《BS EN 14017-2005+A1-2008 Agricultural and forestry machinery — Solid fertilizer distributors — Safety1.pdf》由会员分享,可在线阅读,更多相关《BS EN 14017-2005+A1-2008 Agricultural and forestry machinery — Solid fertilizer distributors — Safety1.pdf(28页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD Agricultural and forestry machinery Solid fertilizer distributors Safety ICS 65.060.25 ? BS EN 14017:2005 +A1:2008 Licensed Copy: x x, The University of Sheffield, 28/06/2009 15:57, Uncontrolled Copy, (c) BSI National foreword BS EN 14017:2005+A1:2008 This British Standard is the UK
2、 implementation of EN 14017:2005+A1:2008. It supersedes BS EN 14017:2005 which is withdrawn. The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN a
3、mendment A1 is indicated by ?. The UK participation in its preparation was entrusted to Technical Committee AGE/32, Agrcultural implements and trailers. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all
4、 the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendmentsx/corrigenda/ issued since publicationThis British Standard was published under the authority of the Standards Polic
5、y and Startegy Committee ISBN Date Comments Implementation of CEN amendment A1:2008 on 31 May 2006 BSI 2009 978 0 580 67050 3 30 April 2009 Licensed Copy: x x, The University of Sheffield, 28/06/2009 15:57, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14017:2005+A1
6、 October 2008 ICS 65.060.25 Supersedes EN 14017:2005 English Version Agricultural and forestry machinery - Solid fertilizer distributors - Safety Matriel agricole et forestier - Distributeurs dengrais solides - Scurit Land- und Forstmaschinen - Mineraldngerstreuer - Sicherheit This European Standard
7、 was approved by CEN on 29 August 2005 and includes Amendment 1 approved by CEN on 9 August 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to
8、-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation unde
9、r the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,
10、Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management C
11、entre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14017:2005+A1:2008: E Licensed Copy: x x, The University of Sheffield, 28/06/2009 15:57, Uncontrolled Copy, (c) BSI EN 14017:2005+A1:20
12、08 (E) 2 Contents page Foreword3 Introduction.4 1 Scope 5 2 Normative references6 3 Terms and definitions .6 4 List of significant hazards 7 5 Safety requirements and/or protective measures8 5.1 General8 5.2 Stability when parked and for manual handling.8 5.2.1 General8 5.2.2 Mounted machines fitted
13、 with rollers for manual handling when dismounted.9 5.2.3 Machines with adjustable supporting devices.9 5.3 Distributing components 9 5.3.1 Swivelling and movable components9 5.3.2 Spreading plates and oscillating tubes.9 5.4 Feeding components guarding13 5.5 Loading.13 5.5.1 Safe access for loading
14、.13 5.5.2 Boarding means to loading location14 5.6 Checking of the hopper contents.15 5.7 Protection against ejection of fertilizer .16 5.8 Removal of the spreading device.16 5.9 Flow rate calibration system 16 5.10 Hitching and clearance zone16 5.11 Noise .18 5.11.1 Noise reduction as a safety requ
15、irement 18 5.11.2 Verification of requirements on noise based on noise emission values.18 6 Verification of the safety requirements and/or protective measures.18 6.1 Stability when parked and for manual handling.18 6.1.1 General18 6.1.2 Mounted machines fitted with rollers for manual handling when d
16、ismounted.18 6.2 Swivelling and movable components18 7 Information for use19 7.1 Instruction handbook19 7.2 Marking.20 Annex A (informative) Stability of the tractor distributor combination .21 Annex B (informative) Examples of pictograms 22 Annex ZA (informative) Relationship between this European
17、Standard and the Essential Requirements of EU Directive 98/37/EC, amended by Directive 98/79/EC24 Bibliography25 BS EN 14017:2005+A1:2008 Licensed Copy: x x, The University of Sheffield, 28/06/2009 15:57, Uncontrolled Copy, (c) BSI w w w . b z f x w . c o m EN 14017:2005+A1:2008 (E) 3 Foreword This
18、document (EN 14017:2005+A1:2008) has been prepared by Technical Committee CEN/TC 144 “Tractors and machinery for agriculture and forestry”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text o
19、r by endorsement, at the latest by April 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. This document includes Amendment 1, approved by CEN on 2008-08-14. This document supersedes EN 14017:2005. The start and finish of text introduced or altered by amendm
20、ent is indicated in the text by tags ! “. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is
21、 an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece
22、, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 14017:2005+A1:2008 Licensed Copy: x x, The University of Sheffield, 28/06/2009 15:57, Uncontrolled Copy,
23、(c) BSI w w w . b z f x w . c o m EN 14017:2005+A1:2008 (E) 4 Introduction This European Standard is a type C standard as stated in EN ISO 12100. The machinery concerned and the extent to which hazards, hazardous situations and hazardous events are covered are indicated in the scope of this European
24、 Standard. These hazards are specific to solid fertilizer distributors. Significant hazards that are common to all agricultural machines (self-propelled, mounted, semi-mounted and trailed) are dealt with in EN 1553:1999. When provisions of this type C standard are different from those which are stat
25、ed in type A or B standards, the provisions of this type C standard take precedence over the provisions of the other standards, for machines that have been designed and built according to the provisions of this type C standard. BS EN 14017:2005+A1:2008 Licensed Copy: x x, The University of Sheffield
26、, 28/06/2009 15:57, Uncontrolled Copy, (c) BSI w w w . b z f x w . c o m EN 14017:2005+A1:2008 (E) 5 1 Scope This European Standard, applied together with EN 1553:1999, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed or self-
27、propelled fertilizer distributors for solid fertilizer application, i.e. full width solid fertilizer distributors, solid fertilizer broadcasters, distributors with oscillating tube and line-distributors as well as solid fertilizer distributors driven by an auxiliary engine to be used by one operator
28、 only, used in agriculture, horticulture and in forestry. In addition, this European Standard specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer. When requirements of this European Standard are different from those which are stat
29、ed in EN 1553:1999 the requirements of this European Standard take precedence over the requirements of EN 1553:1999 for machines that have been designed and built according to the provisions of this European Standard. It does not apply to: combined seed and fertilizer drills; machines for distributi
30、ng granulated pesticides; pedestrian controlled distributors; knapsack distributors. This European Standard deals with all the significant hazards, hazardous situations and events relevant to solid fertilizer distributors, when they are used as intended and under the conditions foreseen by the manuf
31、acturer (see Clause 4), excepting the hazards arising from: inadequate lighting of moving/working area; inadequate visibility from drivers/operators position; inadequate seating; travelling functions (drive, braking etc.); rolling over; equipment for loading fertilizer into the machine; an auxiliary
32、 engine. It is not applicable to electromagnetic compatibility (EMC) nor to environmental hazards (except noise). These aspects are covered by EN 13739-1:2003, EN 13739-2:2003, EN 13740-1:2003 and EN 13740-2:2003. This European Standard is not applicable to solid fertilizer distributors which are ma
33、nufactured before the date of its publication as EN. BS EN 14017:2005+A1:2008 Licensed Copy: x x, The University of Sheffield, 28/06/2009 15:57, Uncontrolled Copy, (c) BSI w w w . b z f x w . c o m EN 14017:2005+A1:2008 (E) 6 2 Normative references The following referenced documents are indispensabl
34、e for the application of this European Standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 294:1992, Safety of machinery Safety distances to prevent danger zones being reached by
35、the upper limbs EN 1553:1999, Agricultural machinery Agricultural self-propelled, mounted, semi-mounted and trailed machines Common safety requirements EN 13739-1:2003, Agricultural machinery Solid fertilizer broadcasters and full width distributors Environmental protection Part 1: Requirements EN I
36、SO 11688-1:1998, Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning (ISO/TR 11688-1:1995) EN ISO 12100-1:2003, Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology (ISO 12100-1:2003) EN ISO 12100-2:2
37、003, Safety of machinery Basic concepts, general principles for design Part 2: Technical principles (ISO 12100-2:2003) 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in EN ISO 12100-1:2003 and the following apply. 3.1 solid fertilizer distributor
38、machine which spreads fertilizer in a continuous way on the soil surface and in the crop EN 13739-1:2003 3.2 full width solid fertilizer distributor solid fertilizer distributor which spreads fertilizer over the whole surface and which has a working width which is roughly the same as the machine wid
39、th EN 13739-1:2003 3.3 solid fertilizer broadcaster solid fertilizer distributor which spreads fertilizer over the whole surface and which has a working width which is essentially wider than the machine width EN 13739-1:2003 3.4 solid fertilizer line-distributor solid fertilizer distributor which sp
40、reads fertilizer in bands separated by bands without fertilizer and which has a working width which is roughly the same as the machine width EN 13739-1:2003 BS EN 14017:2005+A1:2008 Licensed Copy: x x, The University of Sheffield, 28/06/2009 15:57, Uncontrolled Copy, (c) BSI w w w . b z f x w . c o
41、m EN 14017:2005+A1:2008 (E) 7 4 List of significant hazards For the purposes of this European Standard, Table 1 gives, for defined danger zones, all the significant hazards, the hazardous situations and the significant hazardous events, covered by this European Standard, that have been identified by
42、 risk assessment as being significant for this type of machine, and which require specific action to eliminate or to reduce the risk. Table 1 List of significant hazards associated with solid fertilizer distributors Nr Hazard Location or event Clause/subclause of EN 1553:1999 Clause/subclause of thi
43、s European Standard 1.1 Crushing hazard Fall of the distributor or the spreading devices, folding or unfolding of the swivelling and movable components, calibration, hitching and insufficient clearance zone. 4.1.7.1, 4.2.2.2, 4.2.6.1, 4.3.2.3, 4.3.4.1 5.1, 5.2, 5.3.1.2, 5.8, 5.9, 5.10, 7.1 1.2 Shear
44、ing hazard Folding or unfolding of the swivelling and movable components, contact with distributing swivelling and movable components or with agitator 4.1.7.3, 4.2.2.2 5.1, 5.3.1.2, 5.3.2.1, 7.1, 7.2 1.3 Cutting or severing hazard Folding or unfolding of the swivelling and movable components, contac
45、t with distributing components or with agitator 4.1.1, 4.1.7.1, 4.2.6.1, 4.3.2.3, 4.3.4.1 5.1, 5.3.1.2, 5.3.2.1, 7.1, 7.2 1.4 Entanglement hazard Fall of the distributor on the operator, contact with distributing components or with agitator 4.1.1, 4.1.7.1, 4.2.6.1, 4.3.2.3, 4.3.4.1 5.1, 5.3.2.1, 5.4
46、, 5.9, 7.1, 7.2 1.5 Drawing-in or trapping hazard Fall of the distributor on the operator, contact with agitator - 5.1, 5.4, 5.9, 7.1 1.6 Impact hazard lack of stability, hitching and insufficient clearance zone 4.1.1, 4.1.7.1, 4.1.7.3, 4.2.6.1, 4.3.2.3, 4.3.4.1 5.1, 5.2, 5.3.1.2, 5.3.2, 5.10, 6.1 1
47、.9 High pressure fluid injection or ejection hazard Rupture of pressurised hoses 4.1.8.2 - 2.2 Contact of persons with parts which have become live under faulty conditions (indirect contact) Contact of the swivelling and movable components with overhead power line - 5.3.1.1, 7.1, 7.2 2.3 Approach to
48、 live parts under high voltage Contact of the swivelling and movable components with overhead power line - 5.3.1.1, 7.1, 7.2 4.1 Hearing loss (deafness), other physiological disorders (e.g. loss of balance, loss of awareness) Hearing damage due to the working of the machine 4.1.2, Annex D 5.11, 7.1
49、7.1 Hazards resulting from contact with or inhalation of harmful fluids, gases, mists, fumes and dusts Leakage of fuel, contact with operating fluid, ejection of solid fertilizer 4.2.5.2, 4.2.6.2, 4.3.4.2, 5.1 5.7, 7.1 BS EN 14017:2005+A1:2008 Licensed Copy: x x, The University of Sheffield, 28/06/2009 15:57, Uncontrolled Copy, (c) BSI w w w . b z f x w . c o m EN 14017:2005+A1:2008 (E) 8 Table 1 List of significant hazards associated with so