《BS-EN-55016-1-4-2004.pdf》由会员分享，可在线阅读，更多相关《BS-EN-55016-1-4-2004.pdf（80页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 55016-1-4:2004 Incorporating Amendment No. 1 Specification for radio disturbance and immunity measuring apparatus and methods Part 1-4: Radio disturbance and immunity measuring apparatus Ancillary equipment Radiated disturbances The European Standard EN 55016-1-4:2004, with th
2、e incorporation of amendments A1:2005 and A2:2005, has the status of a British Standard ICS 33.100.10; 33.100.20 ? Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 06 08:34:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 55016-1-4:2004 This British Standard was published under the authority o
3、f the Standards Policy and Strategy Committee on 21 January 2005 BSI 2006 ISBN 0 580 45220 4 National foreword This British Standard is the official English language version of EN 55016-1-4:2004, including amendments A1:2005 and A2:2005. It is identical with CISPR 16-1-4:2003, including amendments 1
4、:2004 and 2:2005 and Corrigendum February 2005. Together with BS EN 55016-1-1:2004, BS EN 55016-1-2:2004, BS EN 55016-1-3:2004 and BS EN 55016-1-5:2004 it supersedes BS CISPR 16-1:1999 which will be withdrawn on 2007-09-01. The start and finish of text introduced or altered by IEC amendment is indic
5、ated in the text by tags !“. Tags indicating changes to IEC text carry the number of the IEC amendment. For example, text altered by IEC amendment 1 is indicated by !“. The standards in the new BS EN 55016 series referred to above have been produced following the publication by CISPR of a new multi-
6、part edition of CISPR 16 and constitute an editorial reorganisation of CISPR 16 without technical changes. This has resulted in the BS CISPR 16 series being replaced as follows: BS CISPR 16-1:1999 replaced by BS EN 55016-1-1:2004, BS EN 55016-1-2:2004, BS EN 55016-1-3:2004, BS EN 55016-1-4:2004 and
7、BS EN 55016-1-5:2004. BS CISPR 16-2:1996 replaced by BS EN 55016-2-1:2004, BS EN 55016-2-2:2004, BS EN 55016-2-3:2004 and BS EN 55016-2-4:2004. BS CISPR 16-3:2000 replaced by PD CISPR/TR 16-3:2003, PD CISPR/TR 16-4-1:2003, PD CISPR/TR 16-4-3:2003 and PD CISPR/TR 16-4-4:2003. BS CISPR 16-4:2002 repla
8、ced by BS EN 55016-4-2:2004. The UK participation in its preparation was entrusted by Technical Committee GEL/210, EMC Policy, to Subcommittee GEL/210/12, EMC Basic and generic standards, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on req
9、uest to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI
10、Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pa
11、ges aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. This document
12、 comprises a front cover, an inside front cover, the EN title page, pages 2 to 77 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments 1568831 May 2006See national foreword License
13、d Copy: sheffieldun sheffieldun, na, Mon Nov 06 08:34:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD EN 55016-1-4 NORME EUROPENNE EUROPISCHE NORM October 2004 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches
14、Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 55016-1-4:2004 + A1:2005 + A2:2005 E ICS 33.100.10; 33.100.20 English version Spe
15、cification for radio disturbance and immunity measuring apparatus and methods Part 1-4: Radio disturbance and immunity measuring apparatus Ancillary equipment Radiated disturbances (CISPR 16-1-4:2003 + A1:2004 + A2:2005) Spcifications des mthodes et des appareils de mesure des perturbations radiolec
16、triques et de limmunit aux perturbations radiolectriques Partie 1-4: Appareils de mesure des perturbations radiolectriques et de limmunit aux perturbations radiolectriques Matriels auxiliaires Perturbations rayonnes (CISPR 16-1-4:2003 + A1:2004 + A2:2005) Anforderungen an Gerte und Einrichtungen sow
17、ie Festlegung der Verfahren zur Messung der hochfrequenten Straussendung (Funkstrungen) und Strfestigkeit Teil 1-4: Gerte und Einrichtungen zur Messung der hochfrequenten Straussendung (Funkstrungen) und Strfestigkeit Zusatz-/Hilfseinrichtungen Gestrahlte Straussendung (CISPR 16-1-4:2003 + A1:2004 +
18、 A2:2005) This European Standard was approved by CENELEC on 2004-09-01. Amendment A1 was approved by CENELEC on 2005-03-01 and amendment A2 was approved by CENELEC on 2005-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving t
19、his European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versi
20、ons (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of
21、Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. + A1 March 2005 + A2 Decembe
22、r 2005 (includes amendments A1:2005 and A2:2005) (inclut les amendements A1:2005 et A2:2005) (enthlt nderungen A1:2005 und A2:2005) Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 06 08:34:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Foreword The text of the International Standard CISPR 16-1-4:
23、2003, prepared by CISPR SCA, Radio- interference measurements and statistical methods, was submitted to the formal vote and was approved by CENELEC as EN 55016-1-4 on 2004-09-01 without any modification. The following dates were fixed: latest date by which the EN has to be implemented at national le
24、vel by publication of an identical national standard or by endorsement (dop) 2005-09-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2007-09-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard CISPR 16-1
25、-4:2003 was approved by CENELEC as a European Standard without any modification. _ Foreword to amendment A1 The text of amendment 1:2004 to the International Standard CISPR 16-1-4:2003, prepared by CISPR SC A, Radio-interference measurements and statistical methods, was submitted to the Unique Accep
26、tance Procedure and was approved by CENELEC as amendment A1 to EN 55016-1-4:2004 on 2005-03-01 without any modification. The following dates were fixed: latest date by which the amendment has to be implemented at national level by publication of an identical national standard or by endorsement (dop)
27、 2006-03-01 latest date by which the national standards conflicting with the amendment have to be withdrawn (dow) 2008-03-01 _ Endorsement notice The text of amendment 1:2004 to the International Standard CISPR 16-1-4:2003 was approved by CENELEC as an amendment to the European Standard without any
28、modification. _ Page 2 EN 55016-1-4:2004 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 06 08:34:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Foreword to amendment A2 The text of document CISPR/A/614/FDIS, future amendment 2 to CISPR 16-1-4:2003, prepared by CISPR SC A, Radio-interference meas
29、urements and statistical methods, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A2 to EN 55016-1-4:2004 on 2005-12-01. The following dates were fixed: latest date by which the amendment has to be implemented at national level by publication of an identical n
30、ational standard or by endorsement (dop) 2006-09-01 latest date by which the national standards conflicting with the amendment have to be withdrawn (dow) 2008-12-01 _ Endorsement notice The text of amendment 2:2005 to the International Standard CISPR 16-1-4:2003 was approved by CENELEC as an amendme
31、nt to the European Standard without any modification. _ Page 3 EN 55016-1-4:2004 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 06 08:34:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI CONTENTS INTRODUCTION 5 TABLE RECAPITULATING CROSS REFERENCES.6 1 Scope 7 2 Normative references .7 3 Definition
32、s8 4 Antennas for measurement of radiated radio disturbance 10 5 Test sites for measurement of radio disturbance field strength for the frequency range of 30 MHz to 1 000 MHz .17 6 Reverberating chamber for total radiated power measurement 40 7 TEM cells for immunity to radiated disturbance measurem
33、ent .42 8 Test sites for measurement of radio disturbance field strength for the frequency range 1 GHz to 18 GHz 42 Annex A (normative) Parameters of broadband antennas 44 Annex B (normative) Monopole (1 m rod antenna) performance equations and characterization of the associated antenna matching net
34、work .48 Annex C (normative) Loop antenna system for magnetic field induced current measurements in the frequency range of 9 kHz to 30 MHz 53 Annex D (informative) Construction details for open area test sites in the frequency range of 30 MHz to 1 000 MHz (clause 5) .62 Annex E (normative) Validatio
35、n procedure of the open area test site for the frequency range of 30 MHz to 1 000 MHz (clause 5) .66 Annex F (informative) Basis for 4 dB site acceptability criterion (clause 5)74 Bibliography .76 Page 4 EN 55016-1-4:2004 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 06 08:34:24 GMT+00:00 2006
36、, Uncontrolled Copy, (c) BSI INTRODUCTION CISPR 16-1, CISPR 16-2, CISPR 16-3 and CISPR 16-4 have been reorganised into 14 parts, to accommodate growth and easier maintenance. The new parts have also been renumbered. See the list given below. Statistical considerations in the determination of EMC com
37、pliance of mass- produced products Statistics of complaints and a model for the calculation of limits CISPR 16-1-3Ancillary equipment Disturbance power Ancillary equipment Conducted disturbances CISPR 16-1-2 CISPR 16-4-2 Antenna calibration test sites for 30 MHz to 1 000 MHz Old CISPR 16 publication
38、s Radio disturbance and immunity measuring apparatus Measuring apparatus CISPR 16-2-1 New CISPR 16 publications CISPR 16-1 CISPR 16-1-5 Conducted disturbance measurements CISPR 16-2-2 Measurement of disturbance power CISPR 16-2-3Radiated disturbance measurements CISPR 16-2 Methods of measurement of
39、disturbances and immunity CISPR 16-2-4 Immunity measurements CISPR 16-3CISPR technical reports CISPR 16-4-1Uncertainties in standardised EMC tests Measurement instrumentation uncertainty CISPR 16-3 Reports and recommendations of CISPR CISPR 16-4-3 CISPR 16-4 Uncertainty in EMC measurements CISPR 16-
40、4-4 CISPR 16-1-1 CISPR 16-1-4 Ancillary equipment Radiated disturbances More specific information on the relation between the old CISPR 16-1 and the present new CISPR 16-1-4 is given in the table after this introduction (TABLE RECAPITULATING CROSS REFERENCES). Measurement instrumentation specificati
41、ons are given in five new parts of CISPR 16-1, while the methods of measurement are covered now in four new parts of CISPR 16-2. Various reports with further information and background on CISPR and radio disturbances in general are given in CISPR 16-3. CISPR 16-4 contains information related to unce
42、rtainties, statistics and limit modelling. CISPR 16-1 consists of the following parts, under the general title Specification for radio disturbance and immunity measuring apparatus and methods Radio disturbance and immunity measuring apparatus: Part 1-1: Measuring apparatus, Part 1-2: Ancillary equip
43、ment Conducted disturbances, Part 1-3: Ancillary equipment Disturbance power, Part 1-4: Ancillary equipment Radiated disturbances, Part 1-5: Antenna calibration test sites for 30 MHz to 1 000 MHz. Page 5 EN 55016-1-4:2004 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 06 08:34:24 GMT+00:00 2006
44、, Uncontrolled Copy, (c) BSI TABLE RECAPITULATING CROSS REFERENCES Second edition of CISPR 16-1 First edition of CISPR 16-1-4 Clauses, subclauses Clauses, subclauses 1 1 2 2 3 3 5.5 4 5.6 5 5.7 6 5.9 7 5.12 8 Annexes Annexes O A X B P C K D G E L F Figures Figures 13, , 17 1, , 5 51 6 18,19 7,8 43 B
45、.1 P.1, ., P.11 C.1, ., C.11 Tables Tables 16,17 1,2 Page 6 EN 55016-1-4:2004 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 06 08:34:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS Part 1-4: Radio disturbance and im
46、munity measuring apparatus Ancillary equipment Radiated disturbances 1 Scope This part of CISPR 16 is designated a basic standard, which specifies the characteristics and performance of equipment for the measurement of radiated disturbances in the frequency range 9 kHz to 18 GHz. Specifications for
47、ancillary apparatus are included for: antennas and test sites, TEM cells, and reverberating chambers. The requirements of this publication shall be complied with at all frequencies and for all levels of radiated disturbances within the CISPR indicating range of the measuring equipment. Methods of me
48、asurement are covered in Part 2-3, and further information on radio disturbance is given in Part 3 of CISPR 16. Uncertainties, statistics and limit modelling are covered in Part 4 of CISPR 16. 2 Normative references The following referenced documents are indispensable for the application of this doc
49、ument. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. CISPR 14-1:2000, Electromagnetic compatibility Requirements for household appliances, electric tools and similar apparatus Part 1: Emission CISPR 16-1-1:2003, Specification