《NF-EN-10045-1-1990-ENG.pdf》由会员分享,可在线阅读,更多相关《NF-EN-10045-1-1990-ENG.pdf(10页珍藏版)》请在三一文库上搜索。
1、NF EN 10045-1 octobre 1990 Ce document est usage exclusif et non collectif des clients Saga Web. Toute mise en rseau, reproduction et rediffusion, sous quelque forme que ce soit, mme partielle, sont strictement interdites. This document is intended for the exclusive and non collective use of Saga We
2、b customers. All network exploitation, reproduction and re-dissemination,even partial, whatever the form (hardcopy or other media), is strictly prohibited. Saga Web Pour THALES CORPORATE SERVICES SAS - EPM Client 04988312 le 4/3/2009 09:03 AFNOR 1990AFNOR 19901st issue 90-10-P AFNOR 1990 All rights
3、reserved FE035741ISSN 0335-3931 NF EN 10045-1 October 1990 Classification index: A 03-011 French standard Published and distributed by Association Franaise de Normalisation (AFNOR French standard institute) 11, rue Francis de Pressens 93571 La Plaine Saint-Denis Cedex Tel.: + 33 (0)1 41 62 80 00 Fax
4、: + 33 (0)1 49 17 90 00 www.afnor.org ICS: 77.040.10 Metallic materials Charpy impact test Part 1: Test method F : Matriaux mtalliques Essai de flexion par choc sur prouvette Charpy Partie 1 : Mthode dessai D : Metallische Werkstoffe Kerbschlagbiegeversuch nach Charpy Teil 1: Prfverfahren French sta
5、ndard approved by decision of the Director General of AFNOR on September 5, 1990 taking effect on October 5, 1990. Replaces the approved standards NF A 03-156 dated November 1978 and NF A 03-161 dated June 1978. CorrespondenceThis standard resumes in full the text of the European standard EN 10045-1
6、. AnalysisThis European standard describes the Charpy impact test (U and V-notch) for determining flexural rupture energy; it defines the specimens, the essential characteristics of the test machine, and conditions for performing the test. This European standard is based on international standards I
7、SO 83 and ISO 148. DescriptorsTechnical International Thesaurus: mechanical tests, charpy impact tests, test specimens, testing conditions, designation, dimensional tolerances, characteristics. ModificationsWith respect to the standards of 1978, this standard does not allow the expression of the res
8、ult of the impact flexural test on Charpy specimen in terms of impact resistance (KCU, KCV). Corrections NF EN 10045-1:1990 2 National foreword References to French standards The correspondence between the standards figuring in chapter 2 “References“ and the French standards is as follows: ISO 286-1is not resumed in the French standard EN 10045-2 shall be subject to the 6 month investigation with the classification index A 03-012. Currently the French standard in effect has the index NF A 03-508.