《BS-EN-12697-29-2002.pdf》由会员分享，可在线阅读，更多相关《BS-EN-12697-29-2002.pdf（10页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 12697-29:2002 Bituminous mixtures Test methods for hot mix asphalt Part 29: Determination of the dimensions of a bituminous specimen The European Standard EN 12697-29:2002 has the status of a British Standard ICS 93.080; 93.080.20 ? Licensed Copy: sheffieldun sheffieldun, na,
2、Sat Oct 28 09:59:44 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 12697-29:2002 This British Standard, having been prepared under the direction of the Building and Civil Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Commit
3、tee on 11 October 2002 BSI 11 October 2002 ISBN 0 580 40535 4 National foreword This British Standard is the official English language version of EN 12697-29:2002. The UK participation in its preparation was entrusted by Technical Committee B/510, Road materials, to Subcommittee B/510/1, Coated maca
4、dam and hot asphalt, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the B
5、SI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for
6、 its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK inte
7、rests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 7 and a back cover. The BSI copyright date displayed in this document indicates when the
8、 document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 09:59:44 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12697-29 September 2002 ICS 93.080; 93.080.20 English v
9、ersion Bituminous mixtures - Test method for hot mix asphalt - Part 29: Determination of the dimensions of a bituminous specimen Mlanges bitumineux - Mthodes dessai pour mlange hydrocarbon chaud - Partie 29: Dtermination des dimensions des prouvettes denrobes hydrocarbons Asphalt - Prfverfahren fr H
10、eiasphalt - Teil 29: Bestimmung der Mae von Asphalt-Probekrpern This European Standard was approved by CEN on 1 August 2002. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard wi
11、thout any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language m
12、ade by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland,
13、 Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2002 CENAll rights of exploita
14、tion in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12697-29:2002 E Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 09:59:44 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 12697-29:2002 (E) 2 Contents page Foreword3 1Scope 6 2Apparatus .6 3Procedure .6 4T
15、est report 7 5Precision.7 Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 09:59:44 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 12697-29:2002 (E) 3 Foreword This document EN 12697-29:2002 has been prepared by Technical Committee CEN/TC 227 “Road materials“, the secretariat of which is held b
16、y DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2003, and conflicting national standards shall be withdrawn at the latest by April 2005. This European Standard is one of a series of s
17、tandards as listed below. EN 12697-1, Bituminous mixtures Test methods for hot mix asphalt Part 1: Soluble binder content EN 12697-2, Bituminous mixtures Test methods for hot mix asphalt Part 2: Determination of particle size distribution EN 12697-3, Bituminous mixtures Test methods for hot mix asph
18、alt Part 3: Bitumen recovery: Rotary evaporator EN 12697-4, Bituminous mixtures Test methods for hot mix asphalt Part 4: Bitumen recovery: Fractionating column EN 12697-5, Bituminous mixtures - Test methods for hot mix asphalt - Part 5: Determination of the maximum density prEN 12697-6, Bituminous m
19、ixtures Test methods for hot mix asphalt Part 6: Determination of bulk density of bituminous specimens by hydro-static method EN 12697-7, Bituminous mixtures Test methods for hot mix asphalt Part 7: Determination of bulk density of bituminous specimens by gamma rays prEN 12697-8, Bituminous mixtures
20、 Test methods for hot mix asphalt Part 8: Determination of void characteristics of bituminous specimens prEN 12697-9, Bituminous mixtures Test methods for hot mix asphalt Part 9: Determination of the reference density EN 12697-10, Bituminous mixtures Test methods for hot mix asphalt Part 10: Compact
21、ibility prEN 12697-11, Bituminous mixtures Test methods for hot mix asphalt Part 11: Determination of the compatibility between aggregates and bitumen prEN 12697-12, Bituminous mixtures Test methods for hot mix asphalt Part 12: Determination of the water sensitivity of bituminous specimens EN 12697-
22、13, Bituminous mixtures Test methods for hot mix asphalt Part 13: Temperature measurement EN 12697-14, Bituminous mixtures Test methods for hot mix asphalt Part 14: Water content prEN 12697-15, Bituminous mixtures Test methods for hot mix asphalt Part 15: Determination of the segregation sensitivity
23、 of bituminous mixtures prEN 12697-16, Bituminous mixtures Test methods for hot mix asphalt Part 16: Abrasion by studded tyres Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 09:59:44 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 12697-29:2002 (E) 4 prEN 12697-17, Bituminous mixtures Test met
24、hods for hot mix asphalt Part 17: Particle loss of porous asphalt specimen prEN 12697-18, Bituminous mixtures Test methods for hot mix asphalt Part 18: Binder drainage from porous asphalt prEN 12697-19, Bituminous mixtures Test methods for hot mix asphalt Part 19: Permeability of specimen prEN 12697
25、-20, Bituminous mixtures Test methods for hot mix asphalt Part 20: Indentation using cube or marshall specimens prEN 12697-21, Bituminous mixtures Test methods for hot mix asphalt Part 21: Indentation using plate specimens prEN 12697-22, Bituminous mixtures Test methods for hot mix asphalt Part 22:
26、Wheel tracking prEN 12697-23, Bituminous mixtures Test methods for hot mix asphalt Part 23 Determination of the indirect tensile strength of bituminous specimens prEN 12697-24, Bituminous mixtures Test methods for hot mix asphalt Part 24: Resistance to fatigue prEN 12697-25, Bituminous mixtures Test
27、 methods for hot mix asphalt Part 25: Dynamic creep test prEN 12697-26, Bituminous mixtures Test methods for hot mix asphalt Part 26: Stiffness EN 12697-27, Bituminous mixtures Test methods for hot mix asphalt Part 27: Sampling EN 12697-28, Bituminous mixtures Test methods for hot mix asphalt Part 2
28、8: Preparation of samples for determining binder content, water content and grading prEN 12697-29, Bituminous mixtures Test methods for hot mix asphalt Part 29: Determination of the dimensions of bituminous specimen prEN 12697-30, Bituminous mixtures Test methods for hot mix asphalt Part 30: Specime
29、n preparation, impact compactor prEN 12697-31, Bituminous mixtures Test methods for hot mix asphalt Part 31: Specimen preparation gyratory compactor prEN 12697-32, Bituminous mixtures Test methods for hot mix asphalt Part 32: Laboratory compaction of bituminous mixtures by a vibratory compactor prEN
30、 12697-33, Bituminous mixtures Test methods for hot mix asphalt Part 33: Specimen preparation slab compactor prEN 12697-34, Bituminous mixtures Test methods for hot mix asphalt Part 34: Marshall test prEN 12697-35, Bituminous mixtures Test methods for hot mix asphalt Part 35: Laboratory mixing prEN
31、12697-36, Bituminous mixtures Test methods for hot mix asphalt Part 36: Method for the determination of the thickness of a bituminous pavement prEN 12697-37, Bituminous mixtures Test methods for hot mix asphalt Part 37: Hot sand test for the adhesivity of binder on precoated chippings for HRA prEN 1
32、2697-38, Bituminous mixtures Test methods for hot mix asphalt Part 38: Test equipment and calibration prEN 12697-39, Bituminous mixtures Test methods for hot mix asphalt Part 39: Soluble binder content of mixtures by ignition method Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 09:59:44 GMT
33、+00:00 2006, Uncontrolled Copy, (c) BSI EN 12697-29:2002 (E) 5 prEN 12697-40, Bituminous mixtures Test methods for hot mix asphalt Part 40: Void content, compaction and hydraulic conductivity of material in the layer prEN 12697-41, Bituminous mixtures Test methods for hot mix asphalt Part 41: Resist
34、ance to deicing fluid prEN 12697-42, Bituminous mixtures Test methods for hot mix asphalt Part 42: Content of foreign matters in reclaimed asphalt prEN 12697-43, Bituminous mixtures Test methods for hot mix asphalt Part 43: Resistance to fuel prEN 12697-44, Bituminous mixtures Test methods for hot m
35、ix asphalt Part 44: Binder content of mixtures with modified binders prEN 12697-45, Bituminous mixtures Test methods for hot mix asphalt Part 45: Binder drainage Schellenberg method According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are
36、 bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 2
37、8 09:59:44 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 12697-29:2002 (E) 6 1 Scope This European Standard specifies a test method for determining the dimensions of cylindrical, rectangular or non- rectangular bituminous test specimens by measurement. The applicability of this European Standard is
38、described in the product standards for bituminous mixtures. The test is applicable to laboratory-made specimens, trimmed by sawing, or specimens from cores cut from the road, trimmed by sawing. 2 Apparatus 2.1Calliper gauge. 2.2Approved jig or other device. 3 Procedure NOTEThe measurements should pr
39、eferably be made with the specimen standing firmly on its upper face in a vertical position. Alternatively the specimen can be laid on a level surface in a horizontal position and rolled as necessary to permit the taking of all measurements. 3.1 Measurement of height 3.1.1Take four measurements even
40、ly spaced around the perimeter of each specimen. The position of these measurements shall be clearly marked along each specimen. All measurements shall have a limit deviation of 0,1 mm. 3.1.2Each measurement shall be made approximately 10 mm in from the edge of the specimen. 3.1.3Define the average
41、of the four measurements as the height of the specimen and express it to the nearest 0,1 mm. 3.2 Measurement of diameter 3.2.1Take two measurements perpendicular to each other at the top, the middle and the bottom of the specimen. All measurements shall have a limit deviation of 0,1 mm. 3.2.2Define
42、the average of the six measurements as the diameter of the specimen and express it to the nearest 0,1 mm. 3.3 Measurement of (non)-rectangular specimens 3.3.1Take four measurements evenly spaced around the perimeter of each specimen in each direction (height, width and depth). If the dimensions in o
43、ne or more directions change substantially (e.g. a two point bending test specimen) the number of measurements in that direction shall be extended in such a way that the volume of the specimen can always be calculated. The position of the measurements shall be clearly marked along each specimen. All
44、 measurements shall have a limit deviation of 0,1 mm. 3.3.2Each measurement shall be made near the edges of the specimen. Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 09:59:44 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 12697-29:2002 (E) 7 3.3.3Define the average of the four measurements
45、 as the dimension of the specimen in a given direction and express it to the nearest 0,1 mm. NOTEIt is possible that in one direction more than one average value can be calculated. 4 Test report With reference to this European Standard the report shall include the following information: a) measureme
46、nt procedure used; b) relevant dimensions of each specimen, reported to the nearest 0,1 mm. 5 Precision NOTEThe precision of this test has not yet been established. Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 09:59:44 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 12697-29:2002 BSI 389
47、Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are upd
48、ated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers autom