《ISO-13680-2000.pdf》由会员分享，可在线阅读，更多相关《ISO-13680-2000.pdf（44页珍藏版）》请在三一文库上搜索。
1、ICS 75.180.10; 77.140.75 Ref. No. ISO 13680:2000/Cor.2:2004(E) ISO 2004 All rights reserved Published in Switzerland INTERNATIONAL STANDARD ISO 13680:2000 TECHNICAL CORRIGENDUM 2 Published 2004-05-01 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION ORGANISATION INTERNATIONALE DE NORMALISATION Petroleu
2、m and natural gas industries Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions TECHNICAL CORRIGENDUM 2 Industries du ptrole et du gaz naturel Tubes sans soudure en acier alli rsistant la corrosion utiliss comme tubes de cuvelage, tube
3、s de production et tubes-bauches pour manchons Conditions techniques de livraison RECTIFICATIF TECHNIQUE 2 Technical Corrigendum 2 to ISO 13680:2000 was prepared by Technical Committee ISO/TC 67, Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries, Su
4、bcommittee SC 5, Casing, tubing and drill pipe. Page 3 Clause 2 Normative references Add the following reference: ISO 12095, Seamless and welded steel tubes for pressure purposes Liquid penetrant testing Correct the titles of ASTM G 48 and ASTM G 78 to read as follows: ASTM G 48-03, Standard test me
5、thods for pitting and crevice corrosion resistance of stainless steels and related alloys by use of ferric chloride solution ASTM G 78-01, Standard guide for crevice corrosion testing of iron-base and nickel-base stainless alloys in seawater and other chloride-containing aqueous environments Copyrig
6、ht International Organization for Standardization Provided by IHS under license with ISO Licensee=Rock Island Arsenal/9983967100, User=Schabilion, Shelley Not for Resale, 04/10/2007 07:17:33 MDTNo reproduction or networking permitted without license from IHS -,-,- ISO 13680:2000/Cor.2:2004(E) 2 ISO
7、2004 All rights reserved Page 22 10.5.3.5 Test pieces for corrosion test After the comma in the first two dashed list items, change the text to read: “.in accordance with ASTM G 48-03 Method A;” Page 25 11.5 Corrosion test After the comma in the list items a) and b), change the text to read: “.in ac
8、cordance with ASTM G 48-03 Method A;” Page 26 11.8.1 General Add ISO 12095 to the listing in the second paragraph, so that the second paragraph reads: “All tubes shall be non-destructively examined according to one or a combination of the following applicable International Standards: ISO 9303 (UT);
9、ISO 9304 (UT); ISO 9305 (UT); ISO 9402 (MT); ISO 10124 (UT); ISO 10543 (UT); ISO 11496 (UT); ISO 12095 (LP) and ISO 13665 (MT).” Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=Rock Island Arsenal/9983967100, User=Schabilion, Shelley Not for R
10、esale, 04/10/2007 07:17:33 MDTNo reproduction or networking permitted without license from IHS -,-,- Reference number ISO 13680:2000(E) ISO 2000 INTERNATIONAL STANDARD ISO 13680 First edition 2000-07-01 Petroleum and natural gas industries Corrosion-resistant alloy seamless tubes for use as casing,
11、tubing and coupling stock Technical delivery conditions Industries du ptrole et du gaz naturel Tubes sans soudure en acier alli rsistant la corrosion utiliss comme tubes de cuvelage, tubes de production et tubes-bauches pour manchons Conditions techniques de livraison Copyright International Organiz
12、ation for Standardization Provided by IHS under license with ISO Licensee=Rock Island Arsenal/9983967100, User=Schabilion, Shelley Not for Resale, 04/10/2007 07:17:33 MDTNo reproduction or networking permitted without license from IHS -,-,- ISO 13680:2000(E) PDF disclaimer This PDF file may contain
13、embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility
14、 of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation paramet
15、ers were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. ISO 2000 All rights reserved. Unless otherwise
16、specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright offi
17、ce Case postale 56 ? CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.ch Web www.iso.ch Printed in Switzerland ii ISO 2000 All rights reserved Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=Rock Island Arsena
18、l/9983967100, User=Schabilion, Shelley Not for Resale, 04/10/2007 07:17:33 MDTNo reproduction or networking permitted without license from IHS -,-,- ISO 13680:2000(E) ISO 2000 All rights reservediii ContentsPage 1Scope 1 2Normative references1 3Terms and definitions, symbols and abbreviated terms.3
19、3.1Terms and definitions .3 3.2Symbols5 3.3Abbreviated terms .5 4Classification6 5Information to be supplied by the purchaser .6 6Material design qualification 7 7Manufacturing process .7 7.1Manufacturing of corrosion-resistant alloys 7 7.2Tube manufacturing process .7 8Requirements.8 8.1General8 8.
20、2Chemical composition 8 8.3Mechanical properties.9 8.4Corrosion properties.11 8.5Microstructure properties.11 8.6Visual inspection .11 8.7Non-destructive examination .12 8.8Hydrostatic test12 9Dimensions, masses and tolerances.13 9.1Outside diameter, wall thickness and mass.13 9.2Length.15 9.3Tolera
21、nces16 10Inspection and testing.18 10.1Types of inspection document.18 10.2Type and frequency of tests.19 10.3Purchaser inspection 20 10.4Testing of chemical composition.20 10.5Testing of mechanical and other characteristics.20 10.6Inspection of dimensions .23 10.7Visual inspection .23 10.8Non-destr
22、uctive examination (NDE) 23 10.9Invalidation of the tests.23 10.10Retests23 10.11Sorting or reprocessing23 11Test methods23 11.1Chemical analysis23 11.2Tensile test.23 11.3Hardness test.24 11.4Impact test25 11.5Corrosion test 25 11.6Microstructure examination25 11.7Visual inspection .26 11.8Non-dest
23、ructive examination .26 11.9Dimensional testing.27 Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=Rock Island Arsenal/9983967100, User=Schabilion, Shelley Not for Resale, 04/10/2007 07:17:33 MDTNo reproduction or networking permitted without
24、license from IHS -,-,- ISO 13680:2000(E) iv ISO 2000 All rights reserved 11.10Hydrostatic test29 12Marking .29 12.1General29 12.2Marking on tubes for casing, tubing and coupling stock29 12.3Colour code identification.30 13Surface treatment 32 13.1General32 13.2Group 1 .32 13.3Groups 2, 3 and 4.32 14
25、Surface protection.32 15Handling, packing and storage.33 15.1General33 15.2Handling33 15.3Packing .33 15.4Storage33 15.5Complaints after delivery33 Bibliography34 Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=Rock Island Arsenal/9983967100,
26、User=Schabilion, Shelley Not for Resale, 04/10/2007 07:17:33 MDTNo reproduction or networking permitted without license from IHS -,-,- ISO 13680:2000(E) ISO 2000 All rights reservedv Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bod
27、ies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organization
28、s, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the I
29、SO/IEC Directives, Part 3. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that som
30、e of the elements of this International Standard may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. International Standard ISO 13680 was prepared by Technical Committee ISO/TC 67, Materials, equipment and offshore structures for petr
31、oleum and natural gas industries, Subcommittee SC 5, Casing, tubing and drill pipe. Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=Rock Island Arsenal/9983967100, User=Schabilion, Shelley Not for Resale, 04/10/2007 07:17:33 MDTNo reproduction
32、 or networking permitted without license from IHS -,-,- Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=Rock Island Arsenal/9983967100, User=Schabilion, Shelley Not for Resale, 04/10/2007 07:17:33 MDTNo reproduction or networking permitted wit
33、hout license from IHS -,-,- INTERNATIONAL STANDARDISO 13680:2000(E) ISO 2000 All rights reserved1 Petroleum and natural gas industries Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions 1Scope This International Standard specifies the
34、technical delivery conditions for corrosion-resistant alloy seamless tubes for casing, tubing and coupling stock. This International Standard is applicable to the following four groups of tube product: ? Group 1, comprised of stainless alloy with a martensitic or martensitic/ferritic structure; ? Gr
35、oup 2, comprised of stainless alloy with a ferritic-austenitic structure, such as duplex and super duplex stainless alloy; ? Group 3, comprised of stainless alloy with an austenitic structure (iron base); ? Group 4, comprised of nickel-based alloys with an austenitic structure (nickel base). This In
36、ternational Standard contains no provisions relating to the connection or other methods by which individual lengths of tube are joined to form a string. NOTEThe connection or joining method can influence the corrosion performance of the materials specified in this International Standard. 2Normative
37、references The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based o
38、n this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currentl
39、y valid International Standards. ISO 148, Steel Charpy impact test (V-notch). ISO 377, Steel and steel products Location and preparation of samples and test pieces for mechanical testing. ISO 404, Steel and steel products General technical delivery requirements. ISO 643, Steels Micrographic determin
40、ation of the ferritic or austenitic grain size. ISO 783, Metallic materials Tensile testing at elevated temperature. ISO 3545-1, Steel tubes and fittings Symbols for use in specifications Part 1: Tubes and tubular accessories with circular cross-section. Copyright International Organization for Stan
41、dardization Provided by IHS under license with ISO Licensee=Rock Island Arsenal/9983967100, User=Schabilion, Shelley Not for Resale, 04/10/2007 07:17:33 MDTNo reproduction or networking permitted without license from IHS -,-,- ISO 13680:2000(E) 2 ISO 2000 All rights reserved ISO 4885, Ferrous produc
42、ts Heat treatments Vocabulary. ISO 4948-1, Steels Classification Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition. ISO 4948-2, Steels Classification Part 2: Classification of unalloyed and alloy steels according to main quality classes and main property
43、or application characteristics. ISO 6508-1, Metallic materials Rockwell hardness test Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T). ISO 6892, Metallic materials Tensile testing at ambient temperature. ISO 6929, Steel products Definitions and classification. ISO 7539-1, Corrosion of m
44、etals and alloys Stress corrosion testing Part 1: General guidance on testing procedures. ISO 7539-2, Corrosion of metals and alloys Stress corrosion testing Part 2: Preparation and use of bent- beam specimens. ISO 7539-3, Corrosion of metals and alloys Stress corrosion testing Part 3: Preparation a
45、nd use of U-bend specimens. ISO 7539-4, Corrosion of metals and alloys Stress corrosion testing Part 4: Preparation and use of uniaxially loaded tension specimens. ISO 7539-5, Corrosion of metals and alloys Stress corrosion testing Part 5: Preparation and use of C-ring specimens. ISO 7539-6, Corrosi
46、on of metals and alloys Stress corrosion testing Part 6: Preparation and use of pre- cracked specimens. ISO 7539-7, Corrosion of metals and alloys Stress corrosion testing Part 7: Slow strain rate testing. ISO 8501-1:1988, Preparation of steel substrates before application of paints and related prod
47、ucts Visual assessment of surface cleanliness Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings. ISO 9303, Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes Full peripheral ultr
48、asonic testing for the detection of longitudinal imperfections ISO 9304, Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes Eddy current testing for the detection of imperfections. ISO 9305, Seamless steel tubes for pressure purposes Full peripheral ultrasonic testing for the d