《BS-EN-754-6-1996.pdf》由会员分享，可在线阅读，更多相关《BS-EN-754-6-1996.pdf（10页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 754-6:1996 Aluminium and aluminium alloys Cold drawn rod/bar and tube Part 6: Hexagonal bars, tolerances on dimensions and form The European Standard EN 754-6:1995 has the status of a British Standard ICS 77.120.10 77.140.90 Licensed Copy: sheffieldun sheffieldun, na, Tue Nov
2、07 06:01:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 754-6:1996 This British Standard, having been prepared under the direction of the Engineering Sector Board, was published under the authority of the Standards Board and comes into effect on 15 June 1996 BSI 12-1998 The following BSI refere
3、nces relate to the work on this standard: Committee reference NFE/35 Draft for comment 92/41469 DC ISBN 0 580 25780 0 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee NFE/35, Light metals and their alloys, upon which the f
4、ollowing bodies were represented: Aluminium Federation Aluminium Stockholders Association London Metal Exchange Magnesium Industry Council Ministry of Defence The following bodies were also represented in the drafting of the standard, through subcommittees and panels: Association of British Welded A
5、luminium Tube Makers Association of Light Alloy Refiners Limited Institution of Structural Engineers Metal Packaging Manufacturers Association Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Tue Nov 07 06:01:52 GMT+00:00 2006, Uncontrolled Copy, (
6、c) BSI BS EN 754-6:1996 BSI 12-1998i Contents Page Committees responsible Inside front cover National foreword ii Foreword2 Text of EN 754-63 Licensed Copy: sheffieldun sheffieldun, na, Tue Nov 07 06:01:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 754-6:1996 ii BSI 12-1998 National foreword T
7、his Part of BS EN 754 has been prepared by Technical Committee NFE/35 and is the English language version of EN 754-6:1995 Aluminium and aluminium alloys Cold drawn rod/bar and tube Part 6: Hexagonal bars, tolerances on dimensions and form. This Part of BS EN 754 is published with: BS EN 754, Alumin
8、ium and aluminium alloys Cold drawn rod/bar and tube. BS EN 754-3, Round bars, tolerances on dimensions and form BS EN 754-4, Square bars, tolerances on dimensions and form. BS EN 754-5, Rectangular bars, tolerances on dimensions and form. BS EN 755, Aluminium and aluminium alloys Extruded rod/bar,
9、tube and profiles. BS EN 755-3, Round bars, tolerances on dimensions and form. BS EN 755-4, Square bars, tolerances on dimensions and form. BS EN 755-5, Rectangular bars, tolerances on dimensions and form. BS EN 755-6, Hexagonal bars, tolerances on dimensions and form. As a result, the following sta
10、ndards are partially superseded by those listed above. European Standards should be used in preference whenever possible. BS 1471:1972, Specification for wrought aluminium and aluminium alloys Drawn tube. BS 1474:1987, Specification for wrought aluminium and aluminium alloys for general engineering
11、purposes Bars, extruded round tubes and sections. BS 4300, Wrought aluminium alloys for general engineering purposes (supplementary series). BS 4300-4:1973, 6463 Solid extruded bars and sections suitable for bright trim/reflector applications. BS 4300-5:1973, 2011 Free cutting bar and wire. BS 4300-
12、10:1969, 5454 Drawn tube. BS 4300-12:1969, 5454 Bar, extruded round tube and sections. BS 4300-15:1973, 7020 Bar, extruded round tube and sections. BS 2898:1970, Specification for wrought aluminium and aluminium alloys for electrical purposes Bars, extruded round tube and sections. When the followin
13、g European Standards are published the above British Standards will be withdrawn. BS EN 754, Aluminium and aluminium alloys Cold drawn rod/bar and tube. BS EN 754-1, Technical conditions for inspection and delivery. BS EN 754-2, Mechanical properties. BS EN 755, Aluminium and aluminium alloys Extrud
14、ed rod/bar, tube and profiles. BS EN 755-1, Technical conditions for inspection and delivery. BS EN 755-2, Mechanical properties. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compl
15、iance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 4 and a back cover. This standard has been updated (see copyright date) and may have h
16、ad amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Tue Nov 07 06:01:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 754-6 November 1995 ICS 77.120.10 Descr
17、iptors: Drawn products, rolled products, aluminium, aluminium alloys, metal bars, hexagonal bars, dimensions, dimensional tolerances, form tolerances English version Aluminium and aluminium alloys Cold drawn rod/bar and tube Part 6: Hexagonal bars, tolerances on dimensions and form Aluminium et alli
18、ages daluminium Barres et tubes tirs Partie 6: Barres hexagonales, tolrances sur dimensions et forme Aluminium und Aluminiumlegierungen Gezogene Stangen und Rohre Teil 6: Sechskantstangen, Grenzabmae und Formtoleranzen This European Standard was approved by CEN on 1995-09-15. CEN members are bound t
19、o comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Centr
20、al Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as t
21、he official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Euro
22、pen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1995 All rights of reproduction and communication in any form and by any means reserved in all countries to CEN and its members. Ref. No. EN 754-6:1995 E Licensed Copy: sheffieldun sheffieldu
23、n, na, Tue Nov 07 06:01:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 754-6:1995 2 BSI 12-1998 Foreword This European Standard has been drawn up by CEN/TC 132, Aluminium and aluminium alloys, whose Secretariat is held by the Association Franaise de Normalisation (AFNOR). Within its programme of w
24、ork, Technical Committee CEN/TC 132 entrusted CEN/TC 132/WG 5, Extruded and drawn products, to work out the following standard: EN 754-6, Aluminium and aluminium alloys Cold drawn rod/bar and tube Part 6: Hexagonal bars, tolerances on dimensions and form. This standard is part of a set of eight stan
25、dards. The other standards deal with: EN 754-1, Aluminium and aluminium alloys Cold drawn rod/bar and tube Part 1: Technical conditions for inspection and delivery. EN 754-2, Aluminium and aluminium alloys Cold drawn rod/bar and tube Part 2: Mechanical properties. EN 754-3, Aluminium and aluminium a
26、lloys Cold drawn rod/bar and tube Part 3: Round bars, tolerances on dimensions and form. EN 754-4, Aluminium and aluminium alloys Cold drawn rod/bar and tube Part 5: Square bars, tolerances on dimensions and form. EN 754-5, Aluminium and aluminium alloys Cold drawn rod/bar and tube Part 6: Rectangul
27、ar bars, tolerances on dimensions and form. EN 754-7, Aluminium and aluminium alloys Cold drawn rod/bar and tube Part 7: Seamless tubes, tolerances on dimensions and form. EN 754-8, Aluminium and aluminium alloys Cold drawn rod/bar and tube Part 8: Porthole tubes, tolerances on dimensions and form.
28、CEN/TC 132 met on 11 and 12 May 1993 in Paris and agreed on the text to be submitted to CEN members for formal vote. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 1996, and conflicting natio
29、nal standards shall be withdrawn at the latest by May 1996. The following countries were represented at that meeting: Belgium, Denmark, France, Germany, Italy, Netherlands, Norway, Spain, Sweden, Switzerland, United Kingdom. According to the common CEN/CENELEC Rules, the following countries are boun
30、d to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Contents Page Foreword2 1Scope3 2Tolerances on dimensions and form3 2.1Width acro
31、ss flats3 2.2Corner radii3 2.3Convexity concavity3 2.4Straightness3 2.5Twist4 2.6Length4 2.7Squareness of cut ends4 Figure 1 Measurement of deviation from straightness4 Figure 2 Measurement of twist4 Table 1 Tolerances on width across flats3 Table 2 Maximum corner radii3 Table 3 Straightness toleran
32、ces3 Table 4 Twist tolerances4 Table 5 Fixed length tolerances4 Licensed Copy: sheffieldun sheffieldun, na, Tue Nov 07 06:01:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 754-6:1995 BSI 12-19983 1 Scope This Part of EN 754 specifies the tolerances on dimensions and form for aluminium and aluminiu
33、m alloy cold drawn hexagonal bars having widths across flats in the range from 3 mm up to and including 80 mm. 2 Tolerances on dimensions and form 2.1 Width across flats The tolerances on width across flats are specified in Table 1. Table 1 Tolerances on width across flats 2.2 Corner radii Maximum c
34、orner radii are specified in Table 2. Table 2 Maximum corner radii 2.3 Convexity concavity The convexity concavity tolerances for hexagonal bar shall be included within the width across flats tolerances. 2.4 Straightness Deviations from straightness, hs and ht, shall be measured as shown in Figure 1
35、 with the bar placed on a horizontal baseplate so that its mass decreases the deviation. Straightness tolerances are specified in Table 3. For bars with width across flats less than 10 mm, the straightness tolerances shall be agreed upon between purchaser and supplier. The straightness tolerances ap
36、ply to bars with width across flats 10 mm and greater in all tempers except O and T 51. If a straightness tolerance is required for either O or T 51 temper, it shall be agreed between purchaser and supplier. Table 3 Straightness tolerances Width across flats S Tolerances FromUp to 3a 6 610 1018 1830
37、 3050 5065 6580 a Except width across flats 3 mm which may be used. 0 0,08 0 0,09 0 0,11 0 0,13 0 0,16 0 0,19 0 0,30 Dimensions in millimetres Width across flatsS FromUp toMaximum corner radii 3a 80,2 8300,4 30600,6 60800,8 a Except width across flats 3 mm which may be used. Dimensions in millimetre
38、s Width across flats S Maximum deviation from straightness ht mm/m Maximum localized kink in any 300 mm portion hs FromUp to 108020,6 Licensed Copy: sheffieldun sheffieldun, na, Tue Nov 07 06:01:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 754-6:1995 4 BSI 1998 2.5 Twist The twist measurement sh
39、all be carried out as shown in Figure 2. The twist tolerances are specified in Table 4. For bars with width across flats less than 10 mm, the twist tolerances shall be agreed upon between purchaser and supplier. The twist tolerances apply to bars with width across flats 10 mm and greater in all temp
40、ers except O and T 51. If a twist tolerance is required for either O or T 51 temper, it shall be agreed between purchaser and supplier. Table 4 Twist tolerances 2.6 Length If fixed lengths are to be supplied, this shall be stated on the order. The fixed length tolerances are specified in Table 5. Ta
41、ble 5 Fixed length tolerances If no fixed or minimum length is specified in the order, hexagonal drawn bars may be delivered in random lengths. The actual lengths and tolerances on random length shall be agreed between purchaser and supplier. 2.7 Squareness of cut ends The squareness of cut ends sha
42、ll be within half of the fixed length tolerance range (Table 5) for both fixed and random length, e.g. for a fixed length tolerance of mm, the squareness of cut ends shall be within 5 mm. Figure 1 Measurement of deviation from straightness Dimensions in millimetres Width across flats S Twist toleran
43、ces T FromUp to and including Per 1 000 mm of length Over the total length 10a 3012 30801,52,5 a Except width across flats 10 mm which may be used. Dimensions in millimetres Width across flats STolerances on length FromUp toL 2 0002 000 5 000 380 + 5 0 + 7 0 + 10 0 +10 0 Figure 2 Measurement of twis
44、t Licensed Copy: sheffieldun sheffieldun, na, Tue Nov 07 06:01:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI blank Licensed Copy: sheffieldun sheffieldun, na, Tue Nov 07 06:01:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BSI 389 Chiswick High Road London W4 4AL | | | | | | | | | | | | | | | | | | |
45、 | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BSI British Standards Institution BSI is the independent national body responsible
46、for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments o
47、r editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on
48、the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications s
49、hould be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service.