《BS-EN-ISO-13628-6-2006.pdf》由会员分享，可在线阅读，更多相关《BS-EN-ISO-13628-6-2006.pdf（134页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 13628-6:2006 Petroleum and natural gas industries Design and operation of subsea production systems Part 6: Subsea production control systems The European Standard EN ISO 13628-6:2006 has the status of a British Standard ICS 75.180.10 ? Licensed Copy: sheffieldun sheffield
2、un, na, Sun Nov 19 15:51:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 13628-6:2006 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2006 BSI 2006 ISBN 0 580 48470 X National foreword This British Standard is the official Engl
3、ish language version of EN ISO 13628-6:2006. It is identical with ISO 13628-6:2006. It supersedes BS ISO 13628-6:2000 which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee PSE/17, Materials and equipment for petroleum, petrochemical and natural gas industri
4、es, to Subcommittee PSE/17/-/4, Drilling and production equipment, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications refe
5、rred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provi
6、sions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation,
7、 or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages i
8、i to v, a blank page, pages 1 to 123 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:51:03 GMT+00:00 2006, Uncontroll
9、ed Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 13628-6 May 2006 ICS 75.180.10 English Version Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems (ISO 13628-6:2006) Industries du ptrole et du
10、gaz naturel - Conception et exploitation des systmes de production immergs - Partie 6: Commandes pour quipements immergs (ISO 13628- 6:2006) Erdl- und Erdgasindustrie - Auslegung und Betrieb von Unterwasser-Frdersystemen - Teil 6: Steuersysteme fr die Unterwasser-Produktion (ISO 13628-6:2006) This E
11、uropean Standard was approved by CEN on 20 April 2006. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
12、concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its
13、 own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxe
14、mbourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2006 CENAll ri
15、ghts of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 13628-6:2006: E Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:51:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Foreword This document (EN ISO 13628-6:2006) has been prepared by
16、Technical Committee ISO/TC 67 “Materials, equipment and offshore structures for petroleum and natural gas industries“ in collaboration with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries“, the secretariat of which i
17、s held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2006, and conflicting national standards shall be withdrawn at the latest by November 2006. According to the CEN/CENELEC I
18、nternal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Ne
19、therlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Endorsement notice The text of ISO 13628-6:2006 has been approved by CEN as EN ISO 13628-6:2006 without any modifications. EN ISO 13628-6:2006 Licensed Copy: sheffieldun sheffieldun, na,
20、Sun Nov 19 15:51:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Reference number ISO 13628-6:2006(E) INTERNATIONAL STANDARD ISO 13628-6 Second edition 2006-05-15 Petroleum and natural gas industries Design and operation of subsea production systems Part 6: Subsea production control systems Industries
21、 du ptrole et du gaz naturel Conception et exploitation des systmes de production immergs Partie 6: Commandes pour quipements immergs EN ISO 13628-6:2006 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:51:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii Licensed Copy: sheffieldun sheffield
22、un, na, Sun Nov 19 15:51:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI iii Contents Page Foreword. v 1 Scope . 1 2 Normative references. 2 3 Terms and definitions. 3 4 Abbreviated terms 6 5 System requirements . 8 5.1 General. 8 5.2 Concept development 8 5.3 Production control system functionality r
23、equirement 8 5.4 General requirements. 10 5.5 Functional requirements 17 5.6 Design requirements 21 6 Surface equipment 25 6.1 General. 25 6.2 General requirements. 26 6.3 Functional requirements 26 6.4 Design requirements 26 7 Subsea equipment 34 7.1 General. 34 7.2 General requirements. 34 7.3 Fun
24、ctional requirements 34 7.4 Design requirements 34 8 Interfaces. 44 8.1 General. 44 8.2 Interface to host facility 44 8.3 Interface to subsea equipment 45 8.4 Interface to workover control system. 46 8.5 Interface to intelligent wells. 46 9 Materials and fabrication . 50 9.1 General. 50 9.2 Material
25、s 50 9.3 Fabrication. 51 10 Quality 52 11 Testing . 52 11.1 General. 52 11.2 Qualification testing . 52 11.3 Factory acceptance tests (FAT) 56 11.4 Integrated system tests 59 11.5 Documentation 60 12 Marking, packaging, storage and shipping 60 12.1 Marking 60 12.2 Packaging 60 12.3 Storage and shipp
26、ing. 61 Annex A (informative) Types and selection of control system 63 Annex B (informative) Typical control and monitoring functions. 66 EN ISO 13628-6:2006 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:51:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI iv Annex C (informative) Properties
27、 and testing of control fluids.68 Annex D (informative) Operational considerations with respect to flowline pressure exposure 96 Annex E (normative) Interface to intelligent well98 Annex F (informative) Definition of subsea electromagnetic environment and guidance on the selection of tests, limits a
28、nd severity to provide a presumption of compliance of subsea equipment104 Bibliography .121 EN ISO 13628-6:2006 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:51:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI v Foreword ISO (the International Organization for Standardization) is a worldwid
29、e federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that
30、 committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in ac
31、cordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard req
32、uires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 13628-6 was prepared by Tech
33、nical Committee ISO/TC 67, Materials, equipment and offshore structures for petroleum and natural gas industries, Subcommittee SC 4, Drilling and production equipment. This second edition cancels and replaces the first edition (ISO 13628-6:2000) which has been technically revised. ISO 13628 consists
34、 of the following parts, under the general title Petroleum and natural gas industries Design and operation of subsea production systems: Part 1: General requirements and recommendations Part 2: Unbonded flexible pipe systems for subsea and marine applications Part 3: Through flowline (TFL) systems P
35、art 4: Subsea wellhead and tree equipment Part 5: Subsea umbilicals Part 6: Subsea production control systems Part 7: Completion/workover riser systems Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems Part 9: Remotely Operated Tools (ROT) intervention systems Part 10:
36、Specification for bonded flexible pipe Part 11: Flexible pipe systems for subsea and marine applications Part 12 on dynamic production risers is in preparation. EN ISO 13628-6:2006 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:51:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI blank Licens
37、ed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:51:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 1 Petroleum and natural gas industries Design and operation of subsea production systems Part 6: Subsea production control systems 1 Scope This part of ISO 13628 is applicable to design, fabrication,
38、 testing, installation and operation of subsea production control systems. This part of ISO 13628 covers surface control system equipment, subsea-installed control system equipment and control fluids. This equipment is utilized for control of subsea production of oil and gas and for subsea water and
39、 gas injection services. Where applicable, this part of ISO 13628 can be used for equipment on multiple-well applications. This part of ISO 13628 establishes design standards for systems, subsystems, components and operating fluids in order to provide for the safe and functional control of subsea pr
40、oduction equipment. This part of ISO 13628 contains various types of information related to subsea production control systems. They are informative data that provide an overview of the architecture and general functionality of control systems for the purpose of introduction and information; basic pr
41、escriptive data that shall be adhered to by all types of control system; selective prescriptive data that are control-system-type sensitive and shall be adhered to only when they are relevant; optional data or requirements that need be adopted only when considered necessary either by the purchaser o
42、r the vendor. In view of the diverse nature of the data provided, control system purchasers and specifiers are advised to select from this part of ISO 13628 only the provisions needed for the application at hand. Failure to adopt a selective approach to the provisions contained herein can lead to ov
43、erspecification and higher purchase costs. Rework and repair of used equipment are beyond the scope of this part of ISO 13628. EN ISO 13628-6:2006 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 15:51:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 2 2 Normative references The following referen
44、ced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 3722, Hydraulic fluid power Fluid sample containers Qualifying and
45、 controlling cleaning methods ISO 4406:1999 Hydraulic fluid power Fluids Method for coding the level of contamination by solid particles ISO 7498 (all parts), Information processing systems Open Systems Interconnection Basic Reference Model ISO 9606-1, Approval testing of welders Fusion welding Part
46、 1: Steels ISO 9606-2, Qualification test of welders Fusion welding Part 2: Aluminium and aluminium alloys ISO 10423, Petroleum and natural gas industries Drilling and production equipment Wellhead and christmas tree equipment ISO 10945, Hydraulic fluid power Gas-loaded accumulators Dimensions of ga
47、s ports ISO/TR 10949, Hydraulic fluid power Component cleanliness Guidelines for achieving and controlling cleanliness of components from manufacture to installation ISO 13628-4, Petroleum and natural gas industries Design and operation of subsea production systems Part 4: Subsea wellhead and tree e
48、quipment ISO 13628-5, Petroleum and natural gas industries Design and operation of subsea production systems Part 5: Subsea umbilicals ISO 15607, Specification and qualification of welding procedures for metallic materials General rules ISO 15609-2, Specification and qualification of welding procedu
49、res for metallic materials Welding procedure specification Part 2: Gas welding ISO 15610, Specification and qualification of welding procedures for metallic materials Qualification based on tested welding consumables ISO 15611, Specification and qualification of welding procedures for metallic materials Qualification based on previous welding experience ISO 15612, Specification and qualification of wel