《BS-ISO-15645-2002.pdf》由会员分享，可在线阅读，更多相关《BS-ISO-15645-2002.pdf（18页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS ISO 15645:2002 Road construction and maintenance equipment Road milling machinery Terminology and commercial specifications ICS 91.220 ? Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 08:35:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS ISO 15645:2002 This British Stand
2、ard, having been prepared under the direction of the Building and Civil Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 9 August 2002 BSI 9 August 2002 ISBN 0 580 40203 7 National foreword This British Standard rep
3、roduces verbatim ISO 15645:2002 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee B/513, Construction equipment and plant, and site safety, which has the responsibility to: A list of organizations represented on this committee
4、 can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility
5、of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. ai
6、d enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages Th
7、is document comprises a front cover, an inside front cover, the ISO title page, pages ii to v, a blank page, pages 1 to 9, and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licens
8、ed Copy: sheffieldun sheffieldun, na, Mon Nov 27 08:35:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI INTERNATIONAL STANDARD ISO 15645 First edition 2002-05-01 Reference number ISO 15645:2002(E) Road construction and maintenance equipment Road milling machinery Terminology and commercial specificatio
9、ns quipement pour la construction et lentretien des routes Fraiseuses Terminologie et spcifications commerciales BS ISO 15645:2002 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 08:35:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO :54651(2002)E ii ISO 2002 Ar llithgr seresvde FDP dicslaim
10、re This FDP fam elitnoc yt deddebme niayfep.seca In roccatiw ecnadA hycilop gnisnecil sebod, thf sim eliarp eb ytnieiv ro dewb detu sllah ton eb tidesselnu de tt ehyfepseca hwich rae meil era deddebct desnetsni dna olat no delmoc ehtupre epfrromign tide ehti.gn In odaolnwding htis life, rapticca set
11、pe trehiet neh serilibisnopty fo ton fnirisebodA gnign ilop gnisnecilcy. TI ehSO tneCrceS larteraita catpecon s illibayti in ihts aera. ebodA si t armedarak fo dAS ebotsysme Inroctarop.de teDailfo s tfos ehtware prtcudos t desuo crtaet ehFDP si ff eb nac elit ni dnuoG ehlarene Info talerive to tf eh
12、;eli teh PDF-rctaeirap nomateers weer tpof dezimior rptnii.gn vErec yaeeb sah ert nakt neo rusnet etah tf ehi elis tiusbaf elob esu ry ISO merebm seidob. In the kilnuley evtne ttah a borpmel talerign to ti f si,dnuo saelpfni erom teh tneCS larterceratai ta thserdda es igvne olebw. ISO 2002 Ar lliese
13、r sthgrvsselnU .de torehceps esiwfi,dei rap ont iht fos bupliactim noarper eb yro decudo tuzilina ni dey from b roy nasnaem y, tcelernahcem ro cinoicla, inclidung tohppocoying m dnaicrfomli, tiwtuoh permini noiss wrtif gnirmo ietI rehSO ta tserdda eheb slow or SIsO memreb ydob in toc ehtnury fo tr e
14、htseuqeer. ISO copyrithg fofiec tsop esaCela 65 G 1121-HCeneva 02 T.le + 22 14 10 947 11 Fxa + 14 47 2290 9 74 E-liam cpoyrigthsio.ch Web wwwsi.oc.h BS ISO 15645:2002 ii Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 08:35:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO 46512002:5)E( ISO 2
15、002 r llAithgs reservde iii Contents Page 1Scope . 1 2Terms and definitions 1 3Description of milling machine components . 2 3.1General 2 3.2Design of milling machine types 2 4Commercial specifications 3 4.1Characteristics of the traction and transport vehicle 3 4.2Cutting and milling system charact
16、eristics . 4 4.3Drum sprinkler device 5 4.4System to remove or cordon aggregate materials . 5 BS ISO 15645:2002 iii Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 08:35:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO :54651(2002)E vi ISO 2002 Ar llithgr seresvde Foreword ISO (the Internati
17、onal Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been
18、 established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standa
19、rdization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at leas
20、t 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. International Standard ISO 15645 was prepar
21、ed by Technical Committee ISO/TC 195, Building construction machinery and equipment. BS ISO 15645:2002 iv Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 08:35:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO 46512002:5)E( ISO 2002 r llAithgs reservde v Introduction This International Standa
22、rd deals with road milling machinery used in the retread process, which is carried out in road maintenance. It provides definitions of the milling machine itself and its components, and technical characteristics. It includes figures showing milling machines with a loading device and the positioning
23、of work tools in a rotor. BS ISO 15645:2002 v Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 08:35:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 08:35:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ANRETNIITOTS LANDNADRAISO 46512002:5)E(
24、ISO 2002 r llAithgs reservde 1 Road construction and maintenance equipment Road milling machinery Terminology and commercial specifications 1Scope This International Standard establishes the terminology, functions, types and characteristics of road milling machinery. It is applicable to the planing
25、of pavements made of concrete, asphalt and similar materials with a view to removing them. 2Terms and definitions For the purposes of this International Standard, the following terms and definitions apply. 2.1 road milling machinery mobile road construction machine used to mill materials from paved
26、surfaces 2.2 road milling carrier machine carrying all the systems constituting the road milling machine, distributing the necessary power to operate the different devices and to ensure movement during work and transfer 2.3 cutting and milling system power-driven cylindrical bodies on which the mill
27、ing tools are fitted NOTEThe cylindrical bodies rotate during the milling operation. The tools are mostly cooled by a water sprinkler device. 2.4 levelling system automatic or manual system used to obtain and maintain the geometry of the bottom of the cut NOTEThe geometry of the bottom refers to bot
28、h the longitudinal and cross-sections. The geometrical reference is taken from the existing section or from a specific layout. 2.5 system to remove or make a cordon of aggregate material transport system for removal and storage of loose material NOTEThe material is removed by either a front-, rear-
29、or side-loading system, or is deposited as a cordon at the side or the back of the road milling machine. 2.6 operating mass mass of the base machine with all standard equipment, with or without cab, with or without ROPS, etc., with operator () and full fuel tank, and all fluid systems at their rated
30、 capacities and, when applicable, with sprinkler water tank half full 75 kg BS ISO 15645:2002 1 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 08:35:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO :54651(2002)E 2 ISO 2002 Ar llithgr seresvde 3Description of milling machine components 3.1Ge
31、neral The machine is usually equipped with all the following devices: traction and transport system; cutting and milling system; levelling system; system to remove or cordon aggregate material. 3.2Design of milling machine types 3.2.1Traction and transport system The description shall include the ty
32、pe of ground drive system (wheels, tracks, etc.), the total number and position of wheels or tracks, the number and position of drive wheels or tracks, and the number and position of guiding wheels or tracks. The position of the rotor in relation to the wheels or tracks and the loading device is sho
33、wn in Figures 1 and 2. 3.2.2Cutting and milling system The cutting and milling system comprises a rotor chamber and a drum sprinkler device (see Figure 3). 3.2.3Rotor drive methods These may be hydraulic, hydromechanical, or mechanical (right and/or left), or may depend on the direction of rotation
34、of the rotor in relation to the direction of movement. 3.2.4Layout of tools The layout of tools on the rotor is determined by the distance between two successive steps in the cross-section (Figure 2). 3.2.5System for levelling and control of working depth The following characteristics shall be given
35、: level reference (ground, machine element, cord or others); type of sensors (laser, ultrasound, electronic or hydraulic); adjustment; manual; automatic. 3.2.6System to remove or cordon aggregate materials The description shall include the types of conveyors, their drives and the methods of position
36、ing. BS ISO 15645:2002 2 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 08:35:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO 46512002:5)E( ISO 2002 r llAithgs reservde 3 4Commercial specifications 4.1Characteristics of the traction and transport vehicle 4.1.1Dimensional characteristics Th
37、e dimensions shown in Figure 1 shall be specified: overall length with removal system, (mm); overall length without removal system, (mm); overall width in working order (without removal system), (mm); overall height (without removal system), (mm); maximum front overhang (with removal system), (mm);
38、rear overhang, (mm); inside turning radius, (mm); outside turning radius, (mm); distance between the rotor axis and the front wheels/tracks axis, (mm); distance between the rotor axis and the rear wheels/tracks axis, (mm); inside slewing radius of the rotor, (mm); outside slewing radius of the rotor
39、, (mm); maximum loading height, (mm); slewing angle of the removal system, (degrees) side-shift of the rotor to the chassis (for machines with side-shifted rotor) (mm). 4.1.2Shipping dimensions (overall) The following dimensions shall be specified: length (mm); width (mm); height (mm). 4.1.3Mass cha
40、racteristics The following characteristics shall be given: load shipping mass (kg); operating mass (kg); other masses (all in kg) on front axle, on rear axle, cab, protective structure, pumping and liquid adding device. l1 l2 b1 h1 l6 l3 r1 r2 l5 l4 r3 r4 h2 BS ISO 15645:2002 3 Licensed Copy: sheffi
41、eldun sheffieldun, na, Mon Nov 27 08:35:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO :54651(2002)E 4 ISO 2002 Ar llithgr seresvde 4.1.4Engine characteristics The following characteristics shall be given: engine brand and type; power (kW); revolutions (r/min); cooling type. 4.1.5Transmission cha
42、racteristics The following characteristics shall be given: number of axles; number of driving axles; mechanical transmission; maximum working speed (km/h); maximum transfer speed (km/h). 4.1.6Position of steering This shall be specified as front, or rear. 4.1.7Characteristics and type of tyres or tr
43、acks This shall be specified as front, or rear. 4.1.8Tank characteristics The following characteristics shall be given: fuel tank capacity (dm3); hydraulic oil tank capacity (dm3); water tank capacity (dm3). 4.2Cutting and milling system characteristics The following characteristics shall be given (
44、see Figures 2 and 3): overall length (mm); working width of rotor, (mm); diameter of rotor with tools, (mm); number of tools; type of tools (with bits of sintered carbide): l7 d1 BS ISO 15645:2002 4 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 08:35:24 GMT+00:00 2006, Uncontrolled Copy, (c
45、) BSI ISO 46512002:5)E( ISO 2002 r llAithgs reservde 5 tool in form of wand (for surfaces of cement and concrete), tool in form of mushroom (for surfaces of asphalt and concrete); tool attachment method; direction of rotor rotation; revolutions of rotor (min1); peripheral speeds at the end of tools
46、(m/min); depth of cut in one pass, (mm); permissible transverse tilt angle of the chassis (in relation to the horizontal) (degrees); maximum rotor tilt in vertical plane (degrees); rotor drive method hydraulic, hydromechanical, mechanical; layout of tools step (mm); system of control of working dept
47、h level reference (ground, machine element, cord or others), type of sensors (laser, ultrasound, infrared or others), adjustment of working depth (manual, automatic). 4.3Drum sprinkler device The following characteristics shall be given: water pump delivery (m3/min); pressure in water supply system
48、(MPa); number of spray nozzles. 4.4System to remove or cordon aggregate materials The following characteristics shall be given: type of conveyor (belt, drag slat or other); output of conveyor (kg/h); width of conveyor (mm); conveyor drive method (hydraulic, hydromechanical, mechanical); system of conveyor positioning (hydraulic, hydromechanical, mechanical) overall length with removal system folded (mm). h3 BS ISO 15645:2002 5 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 27 08:35:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO :54651(2002)E 6 ISO