of construction differing from those detailed in the requirements of this standard may be examined and tested according to the intent of the requirements and, if found to be substantially equivalent, may be considered to comply with the standard. Page 7 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY Part 2-9: Partic