BS-EN-60730-2-9-1995.pdf

上传人:小小飞 文档编号:3745067 上传时间:2019-09-22 格式:PDF 页数:38 大小:362.52KB
返回 下载 相关 举报
BS-EN-60730-2-9-1995.pdf_第1页
第1页 / 共38页
BS-EN-60730-2-9-1995.pdf_第2页
第2页 / 共38页
BS-EN-60730-2-9-1995.pdf_第3页
第3页 / 共38页
BS-EN-60730-2-9-1995.pdf_第4页
第4页 / 共38页
BS-EN-60730-2-9-1995.pdf_第5页
第5页 / 共38页
亲,该文档总共38页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

《BS-EN-60730-2-9-1995.pdf》由会员分享,可在线阅读,更多相关《BS-EN-60730-2-9-1995.pdf(38页珍藏版)》请在三一文库上搜索。

1、BRITISH STANDARD BS EN 60730-2-9:1995 Incorporating Amendments Nos. 1, 2, 3, 4 and 5 Specification for Automatic electrical controls for household and similar use Part 2-9: Particular requirements for temperature sensing controls The European Standard EN 60730-2-9:1995 has the status of a British St

2、andard ICS 97.120 ? Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 18:08:39 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60730-2-9:1995 This British Standard, having been prepared under the direction of the Electrotechnical Sector Board, was published under the authority of the Standards

3、 Board and comes into effect on 15 October 1995 BSI 6 May 2005 The following BSI references relate to the work on this standard: Committee reference CPL/72 Draft for comment 84/27778 DC ISBN 0 580 24524 1 Committees responsible for this British Standard The preparation of this British Standard was e

4、ntrusted to Technical Committee CPL/72, Electrical control devices for household equipment and appliances, upon which the following bodies were represented: Association of Control Manufacturers (BEAMA Ltd.) Association of Manufacturers of Domestic Electrical Appliances British Combustion Equipment M

5、anufacturers Association British Electrotechnical Approvals Board British Gas plc British Refrigeration Association Consumer Policy Committee of BSI Department of the Environment (Building Research Establishment) Department of Trade and Industry (Consumer Safety Unit, CA Division) Electricity Associ

6、ation ERA Technology Ltd. Membrane Switch Manufacturers Association Society of British Gas Industries Amendments issued since publication Amd. No.DateComments 9408March 1997 9556September 1997 9812February 1998See national foreword 1323221 January 2002 See national foreword 155886 May 2005See nation

7、al foreword Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 18:08:39 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60730-2-9:1995 BSI 6 May 2005 i Contents Page Committees responsibleInside front cover National forewordii Foreword2 Text of EN 60730-2-97 National annex NA (informative) Orig

8、inal IEC text deleted or amended by CENELEC common modifications to IEC 730-2-9:199227 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 18:08:39 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60730-2-9:1995 ii BSI 6 May 2005 National foreword This British Standard has been prepared by Techni

9、cal Committee CPL/72 and is the English language version of EN 60730:1995 Automatic electric controls for household and similar use Part 2-9: Particular requirements for temperature sensing controls including its amendments A1:1996, A11:1997, A2:1997, corrigendum 1997, amendment A12:2001, corrigendu

10、m March 2001 and amendment A13:2004, published by the European Committee for Electrotechnical Standardization (CENELEC). It was derived from IEC 60730-2-9:1990, first edition, including amendments 1 and 2, published by the International Electrotechnical Commission (IEC). Corrigendum March 2001 repla

11、ces the latest date of withdrawal of conflicting national standards in the EN foreword and the forewords to amendments A1, A11 and A2. The CENELEC common modifications have been implemented at the appropriate places in the text. The start and finish of each common modification is indicated in the te

12、xt by tags . Where a common modification has been introduced by amendment, the tags carry the number of the amendment. For example, the common modifications introduced by CENELEC amendment A13 are indicated by . Parts of the original IEC text that have been modified by CENELEC have been quoted in Na

13、tional annex NA. Annexes designated “normative” are part of the body of the standard. Annexes designated “informative” are given for information only. National annexes are designated “informative”. The foreword of EN 60730-2-9 makes reference to the “date of withdrawal”, dow, of the relevant nationa

14、l standard. In this case the relevant national standard is BS 3955 which will cease to be applicable to temperature sensing controls within the scope of BS EN 60730-2-9 on 1 January 2004. Certification and marks will not be awarded after this date with respect to BS 3955. BS 3955 will be progressive

15、ly amended to delete specific controls at the dates of withdrawal agreed. The foreword of amendment A1 to the EN makes reference to the “date of withdrawal (dow) of conflicting national standards” as 2004-01-01 In this case, the relevant national standard is BS EN 60730-2-9:1995, but the date of wit

16、hdrawal relates only to those parts of the British Standard subject to Amendment No. 1. Certificates and marks will not be awarded after this date with respect to the British Standard not incorporating Amendment No. 1. They will be awarded only to the amended British Standard. This British Standard

17、is to be read in conjunction with BS EN 60730-1:1995 General requirements. The many references to Part 1 should be read as references to BS EN 60730-1, which is the English language version of EN 60730-1:1995 which was derived from IEC Publication 60730-1 (1993) second edition. Cross-references The

18、British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A Br

19、itish Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a fr

20、ont cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 32, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 18:08:39 GMT+00:00 2006,

21、Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60730-2-9 February 1995 + A1 August 1996 + A11 January 1997 + A2 April 1997 + A12 March 2001 + A13 December 2004 ICS 97.120Incorporates corrigenda July 1997 and March 2001 Descriptors: Electrical household appliance, con

22、trol, automatic control, definition, requirement, test, temperature sensing device, thermostat English version Automatic electrical controls for household and similar use Part 2-9: Particular requirements for temperature sensing controls (includes amendments A1:1996 + A11:1997 + A2:1997 + A12:2001 +

23、 A13:2004) (IEC 60730-2-9:1992 + A1:1996 + A2:1994, modified) Dispositifs de commande lectrique automatiques usage domestique et analogue Partie 2-9: Rgles particulires pour les dispositifs de commande thermosensibles (inclut les amendements A1:1996 + A11:1997 + A2:1997 + A12:2001 + A13:2004) (CEI 6

24、0703-2-9:1992 + A1:1996 + A2:1994, modifie) Automatische elektrische Regel- und Steuergerte fr den Hausgebrauch und hnliche Anwendungen Teil 2-9: Besondere Anforderungen an Temperaturabhngige Regel- und Steuergerte (enthlt nderungen A1:1996 + A11:1997 + A2:1997 + A12:2001 + A13:2004) (IEC 60730-2-9:

25、1992 + A1:1996 + A2:1994, modifiziert) This European Standard was approved by CENELEC on 1994-10-04. Amendment A13 was approved by CENELEC on 2004-09-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the

26、 status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, Ger

27、man). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus,

28、 Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Stand

29、ardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1995 Copyright reserved to CENELEC members Ref. No. EN 60730-2-9:1995 + A1:1996 + A11:1997 + A2:1997 + A12:2001 + A13:2004 E Licensed C

30、opy: sheffieldun sheffieldun, na, Mon Nov 13 18:08:39 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60730-2-9:1995 BSI 6 May 2005 2 Foreword This European Standard has been prepared by the CENELEC Technical Committee TC 72, Automatic controls for household use. It consists of the text of IEC 730-2-9

31、:1992 and a number of common modifications which were submitted to the formal vote and approved by CENELEC as EN 60730-2-9 on 1994-10-04. The following dates were fixed: This part 2 has to be used in conjunction with EN 60730-1:1991, Automatic electrical controls for household and similar use Part 1

32、: General requirements, and its amendments A1:1991, A11:1991 and A12:1993. Consideration may be given to future editions of, or amendments to, EN 60730-1. Where a particular sub-clause of part 1 is not mentioned in this part 2, that subclause applies as far as is reasonable. Where this standard stat

33、es addition, modification or replacement, the relevant text of part 1 is to be adapted accordingly. Subclauses which are in addition to those in IEC 730-1 are numbered 101, 102 etc. Subclauses which are in addition to those in IEC 730-2-9 are numbered 601, 602, etc. Additional appendices are labelle

34、d AA, BB etc. CENELEC annexes are numbered ZA, ZB, etc. There are no special national conditions (snc) causing a deviation from this European Standard other than those listed in Annex ZA of EN 60730-1. Where reference is made to other international or harmonized standards, the edition of that standa

35、rd quoted in Annex ZB (normative) is applicable. NOTEIn this document the following print types are used: requirements proper: in roman type; test specifications: in italic type; explanatory matter: in smaller roman type; instructions for modification of the reference document: in bold type. Forewor

36、d to amendment A1 This amendment to the European Standard has been prepared by the Technical Committee CENELEC TC 72, Automatic controls for household use. It consists of the text of amendment 1:1994 to the International Standard IEC 730-2-9:1992 and common modifications prepared by CENELEC TC 72. T

37、he text of the draft was submitted to the formal vote and was approved by CENELEC as amendment A1 to EN 60730-2-9:1995 on 1996-03-05. The following dates were fixed: This document supplements or modifies the corresponding clauses of amendment 1:1994 to IEC 730-2-9:1992 so as to convert it into amend

38、ment A1 to EN 60730-2-9:1995. This document was established on the basis of EN 60730-1:1995. Consideration may be given to future editions of, or amendments to, EN 60730-1. Where reference is made to other international or harmonized standards, the edition of that standard quoted in Annex ZA (normat

39、ive) is applicable. Special national conditions to this amendment are listed in Annex ZB (normative) and are in addition to those in Annex ZB to EN 60730-1. NOTEIn this document, the following print types are used: requirements: in roman type; test specifications: in italic type; notes: in small rom

40、an type; instructions for modification of the reference document: in bold type. latest date of publication of an identical national standard(dop) 1996-01-01 latest date of withdrawal of conflicting national standards(dow) 2004-01-01 latest date by which the amendment has to be implemented at nationa

41、l level by publication of an identical national standard or by endorsement(dop) 1997-03-01 latest date by which the national standards conflicting with the amendment have to be withdrawn(dow) 2004-01-01 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 18:08:39 GMT+00:00 2006, Uncontrolled Copy

42、, (c) BSI EN 60730-2-9:1995 BSI 6 May 2005 3 Foreword to amendment A11 This amendment was prepared by the CENELEC Technical Committee TC 72, Automatic controls for household use. It adds requirements for a voltage maintained thermal cut-out. The text of the draft was submitted to the Unique Acceptan

43、ce Procedure and was approved by CENELEC as amendment A11 to EN 60730-2-9:1995 on 1996-12-09. The following dates were fixed: Foreword to amendment A2 The text of amendment 2:1994 to the International Standard IEC 730-2-9:1992, prepared by IEC TC 72, Automatic controls for household use, together wi

44、th the common modifications prepared by the Technical Committee CENELEC TC 72, was submitted to the formal vote and was approved by CENELEC as amendment A2 to EN 60730-2-9:1995 on 1997-03-11. The following dates were fixed: This document supplements or modifies the corresponding clauses of EN 60730-

45、2-9:1995. Foreword to amendment A12 The amendment to EN 60730-2-9:1995 has been prepared by the Technical Committee CENELEC TC 72, Automatic controls for household use. The text was agreed for submission to the CENELEC Unique Acceptance Procedure (UAP) at the meeting of CLC/TC 72 in Luzem, Switzerla

46、nd, on 1999-09-09/10. The draft was circulated as prAA (amending Table 7.2 to include a declaration for a click rate of temperature sensing controls) and prAB (amending Table 7.2 and subclause 14.4.3.1 concerning the test conditions of voltage maintained thermal cut-outs) in December 1999 and was ap

47、proved by CENELEC as amendment A12 to EN 60730-2-9:1995 on 2000-08-01. The following dates were fixed: Foreword to amendment A13 This amendment to the European Standard has been prepared by the CENELEC Technical Committee TC 72: Automatic controls for household use. The text of the draft was submitt

48、ed to the Unique Acceptance Procedure and was approved by CENELEC as amendment A13 to EN 60730-2-9:1995 on 2004-09-01. latest date by which the amendment has to be implemented at national level by publication of an identical national standard or by publication(dop) 1997-07-01 latest date by which th

49、e national standards conflicting with the amendment have to be withdrawn(dow) 2004-01-01 latest date by which the amendment has to be implemented at national level by publication of an identical national standard or by endorsement(dop) 1997-10-01 latest date by which the national standards conflicting with the amendment have to be withdrawn(dow) 2004-01-01 latest date by which the amendment has to be implemented at national level by publication of a

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 其他


经营许可证编号:宁ICP备18001539号-1