《BS-EN-ISO-10087-2006.pdf》由会员分享，可在线阅读，更多相关《BS-EN-ISO-10087-2006.pdf（14页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 10087:2006 Small craft ? Craft identification Coding system The European Standard EN ISO 10087:2006 has the status of a British Standard ICS 47.080 ? Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:12:21 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 10087:
2、2006 This British Standard was published under the authority of the Standards Policy and Strategy Committee ? on 31 March 2006 BSI 2006 ISBN 0 580 47030 X National foreword This British Standard is the official English language version of? EN ISO 10087:2006. It is identical with ISO 10087:2006. It s
3、upersedes ? BS EN ISO 10087:1996 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee GME/33, Small craft, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on t
4、he interpretation, or proposals for change, and keep ? UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standar
5、ds which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This p
6、ublication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front
7、cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages ii to iv, pages 1 to 5 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffie
8、ldun sheffieldun, na, Sun Nov 19 13:12:21 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10087 March 2006 ICS 47.080Supersedes EN ISO 10087:1996 English Version Small craft - Craft identification - Coding system (ISO 10087:2006) Petits navires - I
9、dentification du bateau - Systme de codage (ISO 10087:2006) Kleine Wasserfahrzeuge - Schiffskrper-Kennzeichnung - Codierungssystem (ISO 10087:2006) This European Standard was approved by CEN on 14 March 2006. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate t
10、he conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists i
11、n three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies
12、of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITT
13、EE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2006 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10087:2006: E Licensed Copy: sheffi
14、eldun sheffieldun, na, Sun Nov 19 13:12:21 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Foreword This document (EN ISO 10087:2006) has been prepared by Technical Committee ISO/TC 188 “Small craft“ in collaboration with Technical Committee CEN/SS T01 “Shipbuilding and maritime structures“, the secretar
15、iat of which is held by CMC. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2006, and conflicting national standards shall be withdrawn at the latest by September 2006. This document su
16、persedes EN ISO 10087:1996. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral p
17、art of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Irel
18、and, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Endorsement notice The text of ISO 10087:2006 has been approved by CEN as EN ISO 10087:2006 without any modifications. EN ISO 10087:200
19、6 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:12:21 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Reference number ISO 10087:2006(E) INTERNATIONAL STANDARD ISO 10087 Third edition 2006-03-15 Small craft Craft identification Coding system Petits navires Identification du bateau Systme de c
20、odage EN ISO 10087:2006 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:12:21 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:12:21 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 10087:2006 iii Contents Page Foreword iv 1Scope . 1
21、2Normative references . 1 3Terms and definitions. 1 4Composition of craft identification number (CIN) . 2 5Requirements 3 5.1Size . 3 5.2Permanency of marking . 3 5.3Location . 3 5.4Duplicate CIN. 4 5.5Time of CIN marking . 4 5.6Display format . 4 6Additional information 4 Annex ZA (informative) Rel
22、ationship between this Standard and the Essential Requirements of EU Directive 94/25 EC as amended by Directive 2003/44/EC 5 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:12:21 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 10087:2006 iv Foreword ISO (the International Organization fo
23、r Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the
24、 right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Internati
25、onal Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication
26、as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
27、ISO 10087 was prepared by Technical Committee ISO/TC 188, Small craft. This third edition cancels and replaces the second edition (ISO 10087:1995), which has been technically revised. Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:12:21 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 1 Small c
28、raft Craft identification Coding system 1 Scope This International Standard establishes a coding system to achieve identification of any small craft in terms of ? identification code of the country of the manufacturer; ? identification code of the manufacturer; ? serial number; ? month and year of m
29、anufacture; ? model year. It applies to small craft of all types and materials, of hull length up to 24 m. It does not apply to beach or bathing toys. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edit
30、ion cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 3166-1, Codes for the representation of names of countries and their subdivisions Part 1: Country codes 3 Terms and definitions For the purposes of this document, the foll
31、owing terms and definitions apply. 3.1 craft identification number CIN unique series of numerals, letters and a hyphen, permanently affixed to a craft hull 3.2 manufacturer any natural or legal person who takes responsibility for placing a product covered under this International Standard on the mar
32、ket EN ISO 10087:2006 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:12:21 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 2 4 Composition of craft identification number (CIN) A CIN shall consist of 14 consecutive characters plus a hyphen as specified in 4.1 to 4.4 without intervening spaces,
33、solidi (slashes) or dashes. 4.1 The first two characters, followed by a hyphen, designate the code of the country of the manufacturer as specified in the ISO alpha-2 code in ISO 3166-1. 4.2 The next three characters are the unique identification code, assigned by a national authority or recognized o
34、rganization. This code may be ? a unique code of the manufacturer, or ? a code of a national authority or recognized organization. These characters may consist of numerals and/or letters, except for the numerals 0 and 1. 4.3 The following five characters indicate the unique serial number of each cra
35、ft as assigned by ? the manufacturer, or ? a national authority or recognized organization. The serial number may consist of numerals and/or letters, except for the letters I, O and Q. 4.4 The last four characters designate the month and year of manufacture, and the model year. The month of manufact
36、ure shall be coded according to Table 1. Table 1 Codes representing month of manufacture Month Code Month Code January A July G February B August H March C September I April D October J May E November K June F December L The year of manufacture shall be identified by the last numeral of the producti
37、on year. The model year is a twelve-month period during which the craft is intended to be placed for the first time on the market and shall be identified by the last two numerals of the year in question. If this twelve-month period extends across two calendar years, the manufacturer decides which of
38、 these is the model year. EN ISO 10087:2006 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:12:21 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 3 4.5 CIN example: NL-HXAB7A33G506 where 5 Requirements 5.1 Size The characters shall be at least 6 mm high. 5.2 Permanency of marking Each CIN shall
39、 be carved, burned, stamped, embossed, moulded, or otherwise permanently affixed, so that alteration, removal, or replacement will be obvious. If on a plate, the plate shall be fastened excluding screwing or riveting as sole means of fastening so that its removal will cause scarring to the surroundi
40、ng area. 5.3 Location The CIN shall be visible on the starboard outboard side of the transom, or near the stern within 50 mm of the transom top, gunwale, hull/deck joint or its capping, whichever is lowest. 5.3.1 On craft with a transom, the CIN shall be located on the starboard side of the transom.
41、 5.3.2 On craft without a transom or with a transom on which it is impractical to locate the CIN, the CIN shall be affixed within 300 mm of the stern. 5.3.3 On catamarans the CIN shall be located as follows. ? Hulls structurally permanently connected: on the starboard hull. ? Hulls detachable but re
42、garded as the primary structure: on both hulls. ? Hulls readily removable and/or replaceable: on the aft cross-beam within 300 mm of the starboard hull; this also applies to catamaran-type pontoon boats. 5.3.4 On trimarans the CIN shall be located on the centre hull in accordance with 5.3.1 or 5.3.2
43、. EN ISO 10087:2006 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:12:21 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 4 5.3.5 On inflatable boats the CIN shall be affixed on the rigid aft cross-beam or motor bracket within 300 mm of the starboard hull attachment. If the CIN is not readily v
44、isible due to the construction of the boat, it may be applied additionally to some other suitable structure of the boat, such as the console assembly. 5.3.6 Rails, fittings or other accessories shall not obscure the CIN located as specified above. If the design of the small craft would result in thi
45、s, the CIN shall be located as near as possible to the required location to be visible. 5.4 Duplicate CIN A duplicate CIN shall be affixed to a non-removable part of the craft in a hidden location only known by the manufacturer. The duplicate CIN shall be located in the interior or beneath a fitting
46、 or item of hardware. Catamarans shall have this hidden CIN in or on both hulls. The CIN should be located so that it is extremely difficult to reach and modify. 5.5 Time of CIN marking The CIN shall be affixed to the craft during the construction or assembly of the craft. In no case shall the craft
47、 be put on the market without the CIN being affixed. 5.6 Display format The CIN shall be displayed in alphanumerical characters (arabic numerals and upper-case letters) and shall read from left to right. 6 Additional information If additional information is displayed on the craft within 50 mm of the
48、 CIN, it shall be separated from the CIN by means of borders or it shall be on a separate label so that it will not be interpreted as part of the CIN. EN ISO 10087:2006 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 13:12:21 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ANNEX ZA (informative) R
49、elationship between this Standard and the Essential Requirements of EU Directive 94/25 EC as amended by Directive 2003/44/EC This Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide one means of conforming to Essential Requirements of the New Approach Directive 94/25/EC as amended by Directive 2003/44/EC. Once this standard is cited in the Official Journal of the European Communities under that Directi