《BS-EN-ISO-13680-2001.pdf》由会员分享，可在线阅读，更多相关《BS-EN-ISO-13680-2001.pdf（42页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 13680:2001 Incorporating corrigendum May 2004 Petroleum and natural gas industries Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions ICS 75.180.10; 77.140.75 ? Copyright British Standards Institution Provide
2、d by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 21:47:13 MDTNo reproduction or networking permitted without license from IHS -,-,- BS EN ISO 13680:2001 This British Standard was published under the authority of the Standards Policy and Str
3、ategy Committee on 06 February 2002 BSI 2008 ISBN 978 0 580 60864 3 National foreword This British Standard is the UK implementation of EN ISO 13680:2001. It is identical with ISO 13680:2000, incorporating corrigendum May 2004. The start and finish of text introduced or altered by corrigendum is ind
4、icated in the text by tags. Text altered by ISO corrigendum May 2004 is indicated in the text by . The UK participation in its preparation was entrusted by Technical Committee PSE/17, Materials and equipment for petroleum and natural gas industries, to Subcommittee PSE/17/-/5, Casing, tubing and dri
5、ll pipe. A list of organizations represented on this subcommittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer
6、immunity from legal obligations. Amendments/corrigenda issued since publication DateComments 30 June 2008Implementation of ISO corrigendum May 2004 and alignment of BSI and CEN publication dates Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licens
7、ee=Boeing Co/5910770001 Not for Resale, 08/14/2008 21:47:13 MDTNo reproduction or networking permitted without license from IHS -,-,- EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 13680 November 2001 ICS 75.180.10; 77.140.75 English version Petroleum and natural gas industries - Corrosion
8、-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2000) Industries du ptrole et du gaz naturel - Tubes sans soudure en acier alli rsistant la corrosion utiliss comme tubes de cuvelage, tubes de production et tubes- bauches pour ma
9、nchons - Conditions techniques de livraison (ISO 13680:2000) Erdl- und Erdgasindustrie - Nahtlose Rohre aus korrosionsbestndigen Legierungen zur Verwendung als Futter- oder Steigrohre sowie Muffenvorrohre - Technische Lieferbedingungen (ISO 13680:2000) This European Standard was approved by CEN on 9
10、 June 2001. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be o
11、btained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management
12、Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPE
13、AN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2001 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 13680:2001 E Copyright Br
14、itish Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 21:47:13 MDTNo reproduction or networking permitted without license from IHS -,-,- Foreword The text of the International Standard from Technical Committee
15、ISO/TC 67 “Materials, equipment and offshore structures for petroleum and natural gas industries“ of the International Organization for Standardization (ISO) has been taken over as an European Standard by Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum and n
16、atural gas industries“, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2002, and conflicting national standards shall be withdrawn at the latest by
17、May 2002. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, N
18、orway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of the International Standard ISO 13680:2000 has been approved by CEN as a European Standard without any modification. NOTE: Normative references to International Standards are listed in annex ZA (normati
19、ve). BS EN ISO 13680:2001 Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 21:47:13 MDTNo reproduction or networking permitted without license from IHS -,-,- ISO 08631:(0002)E iii ContentsPage
20、1Scope 1 2Normative references1 3Terms and definitions, symbols and abbreviated terms.3 3.1Terms and definitions .3 3.2Symbols5 3.3Abbreviated terms .5 4Classification6 5Information to be supplied by the purchaser .6 6Material design qualification 7 7Manufacturing process .7 7.1Manufacturing of corr
21、osion-resistant alloys 7 7.2Tube manufacturing process .7 8Requirements.8 8.1General8 8.2Chemical composition 8 8.3Mechanical properties.9 8.4Corrosion properties.11 8.5Microstructure properties.11 8.6Visual inspection .11 8.7Non-destructive examination .12 8.8Hydrostatic test12 9Dimensions, masses
22、and tolerances.13 9.1Outside diameter, wall thickness and mass.13 9.2Length.15 9.3Tolerances16 10Inspection and testing.18 10.1Types of inspection document.18 10.2Type and frequency of tests.19 10.3Purchaser inspection 20 10.4Testing of chemical composition.20 10.5Testing of mechanical and other cha
23、racteristics.20 10.6Inspection of dimensions .23 10.7Visual inspection .23 10.8Non-destructive examination (NDE) 23 10.9Invalidation of the tests.23 10.10Retests23 10.11Sorting or reprocessing23 11Test methods23 11.1Chemical analysis23 11.2Tensile test.23 11.3Hardness test.24 11.4Impact test25 11.5C
24、orrosion test 25 11.6Microstructure examination25 11.7Visual inspection .26 11.8Non-destructive examination .26 11.9Dimensional testing.27 BS EN ISO 13680:2001 Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Res
25、ale, 08/14/2008 21:47:13 MDTNo reproduction or networking permitted without license from IHS -,-,- ISO 08631:(0002)E iv 11.10Hydrostatic test29 12Marking .29 12.1General29 12.2Marking on tubes for casing, tubing and coupling stock29 12.3Colour code identification.30 13Surface treatment 32 13.1Genera
26、l32 13.2Group 1 .32 13.3Groups 2, 3 and 4.32 14Surface protection.32 15Handling, packing and storage.33 15.1General33 15.2Handling33 15.3Packing .33 15.4Storage33 15.5Complaints after delivery33 Bibliography34 BS EN ISO 13680:2001 Copyright British Standards Institution Provided by IHS under license
27、 with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 21:47:13 MDTNo reproduction or networking permitted without license from IHS -,-,- INTENRATIONAL TSANDADRISO 08631:(0002)E ISO 0002 All rights rsedevre1 Petroleum and natural gas industries Corrosion-resistant all
28、oy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions 1Scope This International Standard specifies the technical delivery conditions for corrosion-resistant alloy seamless tubes for casing, tubing and coupling stock. This International Standard is applicable to
29、 the following four groups of tube product: ? Group 1, comprised of stainless alloy with a martensitic or martensitic/ferritic structure; ? Group 2, comprised of stainless alloy with a ferritic-austenitic structure, such as duplex and super duplex stainless alloy; ? Group 3, comprised of stainless a
30、lloy with an austenitic structure (iron base); ? Group 4, comprised of nickel-based alloys with an austenitic structure (nickel base). This International Standard contains no provisions relating to the connection or other methods by which individual lengths of tube are joined to form a string. NOTET
31、he connection or joining method can influence the corrosion performance of the materials specified in this International Standard. 2Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. F
32、or dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. F
33、or undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. ISO 148, Steel Charpy impact test (V-notch). ISO 377, Steel and steel products Location and preparation of samples and test p
34、ieces for mechanical testing. ISO 404, Steel and steel products General technical delivery requirements. ISO 643, Steels Micrographic determination of the ferritic or austenitic grain size. ISO 783, Metallic materials Tensile testing at elevated temperature. ISO 3545-1, Steel tubes and fittings Symb
35、ols for use in specifications Part 1: Tubes and tubular accessories with circular cross-section. 1 BS EN ISO 13680:2001 Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 21:47:13 MDTNo reproduct
36、ion or networking permitted without license from IHS -,-,- ISO 08631:(0002)E 2 ISO 0002 All rights rsedevre ISO 4885, Ferrous products Heat treatments Vocabulary. ISO 4948-1, Steels Classification Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition. ISO 494
37、8-2, Steels Classification Part 2: Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics. ISO 6508-1, Metallic materials Rockwell hardness test Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T). ISO 6892, Metallic m
38、aterials Tensile testing at ambient temperature. ISO 6929, Steel products Definitions and classification. ISO 7539-1, Corrosion of metals and alloys Stress corrosion testing Part 1: General guidance on testing procedures. ISO 7539-2, Corrosion of metals and alloys Stress corrosion testing Part 2: Pr
39、eparation and use of bent- beam specimens. ISO 7539-3, Corrosion of metals and alloys Stress corrosion testing Part 3: Preparation and use of U-bend specimens. ISO 7539-4, Corrosion of metals and alloys Stress corrosion testing Part 4: Preparation and use of uniaxially loaded tension specimens. ISO
40、7539-5, Corrosion of metals and alloys Stress corrosion testing Part 5: Preparation and use of C-ring specimens. ISO 7539-6, Corrosion of metals and alloys Stress corrosion testing Part 6: Preparation and use of pre- cracked specimens. ISO 7539-7, Corrosion of metals and alloys Stress corrosion test
41、ing Part 7: Slow strain rate testing. ISO 8501-1:1988, Preparation of steel substrates before application of paints and related products Visual assessment of surface cleanliness Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of p
42、revious coatings. ISO 9303, Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes Full peripheral ultrasonic testing for the detection of longitudinal imperfections ISO 9304, Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes Eddy curren
43、t testing for the detection of imperfections. ISO 9305, Seamless steel tubes for pressure purposes Full peripheral ultrasonic testing for the detection of transverse imperfections. ISO 9402, Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes Full peripheral magnetic
44、transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections. ISO 9712, Non-destructive testing Qualification and certification of personnel. ISO 10124, Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes Ultrasonic test
45、ing for the detection of laminar imperfections. ISO 10474:1991, Steel and steel products Inspection documents. 2 BS EN ISO 13680:2001 Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 21:47:13 M
46、DTNo reproduction or networking permitted without license from IHS -,-,- ISO 10543, Seamless and hot-stretch-reduced welded steel tubes for pressure purposes Full peripheral ultrasonic thickness testing. ISO 11484, Steel tubes for pressure purposes Qualification and certification of non-destructive
47、testing (NDT) personnel. ISO 11496, Seamless and welded steel tubes for pressure purposes Ultrasonic testing of tube ends for the detection of laminar imperfections. ISO 11845, Corrosion of metals and alloys General principles for corrosion testing. ISO 11960, Petroleum and natural gas industries St
48、eel pipes for use as casing or tubing for wells. ISO 13665, Seamless and welded steel tubes for pressure purposes Magnetic particle inspection of the tube body for the detection of surface imperfections. ISO 14284, Steel and iron Sampling and preparation of samples for the determination of chemical composition. ASTM E 112, Standard tes