《BS-EN-ISO-IEC-7811-1-1996.pdf》由会员分享，可在线阅读，更多相关《BS-EN-ISO-IEC-7811-1-1996.pdf（36页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO/IEC 7811-1:1996 Implementation of EN ISO/IEC 7811-1:1996 Identification cards Recording technique Part 1: Embossing The European Standard EN ISO/IEC 7811-1:1996 has the status of a British Standard ICS 35.240.15 Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 15 05:31:
2、26 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO/IEC 7811-1:1996 This British Standard, having been prepared under the direction of the DISC Board, was published under the authority of the Standards Board and comes into effect on 15 December 1996 BSI 10-1998 The following BSI references relat
3、e to the work on this standard: Committee reference IST/17 Draft for comment 95/646853 DC ISBN 0 580 26860 8 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee IST/17, Identification cards and related devices, upon which the
4、 following bodies were represented: APACS (Barclaycard) APACS (Co-operative Bank) APACS (Lloyds Bank) APACS (Midland Bank) APACS (Nat West Bank) Association for Payment Clearing Services (APACS) BT Laboratories Cellnet Consumer Policy Committee of BSI Electricity Association GPT Card Technology HMSO
5、 Mondex International Motorola Ltd. Rochford Thompson Equipment Shell UK Thorn Transit Systems International Vodafone Ltd. Westinghouse Cubic Ltd. Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 15 05:31:26 GMT+00:00 2006, Uncontrolled Cop
6、y, (c) BSI BS EN ISO/IEC 7811-1:1996 BSI 10-1998i Contents Page Committees responsibleInside front cover National forewordii Foreword2 Text of EN ISO/IEC1 Annex ZA (normative) Normative references to international publications with their relevant European publicationsInside back cover Licensed Copy:
7、 sheffieldun sheffieldun, na, Wed Nov 15 05:31:26 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO/IEC 7811-1:1996 ii BSI 10-1998 National foreword This Part of BS EN ISO/IEC 7811-1 is the English language version of EN ISO/IEC 7811-1:1996 and implements it as the UK national standard. It supers
8、edes BS 7106-1:1989 which is withdrawn. This Part of BS EN ISO/IEC 7811-1 is published under the direction of the DISC Board whose Technical Committee IST/17 has responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on inte
9、rpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. NOTEInternational and European Standards, as well as overseas standards, are available from Customer Services, BSI, 389 Chiswick High Road, Lond
10、on, W4 4AL. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This documen
11、t comprises a front cover, an inside front cover, pages i and ii, the EN title page, page 2, the ISO/IEC title page, pages ii to iv, pages 1 to 24, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indica
12、ted in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 15 05:31:26 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO/IEC 7811-1 July 1996 ICS 35.240.40 Descriptors: Data processing, data storage devi
13、ces, banking documents, financial documents, identification cards, recording, representation of characters, embossing specifications. English version Identification cards Recording technique Part 1: Embossing (ISO/IEC 7811-1:1995) Cartes didentification Technique denregistrement Partie 1: Estampage
14、(ISO/IEC 7811-1:1995) Identifikationskarten Aufzeichnungstechnik Teil 1: Prgen von Schriftzeichen (ISO/IEC 7811-1:1995) This European Standard was approved by CEN on 1996-05-22. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this E
15、uropean Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (Engl
16、ish, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, F
17、inland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050
18、 Brussels 1996 All rights of reproduction and communication in any form and by any means reserved in all countries to CEN and its members. Ref. No. EN ISO/IEC 7811-1:1996 E Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 15 05:31:26 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO/IEC 7811-1:19
19、96 BSI 10-1998 2 Foreword The text of the International Standard from Technical Committee ISO/IEC/JTC 1, Information technology, of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC) has been taken over as a European Standard by the Techn
20、ical Board of CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 1997, and conflicting national standards shall be withdrawn at the latest by January 1997. According to the CEN/CENELEC I
21、nternal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the Unit
22、ed Kingdom. NOTENormative references to International Standards are listed in annex ZA (normative) Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 15 05:31:26 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 15 05:31:26 GMT+00:00 2006, Uncontrolled C
23、opy, (c) BSI EN ISO/IEC 7811-1:1996 ii Contents Page Forewordiii Introduction1 1Scope1 2Conformance1 3Normative references1 4Definitions1 5Visually and machine readable characters1 6Visually readable characters3 Annex A (normative) Pictorial representation of numeric data3 Annex B (normative) 7 B Pr
24、int specifications3 Annex C (normative) Printed image of the 7 B font5 Table 1 Relief height of unused embossed cards2 Table 2 Relief height of returned embossed cards2 Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 15 05:31:26 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO/IEC 7811-1:1996 B
25、SI 10-1998iii Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards
26、through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC,
27、also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. Draft international Standards adopted by the joint technical committee are circulated to the member bodies for voting. Publication as an International Standard
28、 requires approval by at least 75 % of the national bodies casting a vote. International Standard ISO/IEC 7811-1 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 17, Identification cards and related devices. This second edition cancels and replaces the
29、 first edition (ISO 7811-1:1985), of which it constitutes a technical revision. ISO/IEC 7811 consists of the following parts, under the general title Identification cards Recording technique: Part 1: Embossing; Part 2: Magnetic stripe; Part 3: Location of embossed characters on ID-1 cards; Part 4: L
30、ocation of read-only magnetic tracks Tracks 1 and 2; Part 5: Location of read-write magnetic tracks Track 2. Annexes A to C form an integral part of this part of ISO/IEC 7811. Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 15 05:31:26 GMT+00:00 2006, Uncontrolled Copy, (c) BSI iv blank Licensed
31、 Copy: sheffieldun sheffieldun, na, Wed Nov 15 05:31:26 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO/IEC 7811-1:1996 BSI 10-19981 Introduction ISO/EC 7811 is one of a series of standards describing the parameters for identification cards as defined in clause 4 and the use of such cards for inte
32、rnational interchange. 1 Scope This part of ISO/IEC 7811 specifies requirements for embossed characters on identification cards. The embossed characters are intended for transfer of data either by use of imprinters or by visual or machine reading. ISO/IEC 10373, specifies the test procedures used to
33、 check cards against the parameters specified in this part of ISO/IEC 7811. This part of ISO/IEC 7811 specifies the requirements for cards used for identification. It takes into consideration both human and machine aspects and states minimum requirements. NOTENumeric values in the SI and/or Imperial
34、 measurement system in this part of ISO/IEC 7811 may have been rounded off and therefore are consistent with, but not exactly equal to, each other. Either system may be used, but the two should not be intermixed or reconverted. The original design was made using the Imperial measurement system. 2 Co
35、nformance An identification card is in conformance with this part of ISO/IEC 7811 if it meets all mandatory requirements specified herein. A prerequisite for conformance with this part of ISO/IEC 7811 is conformance with ISO/IEC 7810. 3 Normative references The following standards contain provisions
36、 which, through reference in this text, constitute provisions of this part of ISO/IEC 7811. At the time of publication the editions indicated were valid. All standards are subject to revision and parties to agreements based on this part of ISO/IEC 7811 are encouraged to investigate the possibility o
37、f applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. ISO 1073-1:1976, Alphanumeric character sets for optical recognition Part 1: Character set OCR-A Shapes and dimensions of the printed image. ISO
38、 1073-2:1976, Alphanumeric character sets for optical recognition Part 2: Character set OCR-B Shapes and dimensions of the printed image. ISO 1831:1980, Printing specifications for optical character recognition. ISO/IEC 7810:1995, Identification cards Physical characteristics. ISO/IEC 7811-3:1995, I
39、dentification cards Recording technique Part 3: Location of embosed characters on ID-1 cards. ISO/IEC 10373:1993, Identification cards Test methods. 4 Definitions For the purposes of this part of ISO IEC 7811, the definition of “identification card” given in ISO/IEC 7810 and the following definition
40、s apply. 4.1 embossing to raise characters in relief from the front surface of a card 4.2 unused card card which has been embossed with all the characters required for its intended purpose but has not been issued 4.3 returned card embossed card after it has been issued to the card holder and returne
41、d for the purpose of testing 5 Visually and machine readable characters 5.1 Character set and type font The numeric characters of one of the following type fonts shall be used for embossed characters intended for visual and/or machine reading, either directly from the card or from card imprints (see
42、 annex A): ISO 1073-1, OCR-A, Sizes I and IV; ISO 1073-2, OCR-B, Sizes I and IV; Type font 7B as described in annexes B and C. NOTETo ensure system compatibility in the choice of font, the attention of intending users is drawn to the necessity of agreement with their potential interchange partners.
43、Print specifications are given in ISO 1831. 5.2 Character spacing The character spacing shall be: 3,63 mm 0,15 mm (0,143 in 0,006 in) 5.3 Character height Maximum height at the printing surface of the embossed characters, encompassing centreline skew and character misalignment shall be: 4,32 mm (0,1
44、70 in) Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 15 05:31:26 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO/IEC 7811-1:1996 2 BSI 10-1998 5.4 Relief height of embossed characters Relief height of imprinting character surfaces above the card surface as measured from the non-embossed surf
45、ace of the card to the highest point on the embossed character is shown in Table 1 for unused cards and Table 2 for used cards. 6 Visually readable characters (Not intended to be machine readable.) 6.1 Character set and type font A type font such as the alphanumeric, capital characters in ISO 1073-2
46、, OCR-B, Size I, should be used for embossed characters intended for visually reading directly from the card or from card imprints. 6.2 Character spacing The character spacing shall be: 2,54 mm 0,15 mm (0,100 in 0,006 in) 6.3 Relief height of embossed characters Relief height of imprinting character
47、 surfaces above the card surface as measured from the non-embossed surface of the card to the highest point on the embossed character is shown in Table 1 for unused cards and Table 2 for returned cards. NOTETable 2 shows only the limits within which cards will function normally, and does not imply a
48、ny guarantee of relief height during the valid term for issued cards. Table 1 Relief height of unused embossed cards Table 2 Relief height of returned embossed cards Visually and machine readable characters Visually readable characters mm (in)mm (in) Visually and machine readable characters Visually
49、 readable characters mm (in)mm (in) 0,48 0 0,08 0,019 0 0,003 0,46 0 0,1 0,018 0 0,004 0,48 0 0,18 0,019 0 0,007 0,46 0 0,2 0,018 0 0,008 Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 15 05:31:26 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO/IEC 7811-1:1996 BSI 10-19983 Annex A (normative) Pictorial representation of numeric data Annex B (normative) 7 B Print specifications B.1 Character set 7 B Font The 7 B font consists of the following characters: