《ISO-366-3-1988.pdf》由会员分享，可在线阅读，更多相关《ISO-366-3-1988.pdf（8页珍藏版）》请在三一文库上搜索。
1、INTERNATIONAL STANDARD INTERNATIONAL ORGANIZATION FOR STANDARDIZATION ORGANISATION INTERNATIONALE DE NORMALlSATlON MEXAYHAPOJJHAR OPrAHM3AMR I-IO CTAHaAPTM3AuMM Textile machinery and accessories - Reeds - Part 3 : Metal reeds with do.uble-spring baulk - Dimensions and designation Mat Part 2: Metal r
2、eeds with plate baulk - Dimensions and designation. Part 3: Metal reeds with double-spring baulk - Dimensions and designation. (This part of IS0 366.) b) reference to this part of IS0 366, i.e. IS0 366-3; c) the overall depth of the reed (h); d) the thickness of the reed baulk (d); 1 Scope and field
3、 of application This part of IS0 366 specifies the dimensions and designation of metal reeds with double-spring baulk for use in the textile industry. e) the width of the dents of the reed (b); f) the type of steel used for the dents of the reed, in accordance with IS0 9473, i.e. plain or stainless.
4、 Example : The strip steel used in the manufacture of dents of reeds is the subject of IS0 9473. 2 Reference A metal reed with double-spring baulk of overall depth h = 150 mm, of thickness of reed baulk d = 8 mm, and having dents of width b = 4 mm, made of stainless steel, shall be designated as fol
5、lows: IS0 9473, Textile machinery and accessories - Strip steel for dents of reeds. Metal reed with double-spring baulk IS0 366-3 150 x 8 x 4 stainless 3 Dimensions The dimensions of metal reeds with double-spring baulk are shown on the figure and are given in the table. Copyright International Orga
6、nization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/26/2007 19:57:03 MDTNo reproduction or networking permitted without license from IHS -,-,- IS0 366-3 : 1988 (E) Usable width I Overall width of reed b, Width of end p
7、iece c 3 In I e II . f Q, -c b = width of dents of reed d = thickness of reed baulk (approximate value, depends on the thickness or diameter of the wire) e = inside depth of reed h = overall depth of reed Figure - Metal reed with double-spring baulk Table - Dimensions Dimensions in millimetres I I I
8、 I 110 X x x x 130 Ix Ix Ix 1x1 160 x x x 1) In accordance with IS0 9473. NOTE - The values in parentheses should be avoided wherever possible. 2 Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Res
9、ale, 04/26/2007 19:57:03 MDTNo reproduction or networking permitted without license from IHS -,-,- This page intentionally left blank Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/26/2
10、007 19:57:03 MDTNo reproduction or networking permitted without license from IHS -,-,- This page intentionally left blank Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/26/2007 19:57:03
11、 MDTNo reproduction or networking permitted without license from IHS -,-,- This page intentionally left blank Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/26/2007 19:57:03 MDTNo repro
12、duction or networking permitted without license from IHS -,-,- so 366-3 : 1988 0 UDC 677.054.845.2 Descriptors : weaving, textile machinery, reeds (textiles), dimensions, designation. Price based on 2 pages Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/26/2007 19:57:03 MDTNo reproduction or networking permitted without license from IHS -,-,-